[U-Boot] [PATCH 9/9] ARM: zynq: Move spi node to aligned location
Michal Simek
michal.simek at xilinx.com
Thu Jan 14 14:45:00 CET 2016
From: Michal Simek <monstr at monstr.eu>
Keep nodes aligned.
Signed-off-by: Michal Simek <monstr at monstr.eu>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
arch/arm/dts/zynq-zc770-xm011.dts | 12 ++++++------
arch/arm/dts/zynq-zc770-xm012.dts | 12 ++++++------
arch/arm/dts/zynq-zc770-xm013.dts | 30 +++++++++++++++---------------
3 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts
index ae54519630bf..4fed2215365c 100644
--- a/arch/arm/dts/zynq-zc770-xm011.dts
+++ b/arch/arm/dts/zynq-zc770-xm011.dts
@@ -33,12 +33,6 @@
};
};
-&spi0 {
- status = "okay";
- num-cs = <4>;
- is-decoded-cs = <0>;
-};
-
&can0 {
status = "okay";
};
@@ -53,6 +47,12 @@
};
};
+&spi0 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+};
+
&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts
index 3c50b99933fe..8d69f0e0f5ef 100644
--- a/arch/arm/dts/zynq-zc770-xm012.dts
+++ b/arch/arm/dts/zynq-zc770-xm012.dts
@@ -30,12 +30,6 @@
};
};
-&spi1 {
- status = "okay";
- num-cs = <4>;
- is-decoded-cs = <0>;
-};
-
&can1 {
status = "okay";
};
@@ -60,6 +54,12 @@
};
};
+&spi1 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+};
+
&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts
index 5077cdbc3e46..77fdfcc00947 100644
--- a/arch/arm/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/dts/zynq-zc770-xm013.dts
@@ -30,21 +30,6 @@
};
};
-&spi0 {
- status = "okay";
- num-cs = <4>;
- is-decoded-cs = <0>;
- eeprom: at25 at 0 {
- at25,byte-len = <8192>;
- at25,addr-mode = <2>;
- at25,page-size = <32>;
-
- compatible = "atmel,at25";
- reg = <2>;
- spi-max-frequency = <1000000>;
- };
-};
-
&can1 {
status = "okay";
};
@@ -73,6 +58,21 @@
};
};
+&spi0 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+ eeprom: at25 at 0 {
+ at25,byte-len = <8192>;
+ at25,addr-mode = <2>;
+ at25,page-size = <32>;
+
+ compatible = "atmel,at25";
+ reg = <2>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
&uart0 {
u-boot,dm-pre-reloc;
status = "okay";
--
1.9.1
More information about the U-Boot
mailing list