[U-Boot] [PATCH 14/23] tegra: video: Merge the display driver into one file
Simon Glass
sjg at chromium.org
Thu Jan 14 19:28:26 CET 2016
At present we have code in arch/arm and code in drivers/video. Move it all
into drivers/video since it is a display driver and our current approach is
to put all driver code in drivers/.
Make a few functions static now that they are not used outside the file.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
arch/arm/include/asm/arch-tegra20/display.h | 21 --
arch/arm/mach-tegra/tegra20/Makefile | 2 -
arch/arm/mach-tegra/tegra20/display.c | 378 --------------------------
drivers/video/tegra.c | 396 ++++++++++++++++++++++++++++
4 files changed, 396 insertions(+), 401 deletions(-)
diff --git a/arch/arm/include/asm/arch-tegra20/display.h b/arch/arm/include/asm/arch-tegra20/display.h
index 018c9f9..35123ed 100644
--- a/arch/arm/include/asm/arch-tegra20/display.h
+++ b/arch/arm/include/asm/arch-tegra20/display.h
@@ -88,27 +88,6 @@ struct fdt_panel_config {
};
/**
- * Register a new display based on device tree configuration.
- *
- * The frame buffer can be positioned by U-Boot or overriden by the fdt.
- * You should pass in the U-Boot address here, and check the contents of
- * struct fdt_disp_config to see what was actually chosen.
- *
- * @param blob Device tree blob
- * @param default_lcd_base Default address of LCD frame buffer
- * @return 0 if ok, -1 on error (unsupported bits per pixel)
- */
-int tegra_display_probe(const void *blob, void *default_lcd_base);
-
-/**
- * Return the current display configuration
- *
- * @return pointer to display configuration, or NULL if there is no valid
- * config
- */
-struct fdt_disp_config *tegra_display_get_config(void);
-
-/**
* Perform the next stage of the LCD init if it is time to do so.
*
* LCD init can be time-consuming because of the number of delays we need
diff --git a/arch/arm/mach-tegra/tegra20/Makefile b/arch/arm/mach-tegra/tegra20/Makefile
index efcf843..17c1990 100644
--- a/arch/arm/mach-tegra/tegra20/Makefile
+++ b/arch/arm/mach-tegra/tegra20/Makefile
@@ -6,8 +6,6 @@
ifdef CONFIG_SPL_BUILD
obj-y += cpu.o
-else
-obj-$(CONFIG_VIDEO_TEGRA20) += display.o
endif
# The AVP is ARMv4T architecture so we must use special compiler
diff --git a/arch/arm/mach-tegra/tegra20/display.c b/arch/arm/mach-tegra/tegra20/display.c
index b7605ff..73be9a9 100644
--- a/arch/arm/mach-tegra/tegra20/display.c
+++ b/arch/arm/mach-tegra/tegra20/display.c
@@ -14,381 +14,3 @@
#include <asm/arch-tegra/clk_rst.h>
#include <asm/arch-tegra/timer.h>
-static struct fdt_disp_config config;
-
-static void update_window(struct dc_ctlr *dc, struct disp_ctl_win *win)
-{
- unsigned h_dda, v_dda;
- unsigned long val;
-
- val = readl(&dc->cmd.disp_win_header);
- val |= WINDOW_A_SELECT;
- writel(val, &dc->cmd.disp_win_header);
-
- writel(win->fmt, &dc->win.color_depth);
-
- clrsetbits_le32(&dc->win.byte_swap, BYTE_SWAP_MASK,
- BYTE_SWAP_NOSWAP << BYTE_SWAP_SHIFT);
-
- val = win->out_x << H_POSITION_SHIFT;
- val |= win->out_y << V_POSITION_SHIFT;
- writel(val, &dc->win.pos);
-
- val = win->out_w << H_SIZE_SHIFT;
- val |= win->out_h << V_SIZE_SHIFT;
- writel(val, &dc->win.size);
-
- val = (win->w * win->bpp / 8) << H_PRESCALED_SIZE_SHIFT;
- val |= win->h << V_PRESCALED_SIZE_SHIFT;
- writel(val, &dc->win.prescaled_size);
-
- writel(0, &dc->win.h_initial_dda);
- writel(0, &dc->win.v_initial_dda);
-
- h_dda = (win->w * 0x1000) / max(win->out_w - 1, 1U);
- v_dda = (win->h * 0x1000) / max(win->out_h - 1, 1U);
-
- val = h_dda << H_DDA_INC_SHIFT;
- val |= v_dda << V_DDA_INC_SHIFT;
- writel(val, &dc->win.dda_increment);
-
- writel(win->stride, &dc->win.line_stride);
- writel(0, &dc->win.buf_stride);
-
- val = WIN_ENABLE;
- if (win->bpp < 24)
- val |= COLOR_EXPAND;
- writel(val, &dc->win.win_opt);
-
- writel((unsigned long)win->phys_addr, &dc->winbuf.start_addr);
- writel(win->x, &dc->winbuf.addr_h_offset);
- writel(win->y, &dc->winbuf.addr_v_offset);
-
- writel(0xff00, &dc->win.blend_nokey);
- writel(0xff00, &dc->win.blend_1win);
-
- val = GENERAL_ACT_REQ | WIN_A_ACT_REQ;
- val |= GENERAL_UPDATE | WIN_A_UPDATE;
- writel(val, &dc->cmd.state_ctrl);
-}
-
-static void write_pair(struct fdt_disp_config *config, int item, u32 *reg)
-{
- writel(config->horiz_timing[item] |
- (config->vert_timing[item] << 16), reg);
-}
-
-static int update_display_mode(struct dc_disp_reg *disp,
- struct fdt_disp_config *config)
-{
- unsigned long val;
- unsigned long rate;
- unsigned long div;
-
- writel(0x0, &disp->disp_timing_opt);
- write_pair(config, FDT_LCD_TIMING_REF_TO_SYNC, &disp->ref_to_sync);
- write_pair(config, FDT_LCD_TIMING_SYNC_WIDTH, &disp->sync_width);
- write_pair(config, FDT_LCD_TIMING_BACK_PORCH, &disp->back_porch);
- write_pair(config, FDT_LCD_TIMING_FRONT_PORCH, &disp->front_porch);
-
- writel(config->width | (config->height << 16), &disp->disp_active);
-
- val = DE_SELECT_ACTIVE << DE_SELECT_SHIFT;
- val |= DE_CONTROL_NORMAL << DE_CONTROL_SHIFT;
- writel(val, &disp->data_enable_opt);
-
- val = DATA_FORMAT_DF1P1C << DATA_FORMAT_SHIFT;
- val |= DATA_ALIGNMENT_MSB << DATA_ALIGNMENT_SHIFT;
- val |= DATA_ORDER_RED_BLUE << DATA_ORDER_SHIFT;
- writel(val, &disp->disp_interface_ctrl);
-
- /*
- * The pixel clock divider is in 7.1 format (where the bottom bit
- * represents 0.5). Here we calculate the divider needed to get from
- * the display clock (typically 600MHz) to the pixel clock. We round
- * up or down as requried.
- */
- rate = clock_get_periph_rate(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL);
- div = ((rate * 2 + config->pixel_clock / 2) / config->pixel_clock) - 2;
- debug("Display clock %lu, divider %lu\n", rate, div);
-
- writel(0x00010001, &disp->shift_clk_opt);
-
- val = PIXEL_CLK_DIVIDER_PCD1 << PIXEL_CLK_DIVIDER_SHIFT;
- val |= div << SHIFT_CLK_DIVIDER_SHIFT;
- writel(val, &disp->disp_clk_ctrl);
-
- return 0;
-}
-
-/* Start up the display and turn on power to PWMs */
-static void basic_init(struct dc_cmd_reg *cmd)
-{
- u32 val;
-
- writel(0x00000100, &cmd->gen_incr_syncpt_ctrl);
- writel(0x0000011a, &cmd->cont_syncpt_vsync);
- writel(0x00000000, &cmd->int_type);
- writel(0x00000000, &cmd->int_polarity);
- writel(0x00000000, &cmd->int_mask);
- writel(0x00000000, &cmd->int_enb);
-
- val = PW0_ENABLE | PW1_ENABLE | PW2_ENABLE;
- val |= PW3_ENABLE | PW4_ENABLE | PM0_ENABLE;
- val |= PM1_ENABLE;
- writel(val, &cmd->disp_pow_ctrl);
-
- val = readl(&cmd->disp_cmd);
- val |= CTRL_MODE_C_DISPLAY << CTRL_MODE_SHIFT;
- writel(val, &cmd->disp_cmd);
-}
-
-static void basic_init_timer(struct dc_disp_reg *disp)
-{
- writel(0x00000020, &disp->mem_high_pri);
- writel(0x00000001, &disp->mem_high_pri_timer);
-}
-
-static const u32 rgb_enb_tab[PIN_REG_COUNT] = {
- 0x00000000,
- 0x00000000,
- 0x00000000,
- 0x00000000,
-};
-
-static const u32 rgb_polarity_tab[PIN_REG_COUNT] = {
- 0x00000000,
- 0x01000000,
- 0x00000000,
- 0x00000000,
-};
-
-static const u32 rgb_data_tab[PIN_REG_COUNT] = {
- 0x00000000,
- 0x00000000,
- 0x00000000,
- 0x00000000,
-};
-
-static const u32 rgb_sel_tab[PIN_OUTPUT_SEL_COUNT] = {
- 0x00000000,
- 0x00000000,
- 0x00000000,
- 0x00000000,
- 0x00210222,
- 0x00002200,
- 0x00020000,
-};
-
-static void rgb_enable(struct dc_com_reg *com)
-{
- int i;
-
- for (i = 0; i < PIN_REG_COUNT; i++) {
- writel(rgb_enb_tab[i], &com->pin_output_enb[i]);
- writel(rgb_polarity_tab[i], &com->pin_output_polarity[i]);
- writel(rgb_data_tab[i], &com->pin_output_data[i]);
- }
-
- for (i = 0; i < PIN_OUTPUT_SEL_COUNT; i++)
- writel(rgb_sel_tab[i], &com->pin_output_sel[i]);
-}
-
-static int setup_window(struct disp_ctl_win *win,
- struct fdt_disp_config *config)
-{
- win->x = 0;
- win->y = 0;
- win->w = config->width;
- win->h = config->height;
- win->out_x = 0;
- win->out_y = 0;
- win->out_w = config->width;
- win->out_h = config->height;
- win->phys_addr = config->frame_buffer;
- win->stride = config->width * (1 << config->log2_bpp) / 8;
- debug("%s: depth = %d\n", __func__, config->log2_bpp);
- switch (config->log2_bpp) {
- case 5:
- case 24:
- win->fmt = COLOR_DEPTH_R8G8B8A8;
- win->bpp = 32;
- break;
- case 4:
- win->fmt = COLOR_DEPTH_B5G6R5;
- win->bpp = 16;
- break;
-
- default:
- debug("Unsupported LCD bit depth");
- return -1;
- }
-
- return 0;
-}
-
-struct fdt_disp_config *tegra_display_get_config(void)
-{
- return config.valid ? &config : NULL;
-}
-
-static void debug_timing(const char *name, unsigned int timing[])
-{
-#ifdef DEBUG
- int i;
-
- debug("%s timing: ", name);
- for (i = 0; i < FDT_LCD_TIMING_COUNT; i++)
- debug("%d ", timing[i]);
- debug("\n");
-#endif
-}
-
-/**
- * Decode panel information from the fdt, according to a standard binding
- *
- * @param blob fdt blob
- * @param node offset of fdt node to read from
- * @param config structure to store fdt config into
- * @return 0 if ok, -ve on error
- */
-static int tegra_decode_panel(const void *blob, int node,
- struct fdt_disp_config *config)
-{
- int front, back, ref;
-
- config->width = fdtdec_get_int(blob, node, "xres", -1);
- config->height = fdtdec_get_int(blob, node, "yres", -1);
- config->pixel_clock = fdtdec_get_int(blob, node, "clock", 0);
- if (!config->pixel_clock || config->width == -1 ||
- config->height == -1) {
- debug("%s: Pixel parameters missing\n", __func__);
- return -FDT_ERR_NOTFOUND;
- }
-
- back = fdtdec_get_int(blob, node, "left-margin", -1);
- front = fdtdec_get_int(blob, node, "right-margin", -1);
- ref = fdtdec_get_int(blob, node, "hsync-len", -1);
- if ((back | front | ref) == -1) {
- debug("%s: Horizontal parameters missing\n", __func__);
- return -FDT_ERR_NOTFOUND;
- }
-
- /* Use a ref-to-sync of 1 always, and take this from the front porch */
- config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
- config->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
- config->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
- config->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
- config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC];
- debug_timing("horiz", config->horiz_timing);
-
- back = fdtdec_get_int(blob, node, "upper-margin", -1);
- front = fdtdec_get_int(blob, node, "lower-margin", -1);
- ref = fdtdec_get_int(blob, node, "vsync-len", -1);
- if ((back | front | ref) == -1) {
- debug("%s: Vertical parameters missing\n", __func__);
- return -FDT_ERR_NOTFOUND;
- }
-
- config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
- config->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
- config->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
- config->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
- config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC];
- debug_timing("vert", config->vert_timing);
-
- return 0;
-}
-
-/**
- * Decode the display controller information from the fdt.
- *
- * @param blob fdt blob
- * @param config structure to store fdt config into
- * @return 0 if ok, -ve on error
- */
-static int tegra_display_decode_config(const void *blob,
- struct fdt_disp_config *config)
-{
- int node, rgb;
- int bpp, bit;
-
- /* TODO: Support multiple controllers */
- node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_DC);
- if (node < 0) {
- debug("%s: Cannot find display controller node in fdt\n",
- __func__);
- return node;
- }
- config->disp = (struct disp_ctlr *)fdtdec_get_addr(blob, node, "reg");
- if (!config->disp) {
- debug("%s: No display controller address\n", __func__);
- return -1;
- }
-
- rgb = fdt_subnode_offset(blob, node, "rgb");
-
- config->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel");
- if (config->panel_node < 0) {
- debug("%s: Cannot find panel information\n", __func__);
- return -1;
- }
-
- if (tegra_decode_panel(blob, config->panel_node, config)) {
- debug("%s: Failed to decode panel information\n", __func__);
- return -1;
- }
-
- bpp = fdtdec_get_int(blob, config->panel_node, "nvidia,bits-per-pixel",
- -1);
- bit = ffs(bpp) - 1;
- if (bpp == (1 << bit))
- config->log2_bpp = bit;
- else
- config->log2_bpp = bpp;
- if (bpp == -1) {
- debug("%s: Pixel bpp parameters missing\n", __func__);
- return -FDT_ERR_NOTFOUND;
- }
- config->bpp = bpp;
-
- config->valid = 1; /* we have a valid configuration */
-
- return 0;
-}
-
-int tegra_display_probe(const void *blob, void *default_lcd_base)
-{
- struct disp_ctl_win window;
- struct dc_ctlr *dc;
-
- if (tegra_display_decode_config(blob, &config))
- return -1;
-
- config.frame_buffer = (u32)default_lcd_base;
-
- dc = (struct dc_ctlr *)config.disp;
-
- /*
- * A header file for clock constants was NAKed upstream.
- * TODO: Put this into the FDT and fdt_lcd struct when we have clock
- * support there
- */
- clock_start_periph_pll(PERIPH_ID_HOST1X, CLOCK_ID_PERIPH,
- 144 * 1000000);
- clock_start_periph_pll(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL,
- 600 * 1000000);
- basic_init(&dc->cmd);
- basic_init_timer(&dc->disp);
- rgb_enable(&dc->com);
-
- if (config.pixel_clock)
- update_display_mode(&dc->disp, &config);
-
- if (setup_window(&window, &config))
- return -1;
-
- update_window(dc, &window);
-
- return 0;
-}
diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c
index 8e81346..62c4246 100644
--- a/drivers/video/tegra.c
+++ b/drivers/video/tegra.c
@@ -9,6 +9,7 @@
#include <asm/system.h>
#include <asm/gpio.h>
+#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
@@ -36,6 +37,7 @@ static unsigned long timer_next; /* Time we can move onto next stage */
/* Our LCD config, set up in handle_stage() */
static struct fdt_panel_config config;
struct fdt_disp_config *disp_config; /* Display controller config */
+static struct fdt_disp_config dconfig;
enum {
/* Maximum LCD size we support */
@@ -53,6 +55,400 @@ vidinfo_t panel_info = {
#error "You must enable CONFIG_OF_CONTROL to get Tegra LCD support"
#endif
+static void update_window(struct dc_ctlr *dc, struct disp_ctl_win *win)
+{
+ unsigned h_dda, v_dda;
+ unsigned long val;
+
+ val = readl(&dc->cmd.disp_win_header);
+ val |= WINDOW_A_SELECT;
+ writel(val, &dc->cmd.disp_win_header);
+
+ writel(win->fmt, &dc->win.color_depth);
+
+ clrsetbits_le32(&dc->win.byte_swap, BYTE_SWAP_MASK,
+ BYTE_SWAP_NOSWAP << BYTE_SWAP_SHIFT);
+
+ val = win->out_x << H_POSITION_SHIFT;
+ val |= win->out_y << V_POSITION_SHIFT;
+ writel(val, &dc->win.pos);
+
+ val = win->out_w << H_SIZE_SHIFT;
+ val |= win->out_h << V_SIZE_SHIFT;
+ writel(val, &dc->win.size);
+
+ val = (win->w * win->bpp / 8) << H_PRESCALED_SIZE_SHIFT;
+ val |= win->h << V_PRESCALED_SIZE_SHIFT;
+ writel(val, &dc->win.prescaled_size);
+
+ writel(0, &dc->win.h_initial_dda);
+ writel(0, &dc->win.v_initial_dda);
+
+ h_dda = (win->w * 0x1000) / max(win->out_w - 1, 1U);
+ v_dda = (win->h * 0x1000) / max(win->out_h - 1, 1U);
+
+ val = h_dda << H_DDA_INC_SHIFT;
+ val |= v_dda << V_DDA_INC_SHIFT;
+ writel(val, &dc->win.dda_increment);
+
+ writel(win->stride, &dc->win.line_stride);
+ writel(0, &dc->win.buf_stride);
+
+ val = WIN_ENABLE;
+ if (win->bpp < 24)
+ val |= COLOR_EXPAND;
+ writel(val, &dc->win.win_opt);
+
+ writel((unsigned long)win->phys_addr, &dc->winbuf.start_addr);
+ writel(win->x, &dc->winbuf.addr_h_offset);
+ writel(win->y, &dc->winbuf.addr_v_offset);
+
+ writel(0xff00, &dc->win.blend_nokey);
+ writel(0xff00, &dc->win.blend_1win);
+
+ val = GENERAL_ACT_REQ | WIN_A_ACT_REQ;
+ val |= GENERAL_UPDATE | WIN_A_UPDATE;
+ writel(val, &dc->cmd.state_ctrl);
+}
+
+static void write_pair(struct fdt_disp_config *config, int item, u32 *reg)
+{
+ writel(config->horiz_timing[item] |
+ (config->vert_timing[item] << 16), reg);
+}
+
+static int update_display_mode(struct dc_disp_reg *disp,
+ struct fdt_disp_config *config)
+{
+ unsigned long val;
+ unsigned long rate;
+ unsigned long div;
+
+ writel(0x0, &disp->disp_timing_opt);
+ write_pair(config, FDT_LCD_TIMING_REF_TO_SYNC, &disp->ref_to_sync);
+ write_pair(config, FDT_LCD_TIMING_SYNC_WIDTH, &disp->sync_width);
+ write_pair(config, FDT_LCD_TIMING_BACK_PORCH, &disp->back_porch);
+ write_pair(config, FDT_LCD_TIMING_FRONT_PORCH, &disp->front_porch);
+
+ writel(config->width | (config->height << 16), &disp->disp_active);
+
+ val = DE_SELECT_ACTIVE << DE_SELECT_SHIFT;
+ val |= DE_CONTROL_NORMAL << DE_CONTROL_SHIFT;
+ writel(val, &disp->data_enable_opt);
+
+ val = DATA_FORMAT_DF1P1C << DATA_FORMAT_SHIFT;
+ val |= DATA_ALIGNMENT_MSB << DATA_ALIGNMENT_SHIFT;
+ val |= DATA_ORDER_RED_BLUE << DATA_ORDER_SHIFT;
+ writel(val, &disp->disp_interface_ctrl);
+
+ /*
+ * The pixel clock divider is in 7.1 format (where the bottom bit
+ * represents 0.5). Here we calculate the divider needed to get from
+ * the display clock (typically 600MHz) to the pixel clock. We round
+ * up or down as requried.
+ */
+ rate = clock_get_periph_rate(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL);
+ div = ((rate * 2 + config->pixel_clock / 2) / config->pixel_clock) - 2;
+ debug("Display clock %lu, divider %lu\n", rate, div);
+
+ writel(0x00010001, &disp->shift_clk_opt);
+
+ val = PIXEL_CLK_DIVIDER_PCD1 << PIXEL_CLK_DIVIDER_SHIFT;
+ val |= div << SHIFT_CLK_DIVIDER_SHIFT;
+ writel(val, &disp->disp_clk_ctrl);
+
+ return 0;
+}
+
+/* Start up the display and turn on power to PWMs */
+static void basic_init(struct dc_cmd_reg *cmd)
+{
+ u32 val;
+
+ writel(0x00000100, &cmd->gen_incr_syncpt_ctrl);
+ writel(0x0000011a, &cmd->cont_syncpt_vsync);
+ writel(0x00000000, &cmd->int_type);
+ writel(0x00000000, &cmd->int_polarity);
+ writel(0x00000000, &cmd->int_mask);
+ writel(0x00000000, &cmd->int_enb);
+
+ val = PW0_ENABLE | PW1_ENABLE | PW2_ENABLE;
+ val |= PW3_ENABLE | PW4_ENABLE | PM0_ENABLE;
+ val |= PM1_ENABLE;
+ writel(val, &cmd->disp_pow_ctrl);
+
+ val = readl(&cmd->disp_cmd);
+ val |= CTRL_MODE_C_DISPLAY << CTRL_MODE_SHIFT;
+ writel(val, &cmd->disp_cmd);
+}
+
+static void basic_init_timer(struct dc_disp_reg *disp)
+{
+ writel(0x00000020, &disp->mem_high_pri);
+ writel(0x00000001, &disp->mem_high_pri_timer);
+}
+
+static const u32 rgb_enb_tab[PIN_REG_COUNT] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+static const u32 rgb_polarity_tab[PIN_REG_COUNT] = {
+ 0x00000000,
+ 0x01000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+static const u32 rgb_data_tab[PIN_REG_COUNT] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+};
+
+static const u32 rgb_sel_tab[PIN_OUTPUT_SEL_COUNT] = {
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00210222,
+ 0x00002200,
+ 0x00020000,
+};
+
+static void rgb_enable(struct dc_com_reg *com)
+{
+ int i;
+
+ for (i = 0; i < PIN_REG_COUNT; i++) {
+ writel(rgb_enb_tab[i], &com->pin_output_enb[i]);
+ writel(rgb_polarity_tab[i], &com->pin_output_polarity[i]);
+ writel(rgb_data_tab[i], &com->pin_output_data[i]);
+ }
+
+ for (i = 0; i < PIN_OUTPUT_SEL_COUNT; i++)
+ writel(rgb_sel_tab[i], &com->pin_output_sel[i]);
+}
+
+static int setup_window(struct disp_ctl_win *win,
+ struct fdt_disp_config *config)
+{
+ win->x = 0;
+ win->y = 0;
+ win->w = config->width;
+ win->h = config->height;
+ win->out_x = 0;
+ win->out_y = 0;
+ win->out_w = config->width;
+ win->out_h = config->height;
+ win->phys_addr = config->frame_buffer;
+ win->stride = config->width * (1 << config->log2_bpp) / 8;
+ debug("%s: depth = %d\n", __func__, config->log2_bpp);
+ switch (config->log2_bpp) {
+ case 5:
+ case 24:
+ win->fmt = COLOR_DEPTH_R8G8B8A8;
+ win->bpp = 32;
+ break;
+ case 4:
+ win->fmt = COLOR_DEPTH_B5G6R5;
+ win->bpp = 16;
+ break;
+
+ default:
+ debug("Unsupported LCD bit depth");
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * Return the current display configuration
+ *
+ * @return pointer to display configuration, or NULL if there is no valid
+ * config
+ */
+struct fdt_disp_config *tegra_display_get_config(void)
+{
+ return dconfig.valid ? &dconfig : NULL;
+}
+
+static void debug_timing(const char *name, unsigned int timing[])
+{
+#ifdef DEBUG
+ int i;
+
+ debug("%s timing: ", name);
+ for (i = 0; i < FDT_LCD_TIMING_COUNT; i++)
+ debug("%d ", timing[i]);
+ debug("\n");
+#endif
+}
+
+/**
+ * Decode panel information from the fdt, according to a standard binding
+ *
+ * @param blob fdt blob
+ * @param node offset of fdt node to read from
+ * @param config structure to store fdt config into
+ * @return 0 if ok, -ve on error
+ */
+static int tegra_decode_panel(const void *blob, int node,
+ struct fdt_disp_config *config)
+{
+ int front, back, ref;
+
+ config->width = fdtdec_get_int(blob, node, "xres", -1);
+ config->height = fdtdec_get_int(blob, node, "yres", -1);
+ config->pixel_clock = fdtdec_get_int(blob, node, "clock", 0);
+ if (!config->pixel_clock || config->width == -1 ||
+ config->height == -1) {
+ debug("%s: Pixel parameters missing\n", __func__);
+ return -FDT_ERR_NOTFOUND;
+ }
+
+ back = fdtdec_get_int(blob, node, "left-margin", -1);
+ front = fdtdec_get_int(blob, node, "right-margin", -1);
+ ref = fdtdec_get_int(blob, node, "hsync-len", -1);
+ if ((back | front | ref) == -1) {
+ debug("%s: Horizontal parameters missing\n", __func__);
+ return -FDT_ERR_NOTFOUND;
+ }
+
+ /* Use a ref-to-sync of 1 always, and take this from the front porch */
+ config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
+ config->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
+ config->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
+ config->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
+ config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC];
+ debug_timing("horiz", config->horiz_timing);
+
+ back = fdtdec_get_int(blob, node, "upper-margin", -1);
+ front = fdtdec_get_int(blob, node, "lower-margin", -1);
+ ref = fdtdec_get_int(blob, node, "vsync-len", -1);
+ if ((back | front | ref) == -1) {
+ debug("%s: Vertical parameters missing\n", __func__);
+ return -FDT_ERR_NOTFOUND;
+ }
+
+ config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
+ config->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
+ config->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
+ config->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
+ config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC];
+ debug_timing("vert", config->vert_timing);
+
+ return 0;
+}
+
+/**
+ * Decode the display controller information from the fdt.
+ *
+ * @param blob fdt blob
+ * @param config structure to store fdt config into
+ * @return 0 if ok, -ve on error
+ */
+static int tegra_display_decode_config(const void *blob,
+ struct fdt_disp_config *config)
+{
+ int node, rgb;
+ int bpp, bit;
+
+ /* TODO: Support multiple controllers */
+ node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_DC);
+ if (node < 0) {
+ debug("%s: Cannot find display controller node in fdt\n",
+ __func__);
+ return node;
+ }
+ config->disp = (struct disp_ctlr *)fdtdec_get_addr(blob, node, "reg");
+ if (!config->disp) {
+ debug("%s: No display controller address\n", __func__);
+ return -1;
+ }
+
+ rgb = fdt_subnode_offset(blob, node, "rgb");
+
+ config->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel");
+ if (config->panel_node < 0) {
+ debug("%s: Cannot find panel information\n", __func__);
+ return -1;
+ }
+
+ if (tegra_decode_panel(blob, config->panel_node, config)) {
+ debug("%s: Failed to decode panel information\n", __func__);
+ return -1;
+ }
+
+ bpp = fdtdec_get_int(blob, config->panel_node, "nvidia,bits-per-pixel",
+ -1);
+ bit = ffs(bpp) - 1;
+ if (bpp == (1 << bit))
+ config->log2_bpp = bit;
+ else
+ config->log2_bpp = bpp;
+ if (bpp == -1) {
+ debug("%s: Pixel bpp parameters missing\n", __func__);
+ return -FDT_ERR_NOTFOUND;
+ }
+ config->bpp = bpp;
+
+ config->valid = 1; /* we have a valid configuration */
+
+ return 0;
+}
+
+/**
+ * Register a new display based on device tree configuration.
+ *
+ * The frame buffer can be positioned by U-Boot or overriden by the fdt.
+ * You should pass in the U-Boot address here, and check the contents of
+ * struct fdt_disp_config to see what was actually chosen.
+ *
+ * @param blob Device tree blob
+ * @param default_lcd_base Default address of LCD frame buffer
+ * @return 0 if ok, -1 on error (unsupported bits per pixel)
+ */
+static int tegra_display_probe(const void *blob, void *default_lcd_base)
+{
+ struct disp_ctl_win window;
+ struct dc_ctlr *dc;
+
+ if (tegra_display_decode_config(blob, &dconfig))
+ return -1;
+
+ dconfig.frame_buffer = (u32)default_lcd_base;
+
+ dc = (struct dc_ctlr *)dconfig.disp;
+
+ /*
+ * A header file for clock constants was NAKed upstream.
+ * TODO: Put this into the FDT and fdt_lcd struct when we have clock
+ * support there
+ */
+ clock_start_periph_pll(PERIPH_ID_HOST1X, CLOCK_ID_PERIPH,
+ 144 * 1000000);
+ clock_start_periph_pll(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL,
+ 600 * 1000000);
+ basic_init(&dc->cmd);
+ basic_init_timer(&dc->disp);
+ rgb_enable(&dc->com);
+
+ if (dconfig.pixel_clock)
+ update_display_mode(&dc->disp, &dconfig);
+
+ if (setup_window(&window, &dconfig))
+ return -1;
+
+ update_window(dc, &window);
+
+ return 0;
+}
+
static void update_panel_size(struct fdt_disp_config *config)
{
panel_info.vl_col = config->width;
--
2.6.0.rc2.230.g3dd15c0
More information about the U-Boot
mailing list