[U-Boot] [PATCH 17/23] tegra: video: Convert tegra20 LCD driver to driver model
Simon Glass
sjg at chromium.org
Thu Jan 14 19:28:29 CET 2016
Move this driver over to use driver model. This involves rearranging the
code somewhat. The effect is that everything is run from the probe() method.
Boards which use this are fixed up, but only seaboard is tested.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
arch/arm/dts/tegra20-seaboard.dts | 4 +
arch/arm/dts/tegra20.dtsi | 2 +
arch/arm/include/asm/arch-tegra20/display.h | 26 --
board/compal/paz00/paz00.c | 2 +-
configs/colibri_t20_defconfig | 4 +
configs/harmony_defconfig | 6 +-
configs/medcom-wide_defconfig | 4 +
configs/paz00_defconfig | 4 +
configs/seaboard_defconfig | 4 +
configs/tec_defconfig | 4 +
configs/ventana_defconfig | 4 +
drivers/video/tegra.c | 387 +++++++++++++---------------
include/configs/colibri_t20.h | 2 -
include/configs/harmony.h | 2 -
include/configs/medcom-wide.h | 2 -
include/configs/paz00.h | 2 -
include/configs/seaboard.h | 2 -
include/configs/tec.h | 2 -
include/configs/ventana.h | 2 -
19 files changed, 210 insertions(+), 255 deletions(-)
diff --git a/arch/arm/dts/tegra20-seaboard.dts b/arch/arm/dts/tegra20-seaboard.dts
index 02ea64d..15bd121 100644
--- a/arch/arm/dts/tegra20-seaboard.dts
+++ b/arch/arm/dts/tegra20-seaboard.dts
@@ -40,6 +40,10 @@
nvidia,panel = <&lcd_panel>;
};
};
+
+ dc at 54240000 {
+ status = "disabled";
+ };
};
/* This is not used in U-Boot, but is expected to be in kernel .dts */
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index 5b14be4..31223e4 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -10,6 +10,7 @@
interrupt-parent = <&lic>;
host1x at 50000000 {
+ u-boot,dm-pre-reloc;
compatible = "nvidia,tegra20-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
@@ -77,6 +78,7 @@
};
dc at 54200000 {
+ u-boot,dm-pre-reloc;
compatible = "nvidia,tegra20-dc";
reg = <0x54200000 0x00040000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/include/asm/arch-tegra20/display.h b/arch/arm/include/asm/arch-tegra20/display.h
index 3f5f9b1..1f505b8 100644
--- a/arch/arm/include/asm/arch-tegra20/display.h
+++ b/arch/arm/include/asm/arch-tegra20/display.h
@@ -48,30 +48,4 @@ enum lcd_cache_t {
FDT_LCD_CACHE_FLUSH,
};
-/**
- * Perform the next stage of the LCD init if it is time to do so.
- *
- * LCD init can be time-consuming because of the number of delays we need
- * while waiting for the backlight power supply, etc. This function can
- * be called at various times during U-Boot operation to advance the
- * initialization of the LCD to the next stage if sufficient time has
- * passed since the last stage. It keeps track of what stage it is up to
- * and the time that it is permitted to move to the next stage.
- *
- * The final call should have wait=1 to complete the init.
- *
- * @param blob fdt blob containing LCD information
- * @param wait 1 to wait until all init is complete, and then return
- * 0 to return immediately, potentially doing nothing if it is
- * not yet time for the next init.
- */
-int tegra_lcd_check_next_stage(const void *blob, int wait);
-
-/**
- * Set up the maximum LCD size so we can size the frame buffer.
- *
- * @param blob fdt blob containing LCD information
- */
-void tegra_lcd_early_init(const void *blob);
-
#endif /*__ASM_ARCH_TEGRA_DISPLAY_H*/
diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c
index 462ab05..5c4fb68 100644
--- a/board/compal/paz00/paz00.c
+++ b/board/compal/paz00/paz00.c
@@ -48,7 +48,7 @@ void pin_mux_mmc(void)
}
#endif
-#ifdef CONFIG_LCD
+#ifdef CONFIG_DM_VIDEO
/* this is a weak define that we are overriding */
void pin_mux_display(void)
{
diff --git a/configs/colibri_t20_defconfig b/configs/colibri_t20_defconfig
index 9b198e0..84e5bc5 100644
--- a/configs/colibri_t20_defconfig
+++ b/configs/colibri_t20_defconfig
@@ -11,8 +11,12 @@ CONFIG_SYS_PROMPT="Colibri T20 # "
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_NFS is not set
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_PWM=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DM_VIDEO=y
CONFIG_VIDEO_TEGRA20=y
CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/configs/harmony_defconfig b/configs/harmony_defconfig
index d1abd4b..8a41118 100644
--- a/configs/harmony_defconfig
+++ b/configs/harmony_defconfig
@@ -12,8 +12,12 @@ CONFIG_SYS_PROMPT="Tegra20 (Harmony) # "
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_PWM=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_DM_USB=y
-CONFIG_USE_PRIVATE_LIBGCC=y
+CONFIG_DM_VIDEO=y
CONFIG_VIDEO_TEGRA20=y
+CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig
index 579a338..7aff258 100644
--- a/configs/medcom-wide_defconfig
+++ b/configs/medcom-wide_defconfig
@@ -12,8 +12,12 @@ CONFIG_SYS_PROMPT="Tegra20 (Medcom-Wide) # "
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_PWM=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DM_VIDEO=y
CONFIG_VIDEO_TEGRA20=y
CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/configs/paz00_defconfig b/configs/paz00_defconfig
index 37118f8..ea9fe44 100644
--- a/configs/paz00_defconfig
+++ b/configs/paz00_defconfig
@@ -12,8 +12,12 @@ CONFIG_SYS_PROMPT="Tegra20 (Paz00) MOD # "
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_PWM=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DM_VIDEO=y
CONFIG_VIDEO_TEGRA20=y
CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig
index 3ced3cc..528707f 100644
--- a/configs/seaboard_defconfig
+++ b/configs/seaboard_defconfig
@@ -12,8 +12,12 @@ CONFIG_SYS_PROMPT="Tegra20 (SeaBoard) # "
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_PWM=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DM_VIDEO=y
CONFIG_VIDEO_TEGRA20=y
CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/configs/tec_defconfig b/configs/tec_defconfig
index 3b14300..9ba3062 100644
--- a/configs/tec_defconfig
+++ b/configs/tec_defconfig
@@ -12,8 +12,12 @@ CONFIG_SYS_PROMPT="Tegra20 (TEC) # "
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_PWM=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DM_VIDEO=y
CONFIG_VIDEO_TEGRA20=y
CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig
index d83e0d3..08abea2 100644
--- a/configs/ventana_defconfig
+++ b/configs/ventana_defconfig
@@ -12,8 +12,12 @@ CONFIG_SYS_PROMPT="Tegra20 (Ventana) # "
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_PWM=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DM_VIDEO=y
CONFIG_VIDEO_TEGRA20=y
CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c
index f96f865..d3744a2 100644
--- a/drivers/video/tegra.c
+++ b/drivers/video/tegra.c
@@ -2,11 +2,11 @@
* Copyright (c) 2011 The Chromium OS Authors.
* SPDX-License-Identifier: GPL-2.0+
*/
-
+#define DEBUG
#include <common.h>
+#include <dm.h>
#include <fdtdec.h>
-#include <lcd.h>
-
+#include <video.h>
#include <asm/system.h>
#include <asm/gpio.h>
#include <asm/io.h>
@@ -36,7 +36,6 @@ static unsigned long timer_next; /* Time we can move onto next stage */
/* Information about the display controller */
struct tegra_lcd_priv {
- int valid; /* config is valid */
int width; /* width in pixels */
int height; /* height in pixels */
int bpp; /* number of bits per pixel */
@@ -69,20 +68,11 @@ struct tegra_lcd_priv {
uint panel_timings[FDT_LCD_TIMINGS];
};
-/* Our LCD config, set up in handle_stage() */
-static struct tegra_lcd_priv config;
-struct tegra_lcd_priv *disp_config; /* Display controller config */
-
enum {
/* Maximum LCD size we support */
LCD_MAX_WIDTH = 1366,
LCD_MAX_HEIGHT = 768,
- LCD_MAX_LOG2_BPP = 4, /* 2^4 = 16 bpp */
-};
-
-vidinfo_t panel_info = {
- /* Insert a value here so that we don't end up in the BSS */
- .vl_col = -1,
+ LCD_MAX_LOG2_BPP = VIDEO_BPP16,
};
static void update_window(struct dc_ctlr *dc, struct disp_ctl_win *win)
@@ -141,26 +131,26 @@ static void update_window(struct dc_ctlr *dc, struct disp_ctl_win *win)
writel(val, &dc->cmd.state_ctrl);
}
-static void write_pair(struct tegra_lcd_priv *config, int item, u32 *reg)
+static void write_pair(struct tegra_lcd_priv *priv, int item, u32 *reg)
{
- writel(config->horiz_timing[item] |
- (config->vert_timing[item] << 16), reg);
+ writel(priv->horiz_timing[item] |
+ (priv->vert_timing[item] << 16), reg);
}
static int update_display_mode(struct dc_disp_reg *disp,
- struct tegra_lcd_priv *config)
+ struct tegra_lcd_priv *priv)
{
unsigned long val;
unsigned long rate;
unsigned long div;
writel(0x0, &disp->disp_timing_opt);
- write_pair(config, FDT_LCD_TIMING_REF_TO_SYNC, &disp->ref_to_sync);
- write_pair(config, FDT_LCD_TIMING_SYNC_WIDTH, &disp->sync_width);
- write_pair(config, FDT_LCD_TIMING_BACK_PORCH, &disp->back_porch);
- write_pair(config, FDT_LCD_TIMING_FRONT_PORCH, &disp->front_porch);
+ write_pair(priv, FDT_LCD_TIMING_REF_TO_SYNC, &disp->ref_to_sync);
+ write_pair(priv, FDT_LCD_TIMING_SYNC_WIDTH, &disp->sync_width);
+ write_pair(priv, FDT_LCD_TIMING_BACK_PORCH, &disp->back_porch);
+ write_pair(priv, FDT_LCD_TIMING_FRONT_PORCH, &disp->front_porch);
- writel(config->width | (config->height << 16), &disp->disp_active);
+ writel(priv->width | (priv->height << 16), &disp->disp_active);
val = DE_SELECT_ACTIVE << DE_SELECT_SHIFT;
val |= DE_CONTROL_NORMAL << DE_CONTROL_SHIFT;
@@ -178,7 +168,7 @@ static int update_display_mode(struct dc_disp_reg *disp,
* up or down as requried.
*/
rate = clock_get_periph_rate(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL);
- div = ((rate * 2 + config->pixel_clock / 2) / config->pixel_clock) - 2;
+ div = ((rate * 2 + priv->pixel_clock / 2) / priv->pixel_clock) - 2;
debug("Display clock %lu, divider %lu\n", rate, div);
writel(0x00010001, &disp->shift_clk_opt);
@@ -264,20 +254,20 @@ static void rgb_enable(struct dc_com_reg *com)
}
static int setup_window(struct disp_ctl_win *win,
- struct tegra_lcd_priv *config)
+ struct tegra_lcd_priv *priv)
{
win->x = 0;
win->y = 0;
- win->w = config->width;
- win->h = config->height;
+ win->w = priv->width;
+ win->h = priv->height;
win->out_x = 0;
win->out_y = 0;
- win->out_w = config->width;
- win->out_h = config->height;
- win->phys_addr = config->frame_buffer;
- win->stride = config->width * (1 << config->log2_bpp) / 8;
- debug("%s: depth = %d\n", __func__, config->log2_bpp);
- switch (config->log2_bpp) {
+ win->out_w = priv->width;
+ win->out_h = priv->height;
+ win->phys_addr = priv->frame_buffer;
+ win->stride = priv->width * (1 << priv->log2_bpp) / 8;
+ debug("%s: depth = %d\n", __func__, priv->log2_bpp);
+ switch (priv->log2_bpp) {
case 5:
case 24:
win->fmt = COLOR_DEPTH_R8G8B8A8;
@@ -296,17 +286,6 @@ static int setup_window(struct disp_ctl_win *win,
return 0;
}
-/**
- * Return the current display configuration
- *
- * @return pointer to display configuration, or NULL if there is no valid
- * config
- */
-struct tegra_lcd_priv *tegra_display_get_config(void)
-{
- return config.valid ? &config : NULL;
-}
-
static void debug_timing(const char *name, unsigned int timing[])
{
#ifdef DEBUG
@@ -324,19 +303,19 @@ static void debug_timing(const char *name, unsigned int timing[])
*
* @param blob fdt blob
* @param node offset of fdt node to read from
- * @param config structure to store fdt config into
+ * @param priv structure to store fdt config into
* @return 0 if ok, -ve on error
*/
static int tegra_decode_panel(const void *blob, int node,
- struct tegra_lcd_priv *config)
+ struct tegra_lcd_priv *priv)
{
int front, back, ref;
- config->width = fdtdec_get_int(blob, node, "xres", -1);
- config->height = fdtdec_get_int(blob, node, "yres", -1);
- config->pixel_clock = fdtdec_get_int(blob, node, "clock", 0);
- if (!config->pixel_clock || config->width == -1 ||
- config->height == -1) {
+ priv->width = fdtdec_get_int(blob, node, "xres", -1);
+ priv->height = fdtdec_get_int(blob, node, "yres", -1);
+ priv->pixel_clock = fdtdec_get_int(blob, node, "clock", 0);
+ if (!priv->pixel_clock || priv->width == -1 ||
+ priv->height == -1) {
debug("%s: Pixel parameters missing\n", __func__);
return -FDT_ERR_NOTFOUND;
}
@@ -350,12 +329,12 @@ static int tegra_decode_panel(const void *blob, int node,
}
/* Use a ref-to-sync of 1 always, and take this from the front porch */
- config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
- config->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
- config->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
- config->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
- config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC];
- debug_timing("horiz", config->horiz_timing);
+ priv->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
+ priv->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
+ priv->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
+ priv->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
+ priv->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC];
+ debug_timing("horiz", priv->horiz_timing);
back = fdtdec_get_int(blob, node, "upper-margin", -1);
front = fdtdec_get_int(blob, node, "lower-margin", -1);
@@ -365,12 +344,12 @@ static int tegra_decode_panel(const void *blob, int node,
return -FDT_ERR_NOTFOUND;
}
- config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
- config->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
- config->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
- config->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
- config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC];
- debug_timing("vert", config->vert_timing);
+ priv->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
+ priv->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
+ priv->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
+ priv->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
+ priv->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC];
+ debug_timing("vert", priv->vert_timing);
return 0;
}
@@ -379,55 +358,46 @@ static int tegra_decode_panel(const void *blob, int node,
* Decode the display controller information from the fdt.
*
* @param blob fdt blob
- * @param config structure to store fdt config into
+ * @param priv structure to store fdt priv into
* @return 0 if ok, -ve on error
*/
-static int tegra_display_decode_config(const void *blob,
- struct tegra_lcd_priv *config)
+static int tegra_display_decode_config(const void *blob, int node,
+ struct tegra_lcd_priv *priv)
{
- int node, rgb;
+ int rgb;
int bpp, bit;
- /* TODO: Support multiple controllers */
- node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_DC);
- if (node < 0) {
- debug("%s: Cannot find display controller node in fdt\n",
- __func__);
- return node;
- }
- config->disp = (struct disp_ctlr *)fdtdec_get_addr(blob, node, "reg");
- if (!config->disp) {
+ priv->disp = (struct disp_ctlr *)fdtdec_get_addr(blob, node, "reg");
+ if (!priv->disp) {
debug("%s: No display controller address\n", __func__);
return -1;
}
rgb = fdt_subnode_offset(blob, node, "rgb");
- config->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel");
- if (config->panel_node < 0) {
+ priv->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel");
+ if (priv->panel_node < 0) {
debug("%s: Cannot find panel information\n", __func__);
return -1;
}
- if (tegra_decode_panel(blob, config->panel_node, config)) {
+ if (tegra_decode_panel(blob, priv->panel_node, priv)) {
debug("%s: Failed to decode panel information\n", __func__);
return -1;
}
- bpp = fdtdec_get_int(blob, config->panel_node, "nvidia,bits-per-pixel",
+ bpp = fdtdec_get_int(blob, priv->panel_node, "nvidia,bits-per-pixel",
-1);
bit = ffs(bpp) - 1;
if (bpp == (1 << bit))
- config->log2_bpp = bit;
+ priv->log2_bpp = bit;
else
- config->log2_bpp = bpp;
+ priv->log2_bpp = bpp;
if (bpp == -1) {
debug("%s: Pixel bpp parameters missing\n", __func__);
return -FDT_ERR_NOTFOUND;
}
- config->bpp = bpp;
-
- config->valid = 1; /* we have a valid configuration */
+ priv->bpp = bpp;
return 0;
}
@@ -440,20 +410,19 @@ static int tegra_display_decode_config(const void *blob,
* struct tegra_lcd_priv to see what was actually chosen.
*
* @param blob Device tree blob
+ * @param priv Driver's private data
* @param default_lcd_base Default address of LCD frame buffer
* @return 0 if ok, -1 on error (unsupported bits per pixel)
*/
-static int tegra_display_probe(const void *blob, void *default_lcd_base)
+static int tegra_display_probe(const void *blob, struct tegra_lcd_priv *priv,
+ void *default_lcd_base)
{
struct disp_ctl_win window;
struct dc_ctlr *dc;
- if (tegra_display_decode_config(blob, &config))
- return -1;
-
- config.frame_buffer = (u32)default_lcd_base;
+ priv->frame_buffer = (u32)default_lcd_base;
- dc = (struct dc_ctlr *)config.disp;
+ dc = (struct dc_ctlr *)priv->disp;
/*
* A header file for clock constants was NAKed upstream.
@@ -468,10 +437,10 @@ static int tegra_display_probe(const void *blob, void *default_lcd_base)
basic_init_timer(&dc->disp);
rgb_enable(&dc->com);
- if (config.pixel_clock)
- update_display_mode(&dc->disp, &config);
+ if (priv->pixel_clock)
+ update_display_mode(&dc->disp, priv);
- if (setup_window(&window, &config))
+ if (setup_window(&window, priv))
return -1;
update_window(dc, &window);
@@ -479,142 +448,61 @@ static int tegra_display_probe(const void *blob, void *default_lcd_base)
return 0;
}
-static void update_panel_size(struct tegra_lcd_priv *config)
-{
- panel_info.vl_col = config->width;
- panel_info.vl_row = config->height;
- panel_info.vl_bpix = config->log2_bpp;
-}
-
-/*
- * Main init function called by lcd driver.
- * Inits and then prints test pattern if required.
- */
-
-void lcd_ctrl_init(void *lcdbase)
-{
- int type = DCACHE_OFF;
- int size;
-
- assert(disp_config);
-
- /* Make sure that we can acommodate the selected LCD */
- assert(disp_config->width <= LCD_MAX_WIDTH);
- assert(disp_config->height <= LCD_MAX_HEIGHT);
- assert(disp_config->log2_bpp <= LCD_MAX_LOG2_BPP);
- if (disp_config->width <= LCD_MAX_WIDTH
- && disp_config->height <= LCD_MAX_HEIGHT
- && disp_config->log2_bpp <= LCD_MAX_LOG2_BPP)
- update_panel_size(disp_config);
- size = lcd_get_size(&lcd_line_length);
-
- /* Set up the LCD caching as requested */
- if (config.cache_type & FDT_LCD_CACHE_WRITE_THROUGH)
- type = DCACHE_WRITETHROUGH;
- else if (config.cache_type & FDT_LCD_CACHE_WRITE_BACK)
- type = DCACHE_WRITEBACK;
- mmu_set_region_dcache_behaviour(disp_config->frame_buffer, size, type);
-
- /* Enable flushing after LCD writes if requested */
- lcd_set_flush_dcache(config.cache_type & FDT_LCD_CACHE_FLUSH);
-
- debug("LCD frame buffer at %pa\n", &disp_config->frame_buffer);
-}
-
-ulong calc_fbsize(void)
-{
- return (panel_info.vl_col * panel_info.vl_row *
- NBITS(panel_info.vl_bpix)) / 8;
-}
-
-void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
-{
-}
-
-void tegra_lcd_early_init(const void *blob)
-{
- /*
- * Go with the maximum size for now. We will fix this up after
- * relocation. These values are only used for memory alocation.
- */
- panel_info.vl_col = LCD_MAX_WIDTH;
- panel_info.vl_row = LCD_MAX_HEIGHT;
- panel_info.vl_bpix = LCD_MAX_LOG2_BPP;
-}
-
/**
* Decode the panel information from the fdt.
*
* @param blob fdt blob
- * @param config structure to store fdt config into
+ * @param priv structure to store fdt config into
* @return 0 if ok, -ve on error
*/
-static int fdt_decode_lcd(const void *blob, struct tegra_lcd_priv *config)
+static int fdt_decode_lcd(const void *blob, struct tegra_lcd_priv *priv)
{
int display_node;
- disp_config = tegra_display_get_config();
- if (!disp_config) {
- debug("%s: Display controller is not configured\n", __func__);
- return -1;
- }
- display_node = disp_config->panel_node;
+ display_node = priv->panel_node;
if (display_node < 0) {
debug("%s: No panel configuration available\n", __func__);
return -1;
}
- config->pwm_channel = pwm_request(blob, display_node, "nvidia,pwm");
- if (config->pwm_channel < 0) {
+ priv->pwm_channel = pwm_request(blob, display_node, "nvidia,pwm");
+ if (priv->pwm_channel < 0) {
debug("%s: Unable to request PWM channel\n", __func__);
return -1;
}
- config->cache_type = fdtdec_get_int(blob, display_node,
+ priv->cache_type = fdtdec_get_int(blob, display_node,
"nvidia,cache-type",
FDT_LCD_CACHE_WRITE_BACK_FLUSH);
/* These GPIOs are all optional */
gpio_request_by_name_nodev(blob, display_node,
"nvidia,backlight-enable-gpios", 0,
- &config->backlight_en, GPIOD_IS_OUT);
+ &priv->backlight_en, GPIOD_IS_OUT);
gpio_request_by_name_nodev(blob, display_node,
"nvidia,lvds-shutdown-gpios", 0,
- &config->lvds_shutdown, GPIOD_IS_OUT);
+ &priv->lvds_shutdown, GPIOD_IS_OUT);
gpio_request_by_name_nodev(blob, display_node,
"nvidia,backlight-vdd-gpios", 0,
- &config->backlight_vdd, GPIOD_IS_OUT);
+ &priv->backlight_vdd, GPIOD_IS_OUT);
gpio_request_by_name_nodev(blob, display_node,
"nvidia,panel-vdd-gpios", 0,
- &config->panel_vdd, GPIOD_IS_OUT);
+ &priv->panel_vdd, GPIOD_IS_OUT);
return fdtdec_get_int_array(blob, display_node, "nvidia,panel-timings",
- config->panel_timings, FDT_LCD_TIMINGS);
+ priv->panel_timings, FDT_LCD_TIMINGS);
}
/**
* Handle the next stage of device init
*/
-static int handle_stage(const void *blob)
+static int handle_stage(const void *blob, struct tegra_lcd_priv *priv)
{
debug("%s: stage %d\n", __func__, stage);
/* do the things for this stage */
switch (stage) {
case STAGE_START:
- /* Initialize the Tegra display controller */
- if (tegra_display_probe(gd->fdt_blob, (void *)gd->fb_base)) {
- printf("%s: Failed to probe display driver\n",
- __func__);
- return -1;
- }
-
- /* get panel details */
- if (fdt_decode_lcd(blob, &config)) {
- printf("No valid LCD information in device tree\n");
- return -1;
- }
-
/*
* It is possible that the FDT has requested that the LCD be
* disabled. We currently don't support this. It would require
@@ -628,27 +516,27 @@ static int handle_stage(const void *blob)
funcmux_select(PERIPH_ID_DISP1, FUNCMUX_DEFAULT);
break;
case STAGE_PANEL_VDD:
- if (dm_gpio_is_valid(&config.panel_vdd))
- dm_gpio_set_value(&config.panel_vdd, 1);
+ if (dm_gpio_is_valid(&priv->panel_vdd))
+ dm_gpio_set_value(&priv->panel_vdd, 1);
break;
case STAGE_LVDS:
- if (dm_gpio_is_valid(&config.lvds_shutdown))
- dm_gpio_set_value(&config.lvds_shutdown, 1);
+ if (dm_gpio_is_valid(&priv->lvds_shutdown))
+ dm_gpio_set_value(&priv->lvds_shutdown, 1);
break;
case STAGE_BACKLIGHT_VDD:
- if (dm_gpio_is_valid(&config.backlight_vdd))
- dm_gpio_set_value(&config.backlight_vdd, 1);
+ if (dm_gpio_is_valid(&priv->backlight_vdd))
+ dm_gpio_set_value(&priv->backlight_vdd, 1);
break;
case STAGE_PWM:
/* Enable PWM at 15/16 high, 32768 Hz with divider 1 */
pinmux_set_func(PMUX_PINGRP_GPU, PMUX_FUNC_PWM);
pinmux_tristate_disable(PMUX_PINGRP_GPU);
- pwm_enable(config.pwm_channel, 32768, 0xdf, 1);
+ pwm_enable(priv->pwm_channel, 32768, 0xdf, 1);
break;
case STAGE_BACKLIGHT_EN:
- if (dm_gpio_is_valid(&config.backlight_en))
- dm_gpio_set_value(&config.backlight_en, 1);
+ if (dm_gpio_is_valid(&priv->backlight_en))
+ dm_gpio_set_value(&priv->backlight_en, 1);
break;
case STAGE_DONE:
break;
@@ -657,14 +545,32 @@ static int handle_stage(const void *blob)
/* set up timer for next stage */
timer_next = timer_get_us();
if (stage < FDT_LCD_TIMINGS)
- timer_next += config.panel_timings[stage] * 1000;
+ timer_next += priv->panel_timings[stage] * 1000;
/* move to next stage */
stage++;
return 0;
}
-int tegra_lcd_check_next_stage(const void *blob, int wait)
+/**
+ * Perform the next stage of the LCD init if it is time to do so.
+ *
+ * LCD init can be time-consuming because of the number of delays we need
+ * while waiting for the backlight power supply, etc. This function can
+ * be called at various times during U-Boot operation to advance the
+ * initialization of the LCD to the next stage if sufficient time has
+ * passed since the last stage. It keeps track of what stage it is up to
+ * and the time that it is permitted to move to the next stage.
+ *
+ * The final call should have wait=1 to complete the init.
+ *
+ * @param blob fdt blob containing LCD information
+ * @param wait 1 to wait until all init is complete, and then return
+ * 0 to return immediately, potentially doing nothing if it is
+ * not yet time for the next init.
+ */
+static int tegra_lcd_check_next_stage(const void *blob,
+ struct tegra_lcd_priv *priv, int wait)
{
if (stage == STAGE_DONE)
return 0;
@@ -683,7 +589,7 @@ int tegra_lcd_check_next_stage(const void *blob, int wait)
}
}
- if (handle_stage(blob))
+ if (handle_stage(blob, priv))
return -1;
} while (wait && stage != STAGE_DONE);
if (stage == STAGE_DONE)
@@ -692,20 +598,75 @@ int tegra_lcd_check_next_stage(const void *blob, int wait)
return 0;
}
-void lcd_enable(void)
+static int tegra_lcd_probe(struct udevice *dev)
{
- /*
- * Backlight and power init will be done separately in
- * tegra_lcd_check_next_stage(), which should be called in
- * board_late_init().
- *
- * U-Boot code supports only colour depth, selected at compile time.
- * The device tree setting should match this. Otherwise the display
- * will not look right, and U-Boot may crash.
- */
- if (disp_config->log2_bpp != LCD_BPP) {
- printf("%s: Error: LCD depth configured in FDT (%d = %dbpp)"
- " must match setting of LCD_BPP (%d)\n", __func__,
- disp_config->log2_bpp, disp_config->bpp, LCD_BPP);
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+ struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct tegra_lcd_priv *priv = dev_get_priv(dev);
+ const void *blob = gd->fdt_blob;
+ int type = DCACHE_OFF;
+
+ if (tegra_display_decode_config(blob, dev->of_offset, priv))
+ return -1;
+
+ /* get panel details */
+ if (fdt_decode_lcd(blob, priv)) {
+ printf("No valid LCD information in device tree\n");
+ return -1;
+ }
+
+ /* Initialize the Tegra display controller */
+ if (tegra_display_probe(blob, priv, (void *)plat->base)) {
+ printf("%s: Failed to probe display driver\n",
+ __func__);
+ return -1;
}
+
+ tegra_lcd_check_next_stage(blob, priv, 1);
+
+ /* Set up the LCD caching as requested */
+ if (priv->cache_type & FDT_LCD_CACHE_WRITE_THROUGH)
+ type = DCACHE_WRITETHROUGH;
+ else if (priv->cache_type & FDT_LCD_CACHE_WRITE_BACK)
+ type = DCACHE_WRITEBACK;
+ mmu_set_region_dcache_behaviour(priv->frame_buffer, plat->size, type);
+
+ /* Enable flushing after LCD writes if requested */
+ video_set_flush_dcache(dev, priv->cache_type & FDT_LCD_CACHE_FLUSH);
+
+ uc_priv->xsize = priv->width;
+ uc_priv->ysize = priv->height;
+ uc_priv->bpix = priv->log2_bpp;
+ debug("LCD frame buffer at %pa, size %x\n", &priv->frame_buffer,
+ plat->size);
+
+ return 0;
+}
+
+static int tegra_lcd_bind(struct udevice *dev)
+{
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+
+ plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT *
+ (1 << LCD_MAX_LOG2_BPP) / 8;
+
+ return 0;
}
+
+static const struct video_ops tegra_lcd_ops = {
+};
+
+static const struct udevice_id tegra_lcd_ids[] = {
+ { .compatible = "nvidia,tegra20-dc" },
+ { }
+};
+
+U_BOOT_DRIVER(tegra_lcd) = {
+ .name = "tegra_lcd",
+ .id = UCLASS_VIDEO,
+ .of_match = tegra_lcd_ids,
+ .ops = &tegra_lcd_ops,
+ .bind = tegra_lcd_bind,
+ .probe = tegra_lcd_probe,
+ .priv_auto_alloc_size = sizeof(struct tegra_lcd_priv),
+};
diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h
index e1aab72..61d04b7 100644
--- a/include/configs/colibri_t20.h
+++ b/include/configs/colibri_t20.h
@@ -53,9 +53,7 @@
#define CONFIG_TFTP_TSIZE
/* LCD support */
-#define CONFIG_LCD
#define CONFIG_PWM_TEGRA
-#define LCD_BPP LCD_COLOR16
#define CONFIG_SYS_WHITE_ON_BLACK
#define CONFIG_CONSOLE_SCROLL_LINES 10
#define CONFIG_CMD_BMP
diff --git a/include/configs/harmony.h b/include/configs/harmony.h
index 89dae8f..a78f7c4 100644
--- a/include/configs/harmony.h
+++ b/include/configs/harmony.h
@@ -60,9 +60,7 @@
#define CONFIG_CMD_DHCP
/* LCD support */
-#define CONFIG_LCD
#define CONFIG_PWM_TEGRA
-#define LCD_BPP LCD_COLOR16
#define CONFIG_SYS_WHITE_ON_BLACK
#define CONFIG_CONSOLE_SCROLL_LINES 10
diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h
index 819cc18..c3e9128 100644
--- a/include/configs/medcom-wide.h
+++ b/include/configs/medcom-wide.h
@@ -48,9 +48,7 @@
#define CONFIG_CMD_DHCP
/* LCD support */
-#define CONFIG_LCD
#define CONFIG_PWM_TEGRA
-#define LCD_BPP LCD_COLOR16
#define CONFIG_SYS_WHITE_ON_BLACK
/* support the new (FDT-based) image format */
diff --git a/include/configs/paz00.h b/include/configs/paz00.h
index 8c12312..ae058e0 100644
--- a/include/configs/paz00.h
+++ b/include/configs/paz00.h
@@ -55,9 +55,7 @@
#define CONFIG_CMD_DHCP
/* LCD support */
-#define CONFIG_LCD
#define CONFIG_PWM_TEGRA
-#define LCD_BPP LCD_COLOR16
#define CONFIG_SYS_WHITE_ON_BLACK
#define CONFIG_CONSOLE_SCROLL_LINES 10
diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
index 87bf1b1..01650e4 100644
--- a/include/configs/seaboard.h
+++ b/include/configs/seaboard.h
@@ -66,9 +66,7 @@
#define CONFIG_USB_KEYBOARD
/* LCD support */
-#define CONFIG_LCD
#define CONFIG_PWM_TEGRA
-#define LCD_BPP LCD_COLOR16
#define CONFIG_SYS_WHITE_ON_BLACK
#define CONFIG_CONSOLE_SCROLL_LINES 10
diff --git a/include/configs/tec.h b/include/configs/tec.h
index 453ecc6..9c2311b 100644
--- a/include/configs/tec.h
+++ b/include/configs/tec.h
@@ -48,9 +48,7 @@
#define CONFIG_CMD_DHCP
/* LCD support */
-#define CONFIG_LCD
#define CONFIG_PWM_TEGRA
-#define LCD_BPP LCD_COLOR16
#define CONFIG_SYS_WHITE_ON_BLACK
/* support the new (FDT-based) image format */
diff --git a/include/configs/ventana.h b/include/configs/ventana.h
index be54f95..8d10dde 100644
--- a/include/configs/ventana.h
+++ b/include/configs/ventana.h
@@ -49,9 +49,7 @@
#define CONFIG_USB_KEYBOARD
/* LCD support */
-#define CONFIG_LCD
#define CONFIG_PWM_TEGRA
-#define LCD_BPP LCD_COLOR16
#define CONFIG_SYS_WHITE_ON_BLACK
#define CONFIG_CONSOLE_SCROLL_LINES 10
--
2.6.0.rc2.230.g3dd15c0
More information about the U-Boot
mailing list