[U-Boot] [PATCH v2 37/55] x86: ivybridge: Convert lpc init code to DM PCI API
Simon Glass
sjg at chromium.org
Mon Jan 18 00:11:42 CET 2016
Adjust this code to use the driver model PCI API. This is all called through
lpc_init_extra().
Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
---
Changes in v2: None
arch/x86/cpu/ivybridge/lpc.c | 129 ++++++++++++++++++++++---------------------
1 file changed, 66 insertions(+), 63 deletions(-)
diff --git a/arch/x86/cpu/ivybridge/lpc.c b/arch/x86/cpu/ivybridge/lpc.c
index 79224d9..0cf55c5 100644
--- a/arch/x86/cpu/ivybridge/lpc.c
+++ b/arch/x86/cpu/ivybridge/lpc.c
@@ -24,13 +24,13 @@
#define ENABLE_ACPI_MODE_IN_COREBOOT 0
#define TEST_SMM_FLASH_LOCKDOWN 0
-static int pch_enable_apic(pci_dev_t dev)
+static int pch_enable_apic(struct udevice *pch)
{
u32 reg32;
int i;
/* Enable ACPI I/O and power management. Set SCI IRQ to IRQ9 */
- x86_pci_write_config8(dev, ACPI_CNTL, 0x80);
+ dm_pci_write_config8(pch, ACPI_CNTL, 0x80);
writel(0, IO_APIC_INDEX);
writel(1 << 25, IO_APIC_DATA);
@@ -66,36 +66,36 @@ static int pch_enable_apic(pci_dev_t dev)
return 0;
}
-static void pch_enable_serial_irqs(pci_dev_t dev)
+static void pch_enable_serial_irqs(struct udevice *pch)
{
u32 value;
/* Set packet length and toggle silent mode bit for one frame. */
value = (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0);
#ifdef CONFIG_SERIRQ_CONTINUOUS_MODE
- x86_pci_write_config8(dev, SERIRQ_CNTL, value);
+ dm_pci_write_config8(pch, SERIRQ_CNTL, value);
#else
- x86_pci_write_config8(dev, SERIRQ_CNTL, value | (1 << 6));
+ dm_pci_write_config8(pch, SERIRQ_CNTL, value | (1 << 6));
#endif
}
-static int pch_pirq_init(const void *blob, int node, pci_dev_t dev)
+static int pch_pirq_init(struct udevice *pch)
{
uint8_t route[8], *ptr;
- if (fdtdec_get_byte_array(blob, node, "intel,pirq-routing", route,
- sizeof(route)))
+ if (fdtdec_get_byte_array(gd->fdt_blob, pch->of_offset,
+ "intel,pirq-routing", route, sizeof(route)))
return -EINVAL;
ptr = route;
- x86_pci_write_config8(dev, PIRQA_ROUT, *ptr++);
- x86_pci_write_config8(dev, PIRQB_ROUT, *ptr++);
- x86_pci_write_config8(dev, PIRQC_ROUT, *ptr++);
- x86_pci_write_config8(dev, PIRQD_ROUT, *ptr++);
+ dm_pci_write_config8(pch, PIRQA_ROUT, *ptr++);
+ dm_pci_write_config8(pch, PIRQB_ROUT, *ptr++);
+ dm_pci_write_config8(pch, PIRQC_ROUT, *ptr++);
+ dm_pci_write_config8(pch, PIRQD_ROUT, *ptr++);
- x86_pci_write_config8(dev, PIRQE_ROUT, *ptr++);
- x86_pci_write_config8(dev, PIRQF_ROUT, *ptr++);
- x86_pci_write_config8(dev, PIRQG_ROUT, *ptr++);
- x86_pci_write_config8(dev, PIRQH_ROUT, *ptr++);
+ dm_pci_write_config8(pch, PIRQE_ROUT, *ptr++);
+ dm_pci_write_config8(pch, PIRQF_ROUT, *ptr++);
+ dm_pci_write_config8(pch, PIRQG_ROUT, *ptr++);
+ dm_pci_write_config8(pch, PIRQH_ROUT, *ptr++);
/*
* TODO(sjg at chromium.org): U-Boot does not set up the interrupts
@@ -104,26 +104,28 @@ static int pch_pirq_init(const void *blob, int node, pci_dev_t dev)
return 0;
}
-static int pch_gpi_routing(const void *blob, int node, pci_dev_t dev)
+static int pch_gpi_routing(struct udevice *pch)
{
u8 route[16];
u32 reg;
int gpi;
- if (fdtdec_get_byte_array(blob, node, "intel,gpi-routing", route,
- sizeof(route)))
+ if (fdtdec_get_byte_array(gd->fdt_blob, pch->of_offset,
+ "intel,gpi-routing", route, sizeof(route)))
return -EINVAL;
for (reg = 0, gpi = 0; gpi < ARRAY_SIZE(route); gpi++)
reg |= route[gpi] << (gpi * 2);
- x86_pci_write_config32(dev, 0xb8, reg);
+ dm_pci_write_config32(pch, 0xb8, reg);
return 0;
}
-static int pch_power_options(const void *blob, int node, pci_dev_t dev)
+static int pch_power_options(struct udevice *pch)
{
+ const void *blob = gd->fdt_blob;
+ int node = pch->of_offset;
u8 reg8;
u16 reg16, pmbase;
u32 reg32;
@@ -142,7 +144,7 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev)
*/
pwr_on = MAINBOARD_POWER_ON;
- reg16 = x86_pci_read_config16(dev, GEN_PMCON_3);
+ dm_pci_read_config16(pch, GEN_PMCON_3, ®16);
reg16 &= 0xfffe;
switch (pwr_on) {
case MAINBOARD_POWER_OFF:
@@ -169,7 +171,7 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev)
reg16 |= (1 << 12); /* Disable SLP stretch after SUS well */
- x86_pci_write_config16(dev, GEN_PMCON_3, reg16);
+ dm_pci_write_config16(pch, GEN_PMCON_3, reg16);
debug("Set power %s after power failure.\n", state);
/* Set up NMI on errors. */
@@ -193,21 +195,22 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev)
outb(reg8, 0x70);
/* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */
- reg16 = x86_pci_read_config16(dev, GEN_PMCON_1);
+ dm_pci_read_config16(pch, GEN_PMCON_1, ®16);
reg16 &= ~(3 << 0); /* SMI# rate 1 minute */
reg16 &= ~(1 << 10); /* Disable BIOS_PCI_EXP_EN for native PME */
#if DEBUG_PERIODIC_SMIS
/* Set DEBUG_PERIODIC_SMIS in pch.h to debug using periodic SMIs */
reg16 |= (3 << 0); /* Periodic SMI every 8s */
#endif
- x86_pci_write_config16(dev, GEN_PMCON_1, reg16);
+ dm_pci_write_config16(pch, GEN_PMCON_1, reg16);
/* Set the board's GPI routing. */
- ret = pch_gpi_routing(blob, node, dev);
+ ret = pch_gpi_routing(pch);
if (ret)
return ret;
- pmbase = x86_pci_read_config16(dev, 0x40) & 0xfffe;
+ dm_pci_read_config16(pch, 0x40, &pmbase);
+ pmbase &= 0xfffe;
writel(pmbase + GPE0_EN, fdtdec_get_int(blob, node,
"intel,gpe0-enable", 0));
@@ -227,16 +230,16 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev)
return 0;
}
-static void pch_rtc_init(pci_dev_t dev)
+static void pch_rtc_init(struct udevice *pch)
{
int rtc_failed;
u8 reg8;
- reg8 = x86_pci_read_config8(dev, GEN_PMCON_3);
+ dm_pci_read_config8(pch, GEN_PMCON_3, ®8);
rtc_failed = reg8 & RTC_BATTERY_DEAD;
if (rtc_failed) {
reg8 &= ~RTC_BATTERY_DEAD;
- x86_pci_write_config8(dev, GEN_PMCON_3, reg8);
+ dm_pci_write_config8(pch, GEN_PMCON_3, reg8);
}
debug("rtc_failed = 0x%x\n", rtc_failed);
@@ -246,10 +249,10 @@ static void pch_rtc_init(pci_dev_t dev)
}
/* CougarPoint PCH Power Management init */
-static void cpt_pm_init(pci_dev_t dev)
+static void cpt_pm_init(struct udevice *pch)
{
debug("CougarPoint PM init\n");
- x86_pci_write_config8(dev, 0xa9, 0x47);
+ dm_pci_write_config8(pch, 0xa9, 0x47);
setbits_le32(RCB_REG(0x2238), (1 << 6) | (1 << 0));
setbits_le32(RCB_REG(0x228c), 1 << 0);
@@ -290,10 +293,10 @@ static void cpt_pm_init(pci_dev_t dev)
}
/* PantherPoint PCH Power Management init */
-static void ppt_pm_init(pci_dev_t dev)
+static void ppt_pm_init(struct udevice *pch)
{
debug("PantherPoint PM init\n");
- x86_pci_write_config8(dev, 0xa9, 0x47);
+ dm_pci_write_config8(pch, 0xa9, 0x47);
setbits_le32(RCB_REG(0x2238), 1 << 0);
setbits_le32(RCB_REG(0x228c), 1 << 0);
setbits_le16(RCB_REG(0x1100), (1 << 13) | (1 << 14));
@@ -340,16 +343,16 @@ static void enable_hpet(void)
clrsetbits_le32(RCB_REG(HPTC), 3 << 0, 1 << 7);
}
-static void enable_clock_gating(pci_dev_t dev)
+static void enable_clock_gating(struct udevice *pch)
{
u32 reg32;
u16 reg16;
setbits_le32(RCB_REG(0x2234), 0xf);
- reg16 = x86_pci_read_config16(dev, GEN_PMCON_1);
+ dm_pci_read_config16(pch, GEN_PMCON_1, ®16);
reg16 |= (1 << 2) | (1 << 11);
- x86_pci_write_config16(dev, GEN_PMCON_1, reg16);
+ dm_pci_write_config16(pch, GEN_PMCON_1, reg16);
pch_iobp_update(0xEB007F07, ~0UL, (1 << 31));
pch_iobp_update(0xEB004000, ~0UL, (1 << 7));
@@ -429,24 +432,24 @@ static void pch_lock_smm(pci_dev_t dev)
}
#endif
-static void pch_disable_smm_only_flashing(pci_dev_t dev)
+static void pch_disable_smm_only_flashing(struct udevice *pch)
{
u8 reg8;
debug("Enabling BIOS updates outside of SMM... ");
- reg8 = x86_pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+ dm_pci_read_config8(pch, 0xdc, ®8); /* BIOS_CNTL */
reg8 &= ~(1 << 5);
- x86_pci_write_config8(dev, 0xdc, reg8);
+ dm_pci_write_config8(pch, 0xdc, reg8);
}
-static void pch_fixups(pci_dev_t dev)
+static void pch_fixups(struct udevice *pch)
{
u8 gen_pmcon_2;
/* Indicate DRAM init done for MRC S3 to know it can resume */
- gen_pmcon_2 = x86_pci_read_config8(dev, GEN_PMCON_2);
+ dm_pci_read_config8(pch, GEN_PMCON_2, &gen_pmcon_2);
gen_pmcon_2 |= (1 << 7);
- x86_pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2);
+ dm_pci_write_config8(pch, GEN_PMCON_2, gen_pmcon_2);
/* Enable DMI ASPM in the PCH */
clrbits_le32(RCB_REG(0x2304), 1 << 10);
@@ -538,66 +541,66 @@ static int lpc_early_init(struct udevice *dev)
return 0;
}
-static int lpc_init_extra(struct pci_controller *hose, pci_dev_t dev)
+static int lpc_init_extra(struct udevice *dev)
{
+ struct udevice *pch = dev->parent;
const void *blob = gd->fdt_blob;
int node;
debug("pch: lpc_init\n");
- pci_write_bar32(hose, dev, 0, 0);
- pci_write_bar32(hose, dev, 1, 0xff800000);
- pci_write_bar32(hose, dev, 2, 0xfec00000);
- pci_write_bar32(hose, dev, 3, 0x800);
- pci_write_bar32(hose, dev, 4, 0x900);
+ dm_pci_write_bar32(pch, 0, 0);
+ dm_pci_write_bar32(pch, 1, 0xff800000);
+ dm_pci_write_bar32(pch, 2, 0xfec00000);
+ dm_pci_write_bar32(pch, 3, 0x800);
+ dm_pci_write_bar32(pch, 4, 0x900);
node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_PCH);
if (node < 0)
return -ENOENT;
/* Set the value for PCI command register. */
- x86_pci_write_config16(dev, PCI_COMMAND, 0x000f);
+ dm_pci_write_config16(pch, PCI_COMMAND, 0x000f);
/* IO APIC initialization. */
- pch_enable_apic(dev);
+ pch_enable_apic(pch);
- pch_enable_serial_irqs(dev);
+ pch_enable_serial_irqs(pch);
/* Setup the PIRQ. */
- pch_pirq_init(blob, node, dev);
+ pch_pirq_init(pch);
/* Setup power options. */
- pch_power_options(blob, node, dev);
+ pch_power_options(pch);
/* Initialize power management */
switch (pch_silicon_type()) {
case PCH_TYPE_CPT: /* CougarPoint */
- cpt_pm_init(dev);
+ cpt_pm_init(pch);
break;
case PCH_TYPE_PPT: /* PantherPoint */
- ppt_pm_init(dev);
+ ppt_pm_init(pch);
break;
default:
- printf("Unknown Chipset: %#02x.%dx\n", PCI_DEV(dev),
- PCI_FUNC(dev));
+ printf("Unknown Chipset: %s\n", pch->name);
return -ENOSYS;
}
/* Initialize the real time clock. */
- pch_rtc_init(dev);
+ pch_rtc_init(pch);
/* Initialize the High Precision Event Timers, if present. */
enable_hpet();
/* Initialize Clock Gating */
- enable_clock_gating(dev);
+ enable_clock_gating(pch);
- pch_disable_smm_only_flashing(dev);
+ pch_disable_smm_only_flashing(pch);
#if CONFIG_HAVE_SMI_HANDLER
pch_lock_smm(dev);
#endif
- pch_fixups(dev);
+ pch_fixups(pch);
return 0;
}
@@ -636,7 +639,7 @@ static int bd82x6x_lpc_probe(struct udevice *dev)
return bd82x6x_lpc_early_init(dev);
}
- return lpc_init_extra(pci_bus_to_hose(0), PCH_LPC_DEV);
+ return lpc_init_extra(dev);
}
static const struct udevice_id bd82x6x_lpc_ids[] = {
--
2.6.0.rc2.230.g3dd15c0
More information about the U-Boot
mailing list