[U-Boot] [PATCH] ARM: Disable "DISCARD" for secure section if CONFIG_ARMV7_SECURE_BASE isn't defined
Dongsheng Wang
dongsheng.wang at nxp.com
Mon Jan 18 04:02:35 CET 2016
Hi Tom,
Thanks for your review.
I will update this patch.
Regards,
-Dongsheng
> On Mon, Jan 11, 2016 at 02:51:39AM +0000, Dongsheng Wang wrote:
> > Hi Tom,
> >
> > Sorry for my late reply, and thanks for your reply.
> >
> > How about the following comments, following your suggestion I remove
> some redundant comments?
> >
> > If my understanding is wrong, please correct me, thanks:
> > #if defined(CONFIG_ARMV7_SECURE_BASE) &&
> defined(CONFIG_ARMV7_NONSEC)
> > /*
> > * If CONFIG_ARMV7_SECURE_BASE is true, secure code will not
> > * bundle with u-boot, and codes offset are fixed. Secure zone
>
> code offsets
>
> > * only needs to be copied from loading address to
>
> from the loading address
>
> > * CONFIG_ARMV7_SECURE_BASE, which is the linking and running
> > * address for secure code.
> > *
> > * If undefine CONFIG_ARMV7_SECURE_BASE secure zone will be
>
> If CONFIG_ARMV7_SECURE_BASE is undefined, the secure zone will be
>
> > * included in u-boot space, and some absolute address were
> > used
>
> u-boot address space
>
> > * in secure code. Accompanied by u-boot relocation secure code
> > * also need to relocate the absolute address.
>
> in secure code. The absolute addresses of the secure code also needs to be
> relocated along with the accompanying u-boot code.
>
> > *
> > * So DISCARD is only for CONFIG_ARMV7_SECURE_BASE.
> > */
> > /DISCARD/ : { *(.rel._secure*) } #endif
>
> Otherwise looks good, thanks!
>
> --
> Tom
More information about the U-Boot
mailing list