[U-Boot] [PATCH 2/2] x86: BayTrail: Add option to disable the internal UART to setup_early_uart()

[Bin Meng]

Hi Stefan,

On Tue, Jan 19, 2016 at 9:05 PM, Stefan Roese <sr at denx.de> wrote:
> This patch adds a parameter to the function setup_early_uart() to either
> enable or disable the internal BayTrail legacy UART. Since the name
> setup_early_uart() does not match its functionality any more, lets
> rename it to setup_internal_uart() as well in this patch.
>
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Bin Meng <bmeng.cn at gmail.com>
> Cc: Simon Glass <sjg at chromium.org>
> ---
>  arch/x86/cpu/baytrail/early_uart.c | 10 +++++++---
>  arch/x86/include/asm/u-boot-x86.h  |  2 +-
>  arch/x86/lib/fsp/fsp_support.c     |  2 +-
>  3 files changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/arch/x86/cpu/baytrail/early_uart.c b/arch/x86/cpu/baytrail/early_uart.c
> index b64a3a9..471d592 100644
> --- a/arch/x86/cpu/baytrail/early_uart.c
> +++ b/arch/x86/cpu/baytrail/early_uart.c
> @@ -59,11 +59,15 @@ static void x86_pci_write_config32(int dev, unsigned int where, u32 value)
>  }
>
>  /* This can be called after memory-mapped PCI is working */
> -int setup_early_uart(void)
> +int setup_internal_uart(int enable)
>  {
> -       /* Enable the legacy UART hardware. */
> +       /* Enable or disable the legacy UART hardware */
>         x86_pci_write_config32(PCI_DEV_CONFIG(0, LPC_DEV, LPC_FUNC), UART_CONT,
> -                              1);
> +                              enable);
> +
> +       /* All done for the disable part, so just return */
> +       if (!enable)
> +               return 0;
>
>         /*
>          * Set up the pads to the UART function. This allows the signals to
> diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h
> index dbf8e95..cc5c953 100644
> --- a/arch/x86/include/asm/u-boot-x86.h
> +++ b/arch/x86/include/asm/u-boot-x86.h
> @@ -45,7 +45,7 @@ void dram_init_banksize(void);
>  int default_print_cpuinfo(void);
>
>  /* Set up a UART which can be used with printch(), printhex8(), etc. */
> -int setup_early_uart(void);
> +int setup_internal_uart(int enable);
>
>  void setup_pcat_compatibility(void);
>
> diff --git a/arch/x86/lib/fsp/fsp_support.c b/arch/x86/lib/fsp/fsp_support.c
> index 875c96a..29fa060 100644
> --- a/arch/x86/lib/fsp/fsp_support.c
> +++ b/arch/x86/lib/fsp/fsp_support.c
> @@ -111,7 +111,7 @@ void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf)
>  #endif
>
>  #ifdef CONFIG_DEBUG_UART
> -       setup_early_uart();
> +       setup_internal_uart(1);
>  #endif
>
>         fsp_hdr = find_fsp_header();
> --

There is one more instance of setup_early_uart() in README.x86 that
needs to be changed.

Other than that,
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>

Regards,
Bin