[U-Boot] [PATCH ] board: ls2080a: Add "mcinitcmd" env for MC & DPL deployment

york sun york.sun at nxp.com
Wed Jan 20 17:02:19 CET 2016


On 01/19/2016 10:59 PM, Pratiyush Mohan Srivastava wrote:
> From: Pratiyush Mohan Srivastava <pratiyush.srivastava at nxp.com>
> 
> Environment variable mcinitcmd is defined to initiate MC and DPL deployment
> from the location where it is stored(NOR, NAND, SD, SATA, USB)during u-boot
> booting.If this variable is not defined then macro MC_BOOT_ENV_VAR will be null and
> MC will not be booted and DPL will not be applied during U-boot booting.
> 
> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava at nxp.com>
> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
> ---
>  arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 | 29 ++++++++++++++++++++++++++
>  board/freescale/ls2080aqds/eth.c               |  5 +++++
>  board/freescale/ls2080ardb/eth_ls2080rdb.c     |  5 +++++
>  3 files changed, 39 insertions(+)
> 

<snip>

> diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c
> index 5b9c2d1..db9de77 100644
> --- a/board/freescale/ls2080aqds/eth.c
> +++ b/board/freescale/ls2080aqds/eth.c
> @@ -20,6 +20,7 @@
>  
>  #include "ls2080aqds_qixis.h"
>  
> +#define MC_BOOT_ENV_VAR "mcinitcmd"
>  
>  #ifdef CONFIG_FSL_MC_ENET
>   /* - In LS2080A there are only 16 SERDES lanes, spread across 2 SERDES banks.
> @@ -714,6 +715,7 @@ void ls2080a_handle_phy_interface_xsgmii(int i)
>  int board_eth_init(bd_t *bis)
>  {
>  	int error;
> +	char *mc_boot_env_var;
>  #ifdef CONFIG_FSL_MC_ENET
>  	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
>  	int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) &
> @@ -781,6 +783,9 @@ int board_eth_init(bd_t *bis)
>  		}
>  	}
>  
> +	mc_boot_env_var = getenv(MC_BOOT_ENV_VAR);
> +	if (mc_boot_env_var)
> +		run_command_list(mc_boot_env_var, -1, 0);
>  	error = cpu_eth_init(bis);

Why not put the code into cpu_eth_init()?

York



More information about the U-Boot mailing list