[U-Boot] [PATCH 7/8] test/py: ums: add filesystem-based testing
Stephen Warren
swarren at wwwdotorg.org
Wed Jan 20 23:15:57 CET 2016
From: Stephen Warren <swarren at nvidia.com>
Enhance the UMS test to optionally mount a partition and read/write a file
to it, validating that the content written and read back are identical.
This enhancement is backwards-compatible; old boardenv contents that don't
define the new configuration data will cause the test code to perform as
before.
test/ums/ is deleted since the Python test now performs the same testing
that it did.
The code is also re-written to make use of the recently added utility
module, and split it up into nested functions so the overall logic of
the test process can be followed more easily without the details
cluttering the code.
Cc: Lukasz Majewski <l.majewski at samsung.com>
Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
test/py/tests/test_ums.py | 212 +++++++++++++++++++++++++++++++++++---------
test/ums/README | 30 -------
test/ums/ums_gadget_test.sh | 183 --------------------------------------
3 files changed, 169 insertions(+), 256 deletions(-)
delete mode 100644 test/ums/README
delete mode 100755 test/ums/ums_gadget_test.sh
diff --git a/test/py/tests/test_ums.py b/test/py/tests/test_ums.py
index a137221c7a5b..cb6e5ef8c20b 100644
--- a/test/py/tests/test_ums.py
+++ b/test/py/tests/test_ums.py
@@ -7,8 +7,11 @@
# should be enhanced to validate disk IO.
import os
+import os.path
import pytest
+import re
import time
+import u_boot_utils
'''
Note: This test relies on:
@@ -17,13 +20,36 @@ a) boardenv_* to contain configuration values to define which USB ports are
available for testing. Without this, this test will be automatically skipped.
For example:
+# Leave this list empty if you have no block_devs below with writable
+# partitions defined.
+env__mount_points = (
+ "/mnt/ubtest-mnt-p2371-2180-na",
+)
+
env__usb_dev_ports = (
- {'tgt_usb_ctlr': '0', 'host_ums_dev_node': '/dev/disk/by-path/pci-0000:00:14.0-usb-0:13:1.0-scsi-0:0:0:0'},
+ {
+ "tgt_usb_ctlr": "0",
+ "host_ums_dev_node": "/dev/disk/by-path/pci-0000:00:14.0-usb-0:13:1.0-scsi-0:0:0:0",
+ },
)
env__block_devs = (
- {'type': 'mmc', 'id': '0'}, # eMMC; always present
- {'type': 'mmc', 'id': '1'}, # SD card; present since I plugged one in
+ # eMMC; always present
+ {
+ "type": "mmc",
+ "id": "0",
+ # The following two properties are optional.
+ # If present, the partition will be mounted and a file written-to and
+ # read-from it. If missing, only a simple block read test will be
+ # performed.
+ "writable_fs_partition": 1,
+ "writable_fs_subdir": "tmp/",
+ },
+ # SD card; present since I plugged one in
+ {
+ "type": "mmc",
+ "id": "1"
+ },
)
b) udev rules to set permissions on devices nodes, so that sudo is not
@@ -34,41 +60,15 @@ ACTION=="add", SUBSYSTEM=="block", SUBSYSTEMS=="usb", KERNELS=="3-13", MODE:="66
(You may wish to change the group ID instead of setting the permissions wide
open. All that matters is that the user ID running the test can access the
device.)
-'''
-def open_ums_device(host_ums_dev_node):
- '''Attempt to open a device node, returning either the opened file handle,
- or None on any error.'''
+c) /etc/fstab entries to allow the block device to be mounted without requiring
+root permissions. For example:
- try:
- return open(host_ums_dev_node, 'rb')
- except:
- return None
-
-def wait_for_ums_device(host_ums_dev_node):
- '''Continually attempt to open the device node exported by the "ums"
- command, and either return the opened file handle, or raise an exception
- after a timeout.'''
-
- for i in xrange(100):
- fh = open_ums_device(host_ums_dev_node)
- if fh:
- return fh
- time.sleep(0.1)
- raise Exception('UMS device did not appear')
-
-def wait_for_ums_device_gone(host_ums_dev_node):
- '''Continually attempt to open the device node exported by the "ums"
- command, and either return once the device has disappeared, or raise an
- exception if it does not before a timeout occurs.'''
-
- for i in xrange(100):
- fh = open_ums_device(host_ums_dev_node)
- if not fh:
- return
- fh.close()
- time.sleep(0.1)
- raise Exception('UMS device did not disappear')
+/dev/disk/by-path/pci-0000:00:14.0-usb-0:13:1.0-scsi-0:0:0:0-part1 /mnt/ubtest-mnt-p2371-2180-na ext4 noauto,user,nosuid,nodev
+
+This entry is only needed if any block_devs above contain a
+writable_fs_partition value.
+'''
@pytest.mark.buildconfigspec('cmd_usb_mass_storage')
def test_ums(u_boot_console, env__usb_dev_port, env__block_devs):
@@ -76,6 +76,14 @@ def test_ums(u_boot_console, env__usb_dev_port, env__block_devs):
device when "ums" is running, and this device must disappear when "ums" is
aborted.'''
+ have_writable_fs_partition = 'writable_fs_partition' in env__block_devs[0]
+ if not have_writable_fs_partition:
+ # If 'writable_fs_subdir' is missing, we'll skip all parts of the
+ # testing which mount filesystems.
+ u_boot_console.log.warning(
+ 'boardenv missing "writable_fs_partition"; ' +
+ 'UMS testing will be limited.')
+
tgt_usb_ctlr = env__usb_dev_port['tgt_usb_ctlr']
host_ums_dev_node = env__usb_dev_port['host_ums_dev_node']
@@ -84,11 +92,129 @@ def test_ums(u_boot_console, env__usb_dev_port, env__block_devs):
# device list here. We'll test each block device somewhere else.
tgt_dev_type = env__block_devs[0]['type']
tgt_dev_id = env__block_devs[0]['id']
+ if have_writable_fs_partition:
+ mount_point = u_boot_console.config.env['env__mount_points'][0]
+ mount_subdir = env__block_devs[0]['writable_fs_subdir']
+ part_num = env__block_devs[0]['writable_fs_partition']
+ host_ums_part_node = '%s-part%d' % (host_ums_dev_node, part_num)
+ else:
+ host_ums_part_node = host_ums_dev_node
+
+ test_f = u_boot_utils.PersistentRandomFile(u_boot_console, 'ums.bin',
+ 1024 * 1024);
+ if have_writable_fs_partition:
+ mounted_test_fn = mount_point + '/' + mount_subdir + test_f.fn
+
+ def start_ums():
+ '''Start U-Boot's ums shell command.
+
+ This also waits for the host-side USB enumeration process to complete.
+
+ Args:
+ None.
+
+ Returns:
+ Nothing.
+ '''
+
+ u_boot_console.log.action(
+ 'Starting long-running U-Boot ums shell command')
+ cmd = 'ums %s %s %s' % (tgt_usb_ctlr, tgt_dev_type, tgt_dev_id)
+ u_boot_console.run_command(cmd, wait_for_prompt=False)
+ u_boot_console.wait_for(re.compile('UMS: LUN.*[\r\n]'))
+ fh = u_boot_utils.wait_until_open_succeeds(host_ums_part_node)
+ u_boot_console.log.action('Reading raw data from UMS device')
+ fh.read(4096)
+ fh.close()
+
+ def mount():
+ '''Mount the block device that U-Boot exports.
+
+ Args:
+ None.
+
+ Returns:
+ Nothing.
+ '''
- cmd = 'ums %s %s %s' % (tgt_usb_ctlr, tgt_dev_type, tgt_dev_id)
- u_boot_console.run_command('ums 0 mmc 0', wait_for_prompt=False)
- fh = wait_for_ums_device(host_ums_dev_node)
- fh.read(4096)
- fh.close()
- u_boot_console.ctrlc()
- wait_for_ums_device_gone(host_ums_dev_node)
+ u_boot_console.log.action('Mounting exported UMS device')
+ cmd = ('/bin/mount', host_ums_part_node)
+ u_boot_utils.run_and_log(u_boot_console, cmd)
+
+ def umount(ignore_errors):
+ '''Unmount the block device that U-Boot exports.
+
+ Args:
+ ignore_errors: Ignore any errors. This is useful if an error has
+ already been detected, and the code is performing best-effort
+ cleanup. In this case, we do not want to mask the original
+ error by "honoring" any new errors.
+
+ Returns:
+ Nothing.
+ '''
+
+ u_boot_console.log.action('Unmounting UMS device')
+ cmd = ('/bin/umount', host_ums_part_node)
+ u_boot_utils.run_and_log(u_boot_console, cmd, ignore_errors)
+
+ def stop_ums(ignore_errors):
+ '''Stop U-Boot's ums shell command from executing.
+
+ This also waits for the host-side USB de-enumeration process to
+ complete.
+
+ Args:
+ ignore_errors: Ignore any errors. This is useful if an error has
+ already been detected, and the code is performing best-effort
+ cleanup. In this case, we do not want to mask the original
+ error by "honoring" any new errors.
+
+ Returns:
+ Nothing.
+ '''
+
+ u_boot_console.log.action(
+ 'Stopping long-running U-Boot ums shell command')
+ u_boot_console.ctrlc()
+ u_boot_utils.wait_until_file_open_fails(host_ums_part_node,
+ ignore_errors)
+
+ ignore_cleanup_errors = True
+ try:
+ start_ums()
+ if not have_writable_fs_partition:
+ # Skip filesystem-based testing if not configured
+ return
+ try:
+ mount()
+ u_boot_console.log.action('Writing test file via UMS')
+ cmd = ('rm', '-f', mounted_test_fn)
+ u_boot_utils.run_and_log(u_boot_console, cmd)
+ if os.path.exists(mounted_test_fn):
+ raise Exception('Could not rm target UMS test file')
+ cmd = ('cp', test_f.abs_fn, mounted_test_fn)
+ u_boot_utils.run_and_log(u_boot_console, cmd)
+ ignore_cleanup_errors = False
+ finally:
+ umount(ignore_errors=ignore_cleanup_errors)
+ finally:
+ stop_ums(ignore_errors=ignore_cleanup_errors)
+
+ ignore_cleanup_errors = True
+ try:
+ start_ums()
+ try:
+ mount()
+ u_boot_console.log.action('Reading test file back via UMS')
+ read_back_hash = u_boot_utils.md5sum_file(mounted_test_fn)
+ cmd = ('rm', '-f', mounted_test_fn)
+ u_boot_utils.run_and_log(u_boot_console, cmd)
+ ignore_cleanup_errors = False
+ finally:
+ umount(ignore_errors=ignore_cleanup_errors)
+ finally:
+ stop_ums(ignore_errors=ignore_cleanup_errors)
+
+ written_hash = test_f.content_hash
+ assert(written_hash == read_back_hash)
diff --git a/test/ums/README b/test/ums/README
deleted file mode 100644
index c80fbfefbf52..000000000000
--- a/test/ums/README
+++ /dev/null
@@ -1,30 +0,0 @@
-UMS test script.
-
-ums_gadget_test.sh
-==================
-
-Example usage:
-1. On the target:
- create UMS exportable partitions (with e.g. gpt write), or specify a
- partition number (PART_NUM) as "-" to use the entire device
- ums 0 mmc 0
-2. On the host:
- sudo test/ums/ums_gadget_test.sh VID PID PART_NUM [-f FILE_SYSTEM] [test_file]
- e.g. sudo test/ums/ums_gadget_test.sh 0525 a4a5 6 -f vfat ./dat_14M.img
-
-... where:
- VID - UMS device USB Vendor ID
- PID - UMS device USB Product ID
- PART_NUM - is the partition number on which UMS operates or "-" to use the
- whole device
-
-Information about available partitions on the target one can read with using
-the 'mmc part' or 'part list' commands.
-
-The partition num (PART_NUM) can be specified as '-' for using the whole device.
-
-The [-f FILE_SYSTEM] optional switch allows for formatting target partition to
-FILE_SYSTEM.
-
-The last, optional [test_file] parameter is for specifying the exact test file
-to use.
diff --git a/test/ums/ums_gadget_test.sh b/test/ums/ums_gadget_test.sh
deleted file mode 100755
index 9da486b266ce..000000000000
--- a/test/ums/ums_gadget_test.sh
+++ /dev/null
@@ -1,183 +0,0 @@
-#! /bin/bash
-
-# Copyright (C) 2014 Samsung Electronics
-# Lukasz Majewski <l.majewski at samsung.com>
-#
-# UMS operation test script
-#
-# SPDX-License-Identifier: GPL-2.0+
-
-clear
-
-COLOUR_RED="\33[31m"
-COLOUR_GREEN="\33[32m"
-COLOUR_ORANGE="\33[33m"
-COLOUR_DEFAULT="\33[0m"
-
-DIR=./
-SUFFIX=img
-RCV_DIR=rcv/
-LOG_FILE=./log/log-`date +%d-%m-%Y_%H-%M-%S`
-
-cd `dirname $0`
-../dfu/dfu_gadget_test_init.sh 33M 97M
-
-cleanup () {
- rm -rf $RCV_DIR $MNT_DIR
-}
-
-control_c()
-# run if user hits control-c
-{
- echo -en "\n*** CTRL+C ***\n"
- umount $MNT_DIR
- cleanup
- exit 0
-}
-
-# trap keyboard interrupt (control-c)
-trap control_c SIGINT
-
-die () {
- printf " $COLOUR_RED FAILED $COLOUR_DEFAULT \n"
- cleanup
- exit 1
-}
-
-calculate_md5sum () {
- MD5SUM=`md5sum $1`
- MD5SUM=`echo $MD5SUM | cut -d ' ' -f1`
- echo "md5sum:"$MD5SUM
-}
-
-ums_test_file () {
- printf "$COLOUR_GREEN========================================================================================= $COLOUR_DEFAULT\n"
- printf "File:$COLOUR_GREEN %s $COLOUR_DEFAULT\n" $1
-
- mount /dev/$MEM_DEV $MNT_DIR
- if [ -f $MNT_DIR/dat_* ]; then
- rm $MNT_DIR/dat_*
- fi
-
- cp ./$1 $MNT_DIR
-
- while true; do
- umount $MNT_DIR > /dev/null 2>&1
- if [ $? -eq 0 ]; then
- break
- fi
- printf "$COLOUR_ORANGE\tSleeping to wait for umount...$COLOUR_DEFAULT\n"
- sleep 1
- done
-
- echo -n "TX: "
- calculate_md5sum $1
-
- MD5_TX=$MD5SUM
- sleep 1
- N_FILE=$DIR$RCV_DIR${1:2}"_rcv"
-
- mount /dev/$MEM_DEV $MNT_DIR
- cp $MNT_DIR/$1 $N_FILE || die $?
- rm $MNT_DIR/$1
- umount $MNT_DIR
-
- echo -n "RX: "
- calculate_md5sum $N_FILE
- MD5_RX=$MD5SUM
-
- if [ "$MD5_TX" == "$MD5_RX" ]; then
- printf " $COLOUR_GREEN -------> OK $COLOUR_DEFAULT \n"
- else
- printf " $COLOUR_RED -------> FAILED $COLOUR_DEFAULT \n"
- cleanup
- exit 1
- fi
-}
-
-printf "$COLOUR_GREEN========================================================================================= $COLOUR_DEFAULT\n"
-echo "U-boot UMS test program"
-
-if [ $EUID -ne 0 ]; then
- echo "You must be root to do this." 1>&2
- exit 100
-fi
-
-if [ $# -lt 3 ]; then
- echo "Wrong number of arguments"
- echo "Example:"
- echo "sudo ./ums_gadget_test.sh VID PID PART_NUM [-f ext4] [test_file]"
- die
-fi
-
-MNT_DIR="/mnt/tmp-ums-test"
-
-VID=$1; shift
-PID=$1; shift
-PART_NUM=$1; shift
-
-if [ "$1" == "-f" ]; then
- shift
- FS_TO_FORMAT=$1; shift
-fi
-
-TEST_FILE=$1
-
-for f in `find /sys -type f -name idProduct`; do
- d=`dirname ${f}`
- if [ `cat ${d}/idVendor` != "${VID}" ]; then
- continue
- fi
- if [ `cat ${d}/idProduct` != "${PID}" ]; then
- continue
- fi
- USB_DEV=${d}
- break
-done
-
-if [ -z "${USB_DEV}" ]; then
- echo "Connect target"
- echo "e.g. ums 0 mmc 0"
- exit 1
-fi
-
-MEM_DEV=`find $USB_DEV -type d -name "sd[a-z]" | awk -F/ '{print $(NF)}' -`
-
-mkdir -p $RCV_DIR
-if [ ! -d $MNT_DIR ]; then
- mkdir -p $MNT_DIR
-fi
-
-if [ "$PART_NUM" == "-" ]; then
- PART_NUM=""
-fi
-MEM_DEV=$MEM_DEV$PART_NUM
-
-if [ -n "$FS_TO_FORMAT" ]; then
- echo -n "Formatting partition /dev/$MEM_DEV to $FS_TO_FORMAT"
- mkfs -t $FS_TO_FORMAT /dev/$MEM_DEV > /dev/null 2>&1
- if [ $? -eq 0 ]; then
- printf " $COLOUR_GREEN DONE $COLOUR_DEFAULT \n"
- else
- die
- fi
-fi
-
-printf "Mount: /dev/$MEM_DEV \n"
-
-if [ -n "$TEST_FILE" ]; then
- if [ ! -e $TEST_FILE ]; then
- echo "No file: $TEST_FILE"
- die
- fi
- ums_test_file $TEST_FILE
-else
- for file in $DIR*.$SUFFIX
- do
- ums_test_file $file
- done
-fi
-
-cleanup
-
-exit 0
--
2.7.0
More information about the U-Boot
mailing list