[U-Boot] [PATCH] board/t4240rdb: VID support

[york sun]

On 01/20/2016 02:26 PM, york.sun at nxp.com wrote:

<snip>

> Ying,
> 
> This patch looks OK but the board doesn't work. I traced the code to the first
> setting voltage. The VID has 1025mV and current voltage is 1047mV. As soon as
> the code drops voltage by one step, the board hangs. Please double check if the
> voltage setting is correct. You can measure it on the board to confirm.
> 

I tested it on top of b57843e68804c2d53d2cff2b8b2238e37b388faa, with two boards.
The result is the same.

York