[U-Boot] [PATCH 1/4] ARM: uniphier: fix NOR boot command
Masahiro Yamada
yamada.masahiro at socionext.com
Thu Jan 21 06:56:06 CET 2016
Commit 89835b3557fe ("ARM: uniphier: allow to run zImage rather than
uImage") changed the kernel boot commands. Unlike "bootm", "bootz"
does not relocate the kernel image. When the boot device is a NOR
flash, the zImage should be copied from the NOR onto DRAM before
passing it to the "bootz" command.
Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---
include/configs/uniphier.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 599b269..86471a2 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -203,9 +203,10 @@
"ramdisk_file=rootfs.cpio.uboot\0" \
"norboot=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
"setexpr kernel_addr $nor_base + $kernel_addr &&" \
+ "cp.b $kernel_addr $kernel_addr_r $kernel_size &&" \
"setexpr ramdisk_addr $nor_base + $ramdisk_addr &&" \
"setexpr fdt_addr $nor_base + $fdt_addr &&" \
- "bootz $kernel_addr $ramdisk_addr $fdt_addr\0" \
+ "bootz $kernel_addr_r $ramdisk_addr $fdt_addr\0" \
"nandboot=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
"nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
"nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
@@ -221,7 +222,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"verify=n\0" \
- "norbase=0x42000000\0" \
+ "nor_base=0x42000000\0" \
"nandupdate=nand erase 0 0x00100000 &&" \
"tftpboot u-boot-spl-dtb.bin &&" \
"nand write $loadaddr 0 0x00010000 &&" \
--
1.9.1
More information about the U-Boot
mailing list