[U-Boot] [PATCH V4 7/8] test/py: test the ums command
Lukasz Majewski
l.majewski at samsung.com
Thu Jan 21 12:06:34 CET 2016
Hi Stephen,
> From: Stephen Warren <swarren at nvidia.com>
>
> This test invokes the "ums" command in U-Boot, and validates that a
> USB storage device is enumerated on the test host system, and can be
> read from.
>
> Signed-off-by: Stephen Warren <swarren at nvidia.com>
> Acked-by: Simon Glass <sjg at chromium.org>
> ---
> v4:
> - No changes.
>
> v3:
> - Move test scripts into a sub-directory.
> Suggested by Michal Simek.
> - s/uboot/u[-_]boot/g. Suggested by Simon Glass.
> - s/"/'/g. Suggested by Simon Glass.
> - Add more documentation. Suggested by Simon Glass.
> - Rename boardenv USB device node variable to avoid naming conflicts
> if we add support for other types of USB device later (e.g. CDC ACM,
> CDC Ethernet, DFU).
> ---
> test/py/tests/test_ums.py | 94
> +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 94
> insertions(+) create mode 100644 test/py/tests/test_ums.py
>
> diff --git a/test/py/tests/test_ums.py b/test/py/tests/test_ums.py
> new file mode 100644
> index 000000000000..a137221c7a5b
> --- /dev/null
> +++ b/test/py/tests/test_ums.py
> @@ -0,0 +1,94 @@
> +# Copyright (c) 2015-2016, NVIDIA CORPORATION. All rights reserved.
> +#
> +# SPDX-License-Identifier: GPL-2.0
> +
> +# Test U-Boot's "ums" command. At present, this test only ensures
> that a UMS +# device can be enumerated by the host/test machine. In
> the future, this test +# should be enhanced to validate disk IO.
> +
> +import os
> +import pytest
> +import time
> +
> +'''
> +Note: This test relies on:
> +
> +a) boardenv_* to contain configuration values to define which USB
> ports are +available for testing. Without this, this test will be
> automatically skipped. +For example:
> +
> +env__usb_dev_ports = (
> + {'tgt_usb_ctlr': '0', 'host_ums_dev_node':
> '/dev/disk/by-path/pci-0000:00:14.0-usb-0:13:1.0-scsi-0:0:0:0'}, +)
> +
> +env__block_devs = (
> + {'type': 'mmc', 'id': '0'}, # eMMC; always present
> + {'type': 'mmc', 'id': '1'}, # SD card; present since I plugged
> one in +)
> +
> +b) udev rules to set permissions on devices nodes, so that sudo is
> not +required. For example:
> +
> +ACTION=="add", SUBSYSTEM=="block", SUBSYSTEMS=="usb",
> KERNELS=="3-13", MODE:="666" +
> +(You may wish to change the group ID instead of setting the
> permissions wide +open. All that matters is that the user ID running
> the test can access the +device.)
> +'''
> +
> +def open_ums_device(host_ums_dev_node):
> + '''Attempt to open a device node, returning either the opened
> file handle,
> + or None on any error.'''
> +
> + try:
> + return open(host_ums_dev_node, 'rb')
> + except:
> + return None
> +
> +def wait_for_ums_device(host_ums_dev_node):
> + '''Continually attempt to open the device node exported by the
> "ums"
> + command, and either return the opened file handle, or raise an
> exception
> + after a timeout.'''
> +
> + for i in xrange(100):
> + fh = open_ums_device(host_ums_dev_node)
> + if fh:
> + return fh
> + time.sleep(0.1)
> + raise Exception('UMS device did not appear')
> +
> +def wait_for_ums_device_gone(host_ums_dev_node):
> + '''Continually attempt to open the device node exported by the
> "ums"
> + command, and either return once the device has disappeared, or
> raise an
> + exception if it does not before a timeout occurs.'''
> +
> + for i in xrange(100):
> + fh = open_ums_device(host_ums_dev_node)
> + if not fh:
> + return
> + fh.close()
> + time.sleep(0.1)
> + raise Exception('UMS device did not disappear')
> +
> + at pytest.mark.buildconfigspec('cmd_usb_mass_storage')
> +def test_ums(u_boot_console, env__usb_dev_port, env__block_devs):
> + '''Test the "ums" command; the host system must be able to
> enumerate a UMS
> + device when "ums" is running, and this device must disappear
> when "ums" is
> + aborted.'''
> +
> + tgt_usb_ctlr = env__usb_dev_port['tgt_usb_ctlr']
> + host_ums_dev_node = env__usb_dev_port['host_ums_dev_node']
> +
> + # We're interested in testing USB device mode on each port, not
> the cross-
> + # product of that with each device. So, just pick the first
> entry in the
> + # device list here. We'll test each block device somewhere else.
> + tgt_dev_type = env__block_devs[0]['type']
> + tgt_dev_id = env__block_devs[0]['id']
> +
> + cmd = 'ums %s %s %s' % (tgt_usb_ctlr, tgt_dev_type, tgt_dev_id)
> + u_boot_console.run_command('ums 0 mmc 0', wait_for_prompt=False)
> + fh = wait_for_ums_device(host_ums_dev_node)
> + fh.read(4096)
> + fh.close()
> + u_boot_console.ctrlc()
> + wait_for_ums_device_gone(host_ums_dev_node)
Reviewed-by: Stephen Warren <swarren at wwwdotorg.org>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
More information about the U-Boot
mailing list