[U-Boot] [PATCHv2 1/3] armv8: fsl-layerscape: add i/d-cache enable function to enable_caches

Zhiqiang Hou Zhiqiang.Hou at freescale.com
Thu Jan 21 10:44:47 CET 2016


From: Hou Zhiqiang <Zhiqiang.Hou at freescale.com>

This function assume that the d-cache and MMU has been enabled earlier,
so it just created MMU table in main memory. But the assumption is not
always correct, for example, the early setup is done in EL3, while
enable_caches() is called when the PE has turned into another EL.

Define the function mmu_setup() for fsl-layerscape to cover the weak
one.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at freescale.com>
---
Tested on LS1043A RDB board

V2:
 - Replace patch [PATCH 1/3] ARMv8/layerscape: Add mmu_init API

 arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 6ea28ed..3147870 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -393,15 +393,21 @@ int arch_cpu_init(void)
 	return 0;
 }
 
+void mmu_setup(void)
+{
+	final_mmu_setup();
+}
+
 /*
- * This function is called from lib/board.c.
- * It recreates MMU table in main memory. MMU and d-cache are enabled earlier.
- * There is no need to disable d-cache for this operation.
+ * This function is called from common/board_r.c.
+ * It recreates MMU table in main memory.
  */
 void enable_caches(void)
 {
-	final_mmu_setup();
+	mmu_setup();
 	__asm_invalidate_tlb_all();
+	icache_enable();
+	dcache_enable();
 }
 #endif
 
-- 
2.1.0.27.g96db324



More information about the U-Boot mailing list