[U-Boot] [PATCH v9 02/49] dm: pinctrl: Add a function to parse PIN_CONFIG flags

[Simon Glass]

Add a function which produces a flags word from a few common PIN_CONFIG
settings. This is useful for simple pinctrl drivers that don't need to worry
about drive strength, etc.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v9: None
Changes in v2: None

 drivers/pinctrl/pinctrl-uclass.c | 12 ++++++++++++
 include/dm/pinctrl.h             | 13 +++++++++++++
 2 files changed, 25 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-uclass.c b/drivers/pinctrl/pinctrl-uclass.c
index c42b312..1acbfaf 100644
--- a/drivers/pinctrl/pinctrl-uclass.c
+++ b/drivers/pinctrl/pinctrl-uclass.c
@@ -15,6 +15,18 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+int pinctrl_decode_pin_config(const void *blob, int node)
+{
+	int flags = 0;
+
+	if (fdtdec_get_bool(blob, node, "bias-pull-up"))
+		flags |= 1 << PIN_CONFIG_BIAS_PULL_UP;
+	else if (fdtdec_get_bool(blob, node, "bias-pull-down"))
+		flags |= 1 << PIN_CONFIG_BIAS_PULL_DOWN;
+
+	return flags;
+}
+
 #if CONFIG_IS_ENABLED(PINCTRL_FULL)
 /**
  * pinctrl_config_one() - apply pinctrl settings for a single node
diff --git a/include/dm/pinctrl.h b/include/dm/pinctrl.h
index f6025f6..5cd4503 100644
--- a/include/dm/pinctrl.h
+++ b/include/dm/pinctrl.h
@@ -284,4 +284,17 @@ int pinctrl_request_noflags(struct udevice *dev, int func);
  */
 int pinctrl_get_periph_id(struct udevice *dev, struct udevice *periph);
 
+/**
+ * pinctrl_decode_pin_config() - decode pin configuration flags
+ *
+ * This decodes some of the PIN_CONFIG values into flags, with each value
+ * being (1 << pin_cfg). This does not support things with values like the
+ * slew rate.
+ *
+ * @blob:	Device tree blob
+ * @node:	Node containing the PIN_CONFIG values
+ * @return decoded flag value, or -ve on error
+ */
+int pinctrl_decode_pin_config(const void *blob, int node);
+
 #endif /* __PINCTRL_H */
-- 
2.7.0.rc3.207.g0ac5344