[U-Boot] [PATCH v2 16/37] rockchip: video: Add a display driver for rockchip eDP
Simon Glass
sjg at chromium.org
Fri Jan 22 03:45:04 CET 2016
Some Rockchip SoCs support embedded DisplayPort output. Add a display driver
for this so that these displays can be used on supported boards.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2:
- Update for new clk_get_by_index() API
arch/arm/include/asm/arch-rockchip/edp_rk3288.h | 636 +++++++++++++
drivers/video/rockchip/Makefile | 2 +-
drivers/video/rockchip/rk_edp.c | 1085 +++++++++++++++++++++++
3 files changed, 1722 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/include/asm/arch-rockchip/edp_rk3288.h
create mode 100644 drivers/video/rockchip/rk_edp.c
diff --git a/arch/arm/include/asm/arch-rockchip/edp_rk3288.h b/arch/arm/include/asm/arch-rockchip/edp_rk3288.h
new file mode 100644
index 0000000..a9e2761
--- /dev/null
+++ b/arch/arm/include/asm/arch-rockchip/edp_rk3288.h
@@ -0,0 +1,636 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Copyright 2014 Rockchip Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARCH_EDP_H
+#define _ASM_ARCH_EDP_H
+
+struct rk3288_edp {
+ u8 res0[0x10];
+ u32 dp_tx_version;
+ u8 res1[0x4];
+ u32 func_en_1;
+ u32 func_en_2;
+ u32 video_ctl_1;
+ u32 video_ctl_2;
+ u32 video_ctl_3;
+ u32 video_ctl_4;
+ u8 res2[0xc];
+ u32 video_ctl_8;
+ u8 res3[0x4];
+ u32 video_ctl_10;
+ u32 total_line_l;
+ u32 total_line_h;
+ u32 active_line_l;
+ u32 active_line_h;
+ u32 v_f_porch;
+ u32 vsync;
+ u32 v_b_porch;
+ u32 total_pixel_l;
+ u32 total_pixel_h;
+ u32 active_pixel_l;
+ u32 active_pixel_h;
+ u32 h_f_porch_l;
+ u32 h_f_porch_h;
+ u32 hsync_l;
+ u32 hysnc_h;
+ u32 h_b_porch_l;
+ u32 h_b_porch_h;
+ u32 vid_status;
+ u32 total_line_sta_l;
+ u32 total_line_sta_h;
+ u32 active_line_sta_l;
+ u32 active_line_sta_h;
+ u32 v_f_porch_sta;
+ u32 vsync_sta;
+ u32 v_b_porch_sta;
+ u32 total_pixel_sta_l;
+ u32 total_pixel_sta_h;
+ u32 active_pixel_sta_l;
+ u32 active_pixel_sta_h;
+ u32 h_f_porch_sta_l;
+ u32 h_f_porch_sta_h;
+ u32 hsync_sta_l;
+ u32 hsync_sta_h;
+ u32 h_b_porch_sta_l;
+ u32 h_b_porch__sta_h;
+ u8 res4[0x28];
+ u32 pll_reg_1;
+ u8 res5[4];
+ u32 ssc_reg;
+ u8 res6[0xc];
+ u32 tx_common;
+ u32 tx_common2;
+ u8 res7[0x4];
+ u32 dp_aux;
+ u32 dp_bias;
+ u32 dp_test;
+ u32 dp_pd;
+ u32 dp_reserv1;
+ u32 dp_reserv2;
+ u8 res8[0x224];
+ u32 lane_map;
+ u8 res9[0x14];
+ u32 analog_ctl_2;
+ u8 res10[0x48];
+ u32 int_state;
+ u32 common_int_sta_1;
+ u32 common_int_sta_2;
+ u32 common_int_sta_3;
+ u32 common_int_sta_4;
+ u32 spdif_biphase_int_sta;
+ u8 res11[0x4];
+ u32 dp_int_sta;
+ u32 common_int_mask_1;
+ u32 common_int_mask_2;
+ u32 common_int_mask_3;
+ u32 common_int_mask_4;
+ u8 res12[0x08];
+ u32 int_sta_mask;
+ u32 int_ctl;
+ u8 res13[0x200];
+ u32 sys_ctl_1;
+ u32 sys_ctl_2;
+ u32 sys_ctl_3;
+ u32 sys_ctl_4;
+ u32 dp_vid_ctl;
+ u8 res14[0x4];
+ u32 dp_aud_ctl;
+ u8 res15[0x24];
+ u32 pkt_send_ctl;
+ u8 res16[0x4];
+ u32 dp_hdcp_ctl;
+ u8 res17[0x34];
+ u32 link_bw_set;
+ u32 lane_count_set;
+ u32 dp_training_ptn_set;
+ u32 ln_link_trn_ctl[4];
+ u8 res18[0x4];
+ u32 dp_hw_link_training;
+ u8 res19[0x1c];
+ u32 dp_debug_ctl;
+ u32 hpd_deglitch_l;
+ u32 hpd_deglitch_h;
+ u8 res20[0x14];
+ u32 dp_link_debug_ctl;
+ u8 res21[0x1c];
+ u32 m_vid_0;
+ u32 m_vid_1;
+ u32 m_vid_2;
+ u32 n_vid_0;
+ u32 n_vid_1;
+ u32 n_vid_2;
+ u32 m_vid_mon;
+ u8 res22[0x14];
+ u32 dp_video_fifo_thrd;
+ u8 res23[0x8];
+ u32 dp_audio_margin;
+ u8 res24[0x20];
+ u32 dp_m_cal_ctl;
+ u32 m_vid_gen_filter_th;
+ u8 res25[0x10];
+ u32 m_aud_gen_filter_th;
+ u8 res26[0x4];
+ u32 aux_ch_sta;
+ u32 aux_err_num;
+ u32 aux_ch_defer_dtl;
+ u32 aux_rx_comm;
+ u32 buf_data_ctl;
+ u32 aux_ch_ctl_1;
+ u32 aux_addr_7_0;
+ u32 aux_addr_15_8;
+ u32 aux_addr_19_16;
+ u32 aux_ch_ctl_2;
+ u8 res27[0x18];
+ u32 buf_data[16];
+ u32 soc_general_ctl;
+ u8 res29[0x1e0];
+ u32 pll_reg_2;
+ u32 pll_reg_3;
+ u32 pll_reg_4;
+ u8 res30[0x10];
+ u32 pll_reg_5;
+};
+check_member(rk3288_edp, pll_reg_5, 0xa00);
+
+/* func_en_1 */
+#define VID_CAP_FUNC_EN_N (0x1 << 6)
+#define VID_FIFO_FUNC_EN_N (0x1 << 5)
+#define AUD_FIFO_FUNC_EN_N (0x1 << 4)
+#define AUD_FUNC_EN_N (0x1 << 3)
+#define HDCP_FUNC_EN_N (0x1 << 2)
+#define SW_FUNC_EN_N (0x1 << 0)
+
+/* func_en_2 */
+#define SSC_FUNC_EN_N (0x1 << 7)
+#define AUX_FUNC_EN_N (0x1 << 2)
+#define SERDES_FIFO_FUNC_EN_N (0x1 << 1)
+#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0)
+
+/* video_ctl_1 */
+#define VIDEO_EN (0x1 << 7)
+#define VIDEO_MUTE (0x1 << 6)
+
+/* video_ctl_2 */
+#define IN_D_RANGE_MASK (0x1 << 7)
+#define IN_D_RANGE_SHIFT (7)
+#define IN_D_RANGE_CEA (0x1 << 7)
+#define IN_D_RANGE_VESA (0x0 << 7)
+#define IN_BPC_MASK (0x7 << 4)
+#define IN_BPC_SHIFT (4)
+#define IN_BPC_12_BITS (0x3 << 4)
+#define IN_BPC_10_BITS (0x2 << 4)
+#define IN_BPC_8_BITS (0x1 << 4)
+#define IN_BPC_6_BITS (0x0 << 4)
+#define IN_COLOR_F_MASK (0x3 << 0)
+#define IN_COLOR_F_SHIFT (0)
+#define IN_COLOR_F_YCBCR444 (0x2 << 0)
+#define IN_COLOR_F_YCBCR422 (0x1 << 0)
+#define IN_COLOR_F_RGB (0x0 << 0)
+
+/* video_ctl_3 */
+#define IN_YC_COEFFI_MASK (0x1 << 7)
+#define IN_YC_COEFFI_SHIFT (7)
+#define IN_YC_COEFFI_ITU709 (0x1 << 7)
+#define IN_YC_COEFFI_ITU601 (0x0 << 7)
+#define VID_CHK_UPDATE_TYPE_MASK (0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_SHIFT (4)
+#define VID_CHK_UPDATE_TYPE_1 (0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_0 (0x0 << 4)
+
+/* video_ctl_4 */
+#define BIST_EN (0x1 << 3)
+#define BIST_WH_64 (0x1 << 2)
+#define BIST_WH_32 (0x0 << 2)
+#define BIST_TYPE_COLR_BAR (0x0 << 0)
+#define BIST_TYPE_GRAY_BAR (0x1 << 0)
+#define BIST_TYPE_MOBILE_BAR (0x2 << 0)
+
+/* video_ctl_8 */
+#define VID_HRES_TH(x) (((x) & 0xf) << 4)
+#define VID_VRES_TH(x) (((x) & 0xf) << 0)
+
+/* video_ctl_10 */
+#define F_SEL (0x1 << 4)
+#define INTERACE_SCAN_CFG (0x1 << 2)
+#define INTERACD_SCAN_CFG_OFFSET 2
+#define VSYNC_POLARITY_CFG (0x1 << 1)
+#define VSYNC_POLARITY_CFG_OFFSET 1
+#define HSYNC_POLARITY_CFG (0x1 << 0)
+#define HSYNC_POLARITY_CFG_OFFSET 0
+
+/* dp_pd */
+#define PD_INC_BG (0x1 << 7)
+#define PD_EXP_BG (0x1 << 6)
+#define PD_AUX (0x1 << 5)
+#define PD_PLL (0x1 << 4)
+#define PD_CH3 (0x1 << 3)
+#define PD_CH2 (0x1 << 2)
+#define PD_CH1 (0x1 << 1)
+#define PD_CH0 (0x1 << 0)
+
+/* pll_reg_1 */
+#define REF_CLK_24M (0x1 << 1)
+#define REF_CLK_27M (0x0 << 1)
+
+/* line_map */
+#define LANE3_MAP_LOGIC_LANE_0 (0x0 << 6)
+#define LANE3_MAP_LOGIC_LANE_1 (0x1 << 6)
+#define LANE3_MAP_LOGIC_LANE_2 (0x2 << 6)
+#define LANE3_MAP_LOGIC_LANE_3 (0x3 << 6)
+#define LANE2_MAP_LOGIC_LANE_0 (0x0 << 4)
+#define LANE2_MAP_LOGIC_LANE_1 (0x1 << 4)
+#define LANE2_MAP_LOGIC_LANE_2 (0x2 << 4)
+#define LANE2_MAP_LOGIC_LANE_3 (0x3 << 4)
+#define LANE1_MAP_LOGIC_LANE_0 (0x0 << 2)
+#define LANE1_MAP_LOGIC_LANE_1 (0x1 << 2)
+#define LANE1_MAP_LOGIC_LANE_2 (0x2 << 2)
+#define LANE1_MAP_LOGIC_LANE_3 (0x3 << 2)
+#define LANE0_MAP_LOGIC_LANE_0 (0x0 << 0)
+#define LANE0_MAP_LOGIC_LANE_1 (0x1 << 0)
+#define LANE0_MAP_LOGIC_LANE_2 (0x2 << 0)
+#define LANE0_MAP_LOGIC_LANE_3 (0x3 << 0)
+
+/* analog_ctl_2 */
+#define SEL_24M (0x1 << 3)
+
+/* common_int_sta_1 */
+#define VSYNC_DET (0x1 << 7)
+#define PLL_LOCK_CHG (0x1 << 6)
+#define SPDIF_ERR (0x1 << 5)
+#define SPDIF_UNSTBL (0x1 << 4)
+#define VID_FORMAT_CHG (0x1 << 3)
+#define AUD_CLK_CHG (0x1 << 2)
+#define VID_CLK_CHG (0x1 << 1)
+#define SW_INT (0x1 << 0)
+
+/* common_int_sta_2 */
+#define ENC_EN_CHG (0x1 << 6)
+#define HW_BKSV_RDY (0x1 << 3)
+#define HW_SHA_DONE (0x1 << 2)
+#define HW_AUTH_STATE_CHG (0x1 << 1)
+#define HW_AUTH_DONE (0x1 << 0)
+
+/* common_int_sta_3 */
+#define AFIFO_UNDER (0x1 << 7)
+#define AFIFO_OVER (0x1 << 6)
+#define R0_CHK_FLAG (0x1 << 5)
+
+/* common_int_sta_4 */
+#define PSR_ACTIVE (0x1 << 7)
+#define PSR_INACTIVE (0x1 << 6)
+#define SPDIF_BI_PHASE_ERR (0x1 << 5)
+#define HOTPLUG_CHG (0x1 << 2)
+#define HPD_LOST (0x1 << 1)
+#define PLUG (0x1 << 0)
+
+/* dp_int_sta */
+#define INT_HPD (0x1 << 6)
+#define HW_LT_DONE (0x1 << 5)
+#define SINK_LOST (0x1 << 3)
+#define LINK_LOST (0x1 << 2)
+#define RPLY_RECEIV (0x1 << 1)
+#define AUX_ERR (0x1 << 0)
+
+/* int_ctl */
+#define SOFT_INT_CTRL (0x1 << 2)
+#define INT_POL (0x1 << 0)
+
+/* sys_ctl_1 */
+#define DET_STA (0x1 << 2)
+#define FORCE_DET (0x1 << 1)
+#define DET_CTRL (0x1 << 0)
+
+/* sys_ctl_2 */
+#define CHA_CRI(x) (((x) & 0xf) << 4)
+#define CHA_STA (0x1 << 2)
+#define FORCE_CHA (0x1 << 1)
+#define CHA_CTRL (0x1 << 0)
+
+/* sys_ctl_3 */
+#define HPD_STATUS (0x1 << 6)
+#define F_HPD (0x1 << 5)
+#define HPD_CTRL (0x1 << 4)
+#define HDCP_RDY (0x1 << 3)
+#define STRM_VALID (0x1 << 2)
+#define F_VALID (0x1 << 1)
+#define VALID_CTRL (0x1 << 0)
+
+/* sys_ctl_4 */
+#define FIX_M_AUD (0x1 << 4)
+#define ENHANCED (0x1 << 3)
+#define FIX_M_VID (0x1 << 2)
+#define M_VID_UPDATE_CTRL (0x3 << 0)
+
+/* pll_reg_2 */
+#define LDO_OUTPUT_V_SEL_145 (2 << 6)
+#define KVCO_DEFALUT (1 << 4)
+#define CHG_PUMP_CUR_SEL_5US (1 << 2)
+#define V2L_CUR_SEL_1MA (1 << 0)
+
+/* pll_reg_3 */
+#define LOCK_DET_CNT_SEL_256 (2 << 5)
+#define LOOP_FILTER_RESET (0 << 4)
+#define PALL_SSC_RESET (0 << 3)
+#define LOCK_DET_BYPASS (0 << 2)
+#define PLL_LOCK_DET_MODE (0 << 1)
+#define PLL_LOCK_DET_FORCE (0 << 0)
+
+/* pll_reg_5 */
+#define REGULATOR_V_SEL_950MV (2 << 4)
+#define STANDBY_CUR_SEL (0 << 3)
+#define CHG_PUMP_INOUT_CTRL_1200MV (1 << 1)
+#define CHG_PUMP_INPUT_CTRL_OP (0 << 0)
+
+/* ssc_reg */
+#define SSC_OFFSET (0 << 6)
+#define SSC_MODE (1 << 4)
+#define SSC_DEPTH (9 << 0)
+
+/* tx_common */
+#define TX_SWING_PRE_EMP_MODE (1 << 7)
+#define PRE_DRIVER_PW_CTRL1 (0 << 5)
+#define LP_MODE_CLK_REGULATOR (0 << 4)
+#define RESISTOR_MSB_CTRL (0 << 3)
+#define RESISTOR_CTRL (7 << 0)
+
+/* dp_aux */
+#define DP_AUX_COMMON_MODE (0 << 4)
+#define DP_AUX_EN (0 << 3)
+#define AUX_TERM_50OHM (3 << 0)
+
+/* dp_bias */
+#define DP_BG_OUT_SEL (4 << 4)
+#define DP_DB_CUR_CTRL (0 << 3)
+#define DP_BG_SEL (1 << 2)
+#define DP_RESISTOR_TUNE_BG (2 << 0)
+
+/* dp_reserv2 */
+#define CH1_CH3_SWING_EMP_CTRL (5 << 4)
+#define CH0_CH2_SWING_EMP_CTRL (5 << 0)
+
+/* dp_training_ptn_set */
+#define SCRAMBLING_DISABLE (0x1 << 5)
+#define SCRAMBLING_ENABLE (0x0 << 5)
+#define LINK_QUAL_PATTERN_SET_MASK (0x7 << 2)
+#define LINK_QUAL_PATTERN_SET_HBR2 (0x5 << 2)
+#define LINK_QUAL_PATTERN_SET_80BIT (0x4 << 2)
+#define LINK_QUAL_PATTERN_SET_PRBS7 (0x3 << 2)
+#define LINK_QUAL_PATTERN_SET_D10_2 (0x1 << 2)
+#define LINK_QUAL_PATTERN_SET_DISABLE (0x0 << 2)
+#define SW_TRAINING_PATTERN_SET_MASK (0x3 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN2 (0x2 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN1 (0x1 << 0)
+#define SW_TRAINING_PATTERN_SET_DISABLE (0x0 << 0)
+
+/* dp_hw_link_training_ctl */
+#define HW_LT_ERR_CODE_MASK 0x70
+#define HW_LT_ERR_CODE_SHIFT 4
+#define HW_LT_EN (0x1 << 0)
+
+/* dp_debug_ctl */
+#define PLL_LOCK (0x1 << 4)
+#define F_PLL_LOCK (0x1 << 3)
+#define PLL_LOCK_CTRL (0x1 << 2)
+#define POLL_EN (0x1 << 1)
+#define PN_INV (0x1 << 0)
+
+/* aux_ch_sta */
+#define AUX_BUSY (0x1 << 4)
+#define AUX_STATUS_MASK (0xf << 0)
+
+/* aux_ch_defer_ctl */
+#define DEFER_CTRL_EN (0x1 << 7)
+#define DEFER_COUNT(x) (((x) & 0x7f) << 0)
+
+/* aux_rx_comm */
+#define AUX_RX_COMM_I2C_DEFER (0x2 << 2)
+#define AUX_RX_COMM_AUX_DEFER (0x2 << 0)
+
+/* buffer_data_ctl */
+#define BUF_CLR (0x1 << 7)
+#define BUF_HAVE_DATA (0x1 << 4)
+#define BUF_DATA_COUNT(x) (((x) & 0xf) << 0)
+
+/* aux_ch_ctl_1 */
+#define AUX_LENGTH(x) (((x - 1) & 0xf) << 4)
+#define AUX_TX_COMM_MASK (0xf << 0)
+#define AUX_TX_COMM_DP_TRANSACTION (0x1 << 3)
+#define AUX_TX_COMM_I2C_TRANSACTION (0x0 << 3)
+#define AUX_TX_COMM_MOT (0x1 << 2)
+#define AUX_TX_COMM_WRITE (0x0 << 0)
+#define AUX_TX_COMM_READ (0x1 << 0)
+
+/* aux_ch_ctl_2 */
+#define PD_AUX_IDLE (0x1 << 3)
+#define ADDR_ONLY (0x1 << 1)
+#define AUX_EN (0x1 << 0)
+
+/* tx_sw_reset */
+#define RST_DP_TX (0x1 << 0)
+
+/* analog_ctl_1 */
+#define TX_TERMINAL_CTRL_50_OHM (0x1 << 4)
+
+/* analog_ctl_3 */
+#define DRIVE_DVDD_BIT_1_0625V (0x4 << 5)
+#define VCO_BIT_600_MICRO (0x5 << 0)
+
+/* pll_filter_ctl_1 */
+#define PD_RING_OSC (0x1 << 6)
+#define AUX_TERMINAL_CTRL_37_5_OHM (0x0 << 4)
+#define AUX_TERMINAL_CTRL_45_OHM (0x1 << 4)
+#define AUX_TERMINAL_CTRL_50_OHM (0x2 << 4)
+#define AUX_TERMINAL_CTRL_65_OHM (0x3 << 4)
+#define TX_CUR1_2X (0x1 << 2)
+#define TX_CUR_16_MA (0x3 << 0)
+
+/* Definition for DPCD Register */
+#define DPCD_DPCD_REV (0x0000)
+#define DPCD_MAX_LINK_RATE (0x0001)
+#define DPCD_MAX_LANE_COUNT (0x0002)
+#define DP_MAX_LANE_COUNT_MASK 0x1f
+#define DP_TPS3_SUPPORTED (1 << 6)
+#define DP_ENHANCED_FRAME_CAP (1 << 7)
+
+#define DPCD_LINK_BW_SET (0x0100)
+#define DPCD_LANE_COUNT_SET (0x0101)
+
+#define DPCD_TRAINING_PATTERN_SET (0x0102)
+#define DP_TRAINING_PATTERN_DISABLE 0
+#define DP_TRAINING_PATTERN_1 1
+#define DP_TRAINING_PATTERN_2 2
+#define DP_TRAINING_PATTERN_3 3
+#define DP_TRAINING_PATTERN_MASK 0x3
+
+#define DPCD_TRAINING_LANE0_SET (0x0103)
+#define DP_TRAIN_VOLTAGE_SWING_MASK 0x3
+#define DP_TRAIN_VOLTAGE_SWING_SHIFT 0
+#define DP_TRAIN_MAX_SWING_REACHED (1 << 2)
+#define DP_TRAIN_VOLTAGE_SWING_400 (0 << 0)
+#define DP_TRAIN_VOLTAGE_SWING_600 (1 << 0)
+#define DP_TRAIN_VOLTAGE_SWING_800 (2 << 0)
+#define DP_TRAIN_VOLTAGE_SWING_1200 (3 << 0)
+
+#define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3)
+#define DP_TRAIN_PRE_EMPHASIS_0 (0 << 3)
+#define DP_TRAIN_PRE_EMPHASIS_3_5 (1 << 3)
+#define DP_TRAIN_PRE_EMPHASIS_6 (2 << 3)
+#define DP_TRAIN_PRE_EMPHASIS_9_5 (3 << 3)
+
+#define DP_TRAIN_PRE_EMPHASIS_SHIFT 3
+#define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5)
+
+#define DPCD_LANE0_1_STATUS (0x0202)
+#define DPCD_LANE2_3_STATUS (0x0203)
+#define DP_LANE_CR_DONE (1 << 0)
+#define DP_LANE_CHANNEL_EQ_DONE (1 << 1)
+#define DP_LANE_SYMBOL_LOCKED (1 << 2)
+#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE |\
+ DP_LANE_CHANNEL_EQ_DONE |\
+ DP_LANE_SYMBOL_LOCKED)
+
+#define DPCD_LANE_ALIGN_STATUS_UPDATED (0x0204)
+#define DP_INTERLANE_ALIGN_DONE (1 << 0)
+#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6)
+#define DP_LINK_STATUS_UPDATED (1 << 7)
+
+#define DPCD_ADJUST_REQUEST_LANE0_1 (0x0206)
+#define DPCD_ADJUST_REQUEST_LANE2_3 (0x0207)
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6
+
+#define DPCD_TEST_REQUEST (0x0218)
+#define DPCD_TEST_RESPONSE (0x0260)
+#define DPCD_TEST_EDID_CHECKSUM (0x0261)
+#define DPCD_LINK_POWER_STATE (0x0600)
+#define DP_SET_POWER_D0 0x1
+#define DP_SET_POWER_D3 0x2
+#define DP_SET_POWER_MASK 0x3
+
+#define AUX_ADDR_7_0(x) (((x) >> 0) & 0xff)
+#define AUX_ADDR_15_8(x) (((x) >> 8) & 0xff)
+#define AUX_ADDR_19_16(x) (((x) >> 16) & 0x0f)
+
+#define STREAM_ON_TIMEOUT 100
+#define PLL_LOCK_TIMEOUT 10
+#define DP_INIT_TRIES 10
+
+#define EDID_ADDR 0x50
+#define EDID_LENGTH 0x80
+#define EDID_HEADER 0x00
+#define EDID_EXTENSION_FLAG 0x7e
+
+
+enum dpcd_request {
+ DPCD_READ,
+ DPCD_WRITE,
+};
+
+enum dp_irq_type {
+ DP_IRQ_TYPE_HP_CABLE_IN,
+ DP_IRQ_TYPE_HP_CABLE_OUT,
+ DP_IRQ_TYPE_HP_CHANGE,
+ DP_IRQ_TYPE_UNKNOWN,
+};
+
+enum color_coefficient {
+ COLOR_YCBCR601,
+ COLOR_YCBCR709
+};
+
+enum dynamic_range {
+ VESA,
+ CEA
+};
+
+enum clock_recovery_m_value_type {
+ CALCULATED_M,
+ REGISTER_M
+};
+
+enum video_timing_recognition_type {
+ VIDEO_TIMING_FROM_CAPTURE,
+ VIDEO_TIMING_FROM_REGISTER
+};
+
+enum pattern_set {
+ PRBS7,
+ D10_2,
+ TRAINING_PTN1,
+ TRAINING_PTN2,
+ DP_NONE
+};
+
+enum color_space {
+ CS_RGB,
+ CS_YCBCR422,
+ CS_YCBCR444
+};
+
+enum color_depth {
+ COLOR_6,
+ COLOR_8,
+ COLOR_10,
+ COLOR_12
+};
+
+enum link_rate_type {
+ LINK_RATE_1_62GBPS = 0x06,
+ LINK_RATE_2_70GBPS = 0x0a
+};
+
+enum link_lane_count_type {
+ LANE_CNT1 = 1,
+ LANE_CNT2 = 2,
+ LANE_CNT4 = 4
+};
+
+enum link_training_state {
+ LT_START,
+ LT_CLK_RECOVERY,
+ LT_EQ_TRAINING,
+ FINISHED,
+ FAILED
+};
+
+enum voltage_swing_level {
+ VOLTAGE_LEVEL_0,
+ VOLTAGE_LEVEL_1,
+ VOLTAGE_LEVEL_2,
+ VOLTAGE_LEVEL_3,
+};
+
+enum pre_emphasis_level {
+ PRE_EMPHASIS_LEVEL_0,
+ PRE_EMPHASIS_LEVEL_1,
+ PRE_EMPHASIS_LEVEL_2,
+ PRE_EMPHASIS_LEVEL_3,
+};
+
+enum analog_power_block {
+ AUX_BLOCK,
+ CH0_BLOCK,
+ CH1_BLOCK,
+ CH2_BLOCK,
+ CH3_BLOCK,
+ ANALOG_TOTAL,
+ POWER_ALL
+};
+
+struct link_train {
+ unsigned char revision;
+ u8 link_rate;
+ u8 lane_count;
+};
+
+#endif
diff --git a/drivers/video/rockchip/Makefile b/drivers/video/rockchip/Makefile
index 361fcb5..5566719 100644
--- a/drivers/video/rockchip/Makefile
+++ b/drivers/video/rockchip/Makefile
@@ -5,4 +5,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += rk_hdmi.o
+obj-y += rk_edp.o rk_hdmi.o
diff --git a/drivers/video/rockchip/rk_edp.c b/drivers/video/rockchip/rk_edp.c
new file mode 100644
index 0000000..124ddf6
--- /dev/null
+++ b/drivers/video/rockchip/rk_edp.c
@@ -0,0 +1,1085 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Copyright 2014 Rockchip Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <display.h>
+#include <dm.h>
+#include <edid.h>
+#include <panel.h>
+#include <regmap.h>
+#include <syscon.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/edp_rk3288.h>
+#include <asm/arch/grf_rk3288.h>
+#include <dt-bindings/clock/rk3288-cru.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MAX_CR_LOOP 5
+#define MAX_EQ_LOOP 5
+#define DP_LINK_STATUS_SIZE 6
+
+static const char * const voltage_names[] = {
+ "0.4V", "0.6V", "0.8V", "1.2V"
+};
+static const char * const pre_emph_names[] = {
+ "0dB", "3.5dB", "6dB", "9.5dB"
+};
+
+#define DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_1200
+#define DP_PRE_EMPHASIS_MAX DP_TRAIN_PRE_EMPHASIS_9_5
+
+struct rk_edp_priv {
+ struct rk3288_edp *regs;
+ struct rk3288_grf *grf;
+ struct udevice *panel;
+ struct link_train link_train;
+ u8 train_set[4];
+};
+
+static void rk_edp_init_refclk(struct rk3288_edp *regs)
+{
+ writel(SEL_24M, ®s->analog_ctl_2);
+ writel(REF_CLK_24M, ®s->pll_reg_1);
+
+ writel(LDO_OUTPUT_V_SEL_145 | KVCO_DEFALUT | CHG_PUMP_CUR_SEL_5US |
+ V2L_CUR_SEL_1MA, ®s->pll_reg_2);
+
+ writel(LOCK_DET_CNT_SEL_256 | LOOP_FILTER_RESET | PALL_SSC_RESET |
+ LOCK_DET_BYPASS | PLL_LOCK_DET_MODE | PLL_LOCK_DET_FORCE,
+ ®s->pll_reg_3);
+
+ writel(REGULATOR_V_SEL_950MV | STANDBY_CUR_SEL |
+ CHG_PUMP_INOUT_CTRL_1200MV | CHG_PUMP_INPUT_CTRL_OP,
+ ®s->pll_reg_5);
+
+ writel(SSC_OFFSET | SSC_MODE | SSC_DEPTH, ®s->ssc_reg);
+
+ writel(TX_SWING_PRE_EMP_MODE | PRE_DRIVER_PW_CTRL1 |
+ LP_MODE_CLK_REGULATOR | RESISTOR_MSB_CTRL | RESISTOR_CTRL,
+ ®s->tx_common);
+
+ writel(DP_AUX_COMMON_MODE | DP_AUX_EN | AUX_TERM_50OHM,
+ ®s->dp_aux);
+
+ writel(DP_BG_OUT_SEL | DP_DB_CUR_CTRL | DP_BG_SEL | DP_RESISTOR_TUNE_BG,
+ ®s->dp_bias);
+
+ writel(CH1_CH3_SWING_EMP_CTRL | CH0_CH2_SWING_EMP_CTRL,
+ ®s->dp_reserv2);
+}
+
+static void rk_edp_init_interrupt(struct rk3288_edp *regs)
+{
+ /* Set interrupt pin assertion polarity as high */
+ writel(INT_POL, ®s->int_ctl);
+
+ /* Clear pending registers */
+ writel(0xff, ®s->common_int_sta_1);
+ writel(0x4f, ®s->common_int_sta_2);
+ writel(0xff, ®s->common_int_sta_3);
+ writel(0x27, ®s->common_int_sta_4);
+ writel(0x7f, ®s->dp_int_sta);
+
+ /* 0:mask,1: unmask */
+ writel(0x00, ®s->common_int_mask_1);
+ writel(0x00, ®s->common_int_mask_2);
+ writel(0x00, ®s->common_int_mask_3);
+ writel(0x00, ®s->common_int_mask_4);
+ writel(0x00, ®s->int_sta_mask);
+}
+
+static void rk_edp_enable_sw_function(struct rk3288_edp *regs)
+{
+ clrbits_le32(®s->func_en_1, SW_FUNC_EN_N);
+}
+
+static bool rk_edp_get_pll_locked(struct rk3288_edp *regs)
+{
+ u32 val;
+
+ val = readl(®s->dp_debug_ctl);
+
+ return val & PLL_LOCK;
+}
+
+static int rk_edp_init_analog_func(struct rk3288_edp *regs)
+{
+ ulong start;
+
+ writel(0x00, ®s->dp_pd);
+ writel(PLL_LOCK_CHG, ®s->common_int_sta_1);
+
+ clrbits_le32(®s->dp_debug_ctl, F_PLL_LOCK | PLL_LOCK_CTRL);
+
+ start = get_timer(0);
+ while (!rk_edp_get_pll_locked(regs)) {
+ if (get_timer(start) > PLL_LOCK_TIMEOUT) {
+ printf("%s: PLL is not locked\n", __func__);
+ return -ETIMEDOUT;
+ }
+ }
+
+ /* Enable Serdes FIFO function and Link symbol clock domain module */
+ clrbits_le32(®s->func_en_2, SERDES_FIFO_FUNC_EN_N |
+ LS_CLK_DOMAIN_FUNC_EN_N | AUX_FUNC_EN_N |
+ SSC_FUNC_EN_N);
+
+ return 0;
+}
+
+static void rk_edp_init_aux(struct rk3288_edp *regs)
+{
+ /* Clear inerrupts related to AUX channel */
+ writel(AUX_FUNC_EN_N, ®s->dp_int_sta);
+
+ /* Disable AUX channel module */
+ setbits_le32(®s->func_en_2, AUX_FUNC_EN_N);
+
+ /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
+ writel(DEFER_CTRL_EN | DEFER_COUNT(1), ®s->aux_ch_defer_dtl);
+
+ /* Enable AUX channel module */
+ clrbits_le32(®s->func_en_2, AUX_FUNC_EN_N);
+}
+
+static int rk_edp_aux_enable(struct rk3288_edp *regs)
+{
+ ulong start;
+
+ setbits_le32(®s->aux_ch_ctl_2, AUX_EN);
+ start = get_timer(0);
+ do {
+ if (!(readl(®s->aux_ch_ctl_2) & AUX_EN))
+ return 0;
+ } while (get_timer(start) < 20);
+
+ return -ETIMEDOUT;
+}
+
+static int rk_edp_is_aux_reply(struct rk3288_edp *regs)
+{
+ ulong start;
+
+ start = get_timer(0);
+ while (!(readl(®s->dp_int_sta) & RPLY_RECEIV)) {
+ if (get_timer(start) > 10)
+ return -ETIMEDOUT;
+ }
+
+ writel(RPLY_RECEIV, ®s->dp_int_sta);
+
+ return 0;
+}
+
+static int rk_edp_start_aux_transaction(struct rk3288_edp *regs)
+{
+ int val, ret;
+
+ /* Enable AUX CH operation */
+ ret = rk_edp_aux_enable(regs);
+ if (ret) {
+ debug("AUX CH enable timeout!\n");
+ return ret;
+ }
+
+ /* Is AUX CH command reply received? */
+ if (rk_edp_is_aux_reply(regs)) {
+ debug("AUX CH command reply failed!\n");
+ return ret;
+ }
+
+ /* Clear interrupt source for AUX CH access error */
+ val = readl(®s->dp_int_sta);
+ if (val & AUX_ERR) {
+ writel(AUX_ERR, ®s->dp_int_sta);
+ return -EIO;
+ }
+
+ /* Check AUX CH error access status */
+ val = readl(®s->dp_int_sta);
+ if (val & AUX_STATUS_MASK) {
+ debug("AUX CH error happens: %d\n\n", val & AUX_STATUS_MASK);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int rk_edp_dpcd_transfer(struct rk3288_edp *regs,
+ unsigned int val_addr, u8 *in_data,
+ unsigned int length,
+ enum dpcd_request request)
+{
+ int val;
+ int i, try_times;
+ u8 *data;
+ int ret = 0;
+ u32 len = 0;
+
+ while (length) {
+ len = min(length, 16U);
+ for (try_times = 0; try_times < 10; try_times++) {
+ data = in_data;
+ /* Clear AUX CH data buffer */
+ writel(BUF_CLR, ®s->buf_data_ctl);
+
+ /* Select DPCD device address */
+ writel(AUX_ADDR_7_0(val_addr), ®s->aux_addr_7_0);
+ writel(AUX_ADDR_15_8(val_addr), ®s->aux_addr_15_8);
+ writel(AUX_ADDR_19_16(val_addr), ®s->aux_addr_19_16);
+
+ /*
+ * Set DisplayPort transaction and read 1 byte
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ if (request == DPCD_WRITE) {
+ val = AUX_LENGTH(len) |
+ AUX_TX_COMM_DP_TRANSACTION |
+ AUX_TX_COMM_WRITE;
+ for (i = 0; i < len; i++)
+ writel(*data++, ®s->buf_data[i]);
+ } else
+ val = AUX_LENGTH(len) |
+ AUX_TX_COMM_DP_TRANSACTION |
+ AUX_TX_COMM_READ;
+
+ writel(val, ®s->aux_ch_ctl_1);
+
+ /* Start AUX transaction */
+ ret = rk_edp_start_aux_transaction(regs);
+ if (ret == 0)
+ break;
+ else
+ printf("read dpcd Aux Transaction fail!\n");
+ }
+
+ if (ret)
+ return ret;
+
+ if (request == DPCD_READ) {
+ for (i = 0; i < len; i++)
+ *data++ = (u8)readl(®s->buf_data[i]);
+ }
+
+ length -= len;
+ val_addr += len;
+ in_data += len;
+ }
+
+ return 0;
+}
+
+static int rk_edp_dpcd_read(struct rk3288_edp *regs, u32 addr, u8 *values,
+ size_t size)
+{
+ return rk_edp_dpcd_transfer(regs, addr, values, size, DPCD_READ);
+}
+
+static int rk_edp_dpcd_write(struct rk3288_edp *regs, u32 addr, u8 *values,
+ size_t size)
+{
+ return rk_edp_dpcd_transfer(regs, addr, values, size, DPCD_WRITE);
+}
+
+
+static int rk_edp_link_power_up(struct rk_edp_priv *edp)
+{
+ u8 value;
+ int ret;
+
+ /* DP_SET_POWER register is only available on DPCD v1.1 and later */
+ if (edp->link_train.revision < 0x11)
+ return 0;
+
+ ret = rk_edp_dpcd_read(edp->regs, DPCD_LINK_POWER_STATE, &value, 1);
+ if (ret)
+ return ret;
+
+ value &= ~DP_SET_POWER_MASK;
+ value |= DP_SET_POWER_D0;
+
+ ret = rk_edp_dpcd_write(edp->regs, DPCD_LINK_POWER_STATE, &value, 1);
+ if (ret)
+ return ret;
+
+ /*
+ * According to the DP 1.1 specification, a "Sink Device must exit the
+ * power saving state within 1 ms" (Section 2.5.3.1, Table 5-52, "Sink
+ * Control Field" (register 0x600).
+ */
+ mdelay(1);
+
+ return 0;
+}
+
+static int rk_edp_link_configure(struct rk_edp_priv *edp)
+{
+ u8 values[2];
+
+ values[0] = edp->link_train.link_rate;
+ values[1] = edp->link_train.lane_count;
+
+ return rk_edp_dpcd_write(edp->regs, DPCD_LINK_BW_SET, values,
+ sizeof(values));
+}
+
+static void rk_edp_set_link_training(struct rk_edp_priv *edp,
+ const u8 *training_values)
+{
+ int i;
+
+ for (i = 0; i < edp->link_train.lane_count; i++)
+ writel(training_values[i], &edp->regs->ln_link_trn_ctl[i]);
+}
+
+static u8 edp_link_status(const u8 *link_status, int r)
+{
+ return link_status[r - DPCD_LANE0_1_STATUS];
+}
+
+static int rk_edp_dpcd_read_link_status(struct rk_edp_priv *edp,
+ u8 *link_status)
+{
+ return rk_edp_dpcd_read(edp->regs, DPCD_LANE0_1_STATUS, link_status,
+ DP_LINK_STATUS_SIZE);
+}
+
+static u8 edp_get_lane_status(const u8 *link_status, int lane)
+{
+ int i = DPCD_LANE0_1_STATUS + (lane >> 1);
+ int s = (lane & 1) * 4;
+ u8 l = edp_link_status(link_status, i);
+
+ return (l >> s) & 0xf;
+}
+
+static int rk_edp_clock_recovery(const u8 *link_status, int lane_count)
+{
+ int lane;
+ u8 lane_status;
+
+ for (lane = 0; lane < lane_count; lane++) {
+ lane_status = edp_get_lane_status(link_status, lane);
+ if ((lane_status & DP_LANE_CR_DONE) == 0)
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int rk_edp_channel_eq(const u8 *link_status, int lane_count)
+{
+ u8 lane_align;
+ u8 lane_status;
+ int lane;
+
+ lane_align = edp_link_status(link_status,
+ DPCD_LANE_ALIGN_STATUS_UPDATED);
+ if (!(lane_align & DP_INTERLANE_ALIGN_DONE))
+ return -EIO;
+ for (lane = 0; lane < lane_count; lane++) {
+ lane_status = edp_get_lane_status(link_status, lane);
+ if ((lane_status & DP_CHANNEL_EQ_BITS) != DP_CHANNEL_EQ_BITS)
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static uint rk_edp_get_adjust_request_voltage(const u8 *link_status, int lane)
+{
+ int i = DPCD_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+ int s = ((lane & 1) ?
+ DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
+ DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
+ u8 l = edp_link_status(link_status, i);
+
+ return ((l >> s) & 0x3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
+}
+
+static uint rk_edp_get_adjust_request_pre_emphasis(const u8 *link_status,
+ int lane)
+{
+ int i = DPCD_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+ int s = ((lane & 1) ?
+ DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
+ DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
+ u8 l = edp_link_status(link_status, i);
+
+ return ((l >> s) & 0x3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
+}
+
+static void edp_get_adjust_train(const u8 *link_status, int lane_count,
+ u8 train_set[])
+{
+ uint v = 0;
+ uint p = 0;
+ int lane;
+
+ for (lane = 0; lane < lane_count; lane++) {
+ uint this_v, this_p;
+
+ this_v = rk_edp_get_adjust_request_voltage(link_status, lane);
+ this_p = rk_edp_get_adjust_request_pre_emphasis(link_status,
+ lane);
+
+ debug("requested signal parameters: lane %d voltage %s pre_emph %s\n",
+ lane,
+ voltage_names[this_v >> DP_TRAIN_VOLTAGE_SWING_SHIFT],
+ pre_emph_names[this_p >> DP_TRAIN_PRE_EMPHASIS_SHIFT]);
+
+ if (this_v > v)
+ v = this_v;
+ if (this_p > p)
+ p = this_p;
+ }
+
+ if (v >= DP_VOLTAGE_MAX)
+ v |= DP_TRAIN_MAX_SWING_REACHED;
+
+ if (p >= DP_PRE_EMPHASIS_MAX)
+ p |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+
+ debug("using signal parameters: voltage %s pre_emph %s\n",
+ voltage_names[(v & DP_TRAIN_VOLTAGE_SWING_MASK)
+ >> DP_TRAIN_VOLTAGE_SWING_SHIFT],
+ pre_emph_names[(p & DP_TRAIN_PRE_EMPHASIS_MASK)
+ >> DP_TRAIN_PRE_EMPHASIS_SHIFT]);
+
+ for (lane = 0; lane < 4; lane++)
+ train_set[lane] = v | p;
+}
+
+static int rk_edp_link_train_cr(struct rk_edp_priv *edp)
+{
+ struct rk3288_edp *regs = edp->regs;
+ int clock_recovery;
+ uint voltage, tries = 0;
+ u8 status[DP_LINK_STATUS_SIZE];
+ int i, ret;
+ u8 value;
+
+ value = DP_TRAINING_PATTERN_1;
+ writel(value, ®s->dp_training_ptn_set);
+ ret = rk_edp_dpcd_write(regs, DPCD_TRAINING_PATTERN_SET, &value, 1);
+ if (ret)
+ return ret;
+ memset(edp->train_set, '\0', sizeof(edp->train_set));
+
+ /* clock recovery loop */
+ clock_recovery = 0;
+ tries = 0;
+ voltage = 0xff;
+
+ while (1) {
+ rk_edp_set_link_training(edp, edp->train_set);
+ ret = rk_edp_dpcd_write(regs, DPCD_TRAINING_LANE0_SET,
+ edp->train_set,
+ edp->link_train.lane_count);
+ if (ret)
+ return ret;
+
+ mdelay(1);
+
+ ret = rk_edp_dpcd_read_link_status(edp, status);
+ if (ret) {
+ printf("displayport link status failed, ret=%d\n", ret);
+ break;
+ }
+
+ clock_recovery = rk_edp_clock_recovery(status,
+ edp->link_train.lane_count);
+ if (!clock_recovery)
+ break;
+
+ for (i = 0; i < edp->link_train.lane_count; i++) {
+ if ((edp->train_set[i] &
+ DP_TRAIN_MAX_SWING_REACHED) == 0)
+ break;
+ }
+ if (i == edp->link_train.lane_count) {
+ printf("clock recovery reached max voltage\n");
+ break;
+ }
+
+ if ((edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) ==
+ voltage) {
+ if (++tries == MAX_CR_LOOP) {
+ printf("clock recovery tried 5 times\n");
+ break;
+ }
+ } else {
+ tries = 0;
+ }
+
+ voltage = edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+
+ /* Compute new train_set as requested by sink */
+ edp_get_adjust_train(status, edp->link_train.lane_count,
+ edp->train_set);
+ }
+ if (clock_recovery) {
+ printf("clock recovery failed: %d\n", clock_recovery);
+ return clock_recovery;
+ } else {
+ debug("clock recovery at voltage %d pre-emphasis %d\n",
+ edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK,
+ (edp->train_set[0] & DP_TRAIN_PRE_EMPHASIS_MASK) >>
+ DP_TRAIN_PRE_EMPHASIS_SHIFT);
+ return 0;
+ }
+}
+
+static int rk_edp_link_train_ce(struct rk_edp_priv *edp)
+{
+ struct rk3288_edp *regs = edp->regs;
+ int channel_eq;
+ u8 value;
+ int tries;
+ u8 status[DP_LINK_STATUS_SIZE];
+ int ret;
+
+ value = DP_TRAINING_PATTERN_2;
+ writel(value, ®s->dp_training_ptn_set);
+ ret = rk_edp_dpcd_write(regs, DPCD_TRAINING_PATTERN_SET, &value, 1);
+ if (ret)
+ return ret;
+
+ /* channel equalization loop */
+ channel_eq = 0;
+ for (tries = 0; tries < 5; tries++) {
+ rk_edp_set_link_training(edp, edp->train_set);
+ udelay(400);
+
+ if (rk_edp_dpcd_read_link_status(edp, status) < 0) {
+ printf("displayport link status failed\n");
+ return -1;
+ }
+
+ channel_eq = rk_edp_channel_eq(status,
+ edp->link_train.lane_count);
+ if (!channel_eq)
+ break;
+ edp_get_adjust_train(status, edp->link_train.lane_count,
+ edp->train_set);
+ }
+
+ if (channel_eq) {
+ printf("channel eq failed, ret=%d\n", channel_eq);
+ return channel_eq;
+ }
+
+ debug("channel eq at voltage %d pre-emphasis %d\n",
+ edp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK,
+ (edp->train_set[0] & DP_TRAIN_PRE_EMPHASIS_MASK)
+ >> DP_TRAIN_PRE_EMPHASIS_SHIFT);
+
+ return 0;
+}
+
+static int rk_edp_init_training(struct rk_edp_priv *edp)
+{
+ u8 values[3];
+ int ret;
+
+ ret = rk_edp_dpcd_read(edp->regs, DPCD_DPCD_REV, values,
+ sizeof(values));
+ if (ret < 0)
+ return ret;
+
+ edp->link_train.revision = values[0];
+ edp->link_train.link_rate = values[1];
+ edp->link_train.lane_count = values[2] & DP_MAX_LANE_COUNT_MASK;
+
+ debug("max link rate:%d.%dGps max number of lanes:%d\n",
+ edp->link_train.link_rate * 27 / 100,
+ edp->link_train.link_rate * 27 % 100,
+ edp->link_train.lane_count);
+
+ if ((edp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
+ (edp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
+ debug("Rx Max Link Rate is abnormal :%x\n",
+ edp->link_train.link_rate);
+ return -EPERM;
+ }
+
+ if (edp->link_train.lane_count == 0) {
+ debug("Rx Max Lane count is abnormal :%x\n",
+ edp->link_train.lane_count);
+ return -EPERM;
+ }
+
+ ret = rk_edp_link_power_up(edp);
+ if (ret)
+ return ret;
+
+ return rk_edp_link_configure(edp);
+}
+
+static int rk_edp_hw_link_training(struct rk_edp_priv *edp)
+{
+ ulong start;
+ u32 val;
+ int ret;
+
+ /* Set link rate and count as you want to establish */
+ writel(edp->link_train.link_rate, &edp->regs->link_bw_set);
+ writel(edp->link_train.lane_count, &edp->regs->lane_count_set);
+
+ ret = rk_edp_link_train_cr(edp);
+ if (ret)
+ return ret;
+ ret = rk_edp_link_train_ce(edp);
+ if (ret)
+ return ret;
+
+ writel(HW_LT_EN, &edp->regs->dp_hw_link_training);
+ start = get_timer(0);
+ do {
+ val = readl(&edp->regs->dp_hw_link_training);
+ if (!(val & HW_LT_EN))
+ break;
+ } while (get_timer(start) < 10);
+
+ if (val & HW_LT_ERR_CODE_MASK) {
+ printf("edp hw link training error: %d\n",
+ val >> HW_LT_ERR_CODE_SHIFT);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int rk_edp_select_i2c_device(struct rk3288_edp *regs,
+ unsigned int device_addr,
+ unsigned int val_addr)
+{
+ int ret;
+
+ /* Set EDID device address */
+ writel(device_addr, ®s->aux_addr_7_0);
+ writel(0x0, ®s->aux_addr_15_8);
+ writel(0x0, ®s->aux_addr_19_16);
+
+ /* Set offset from base address of EDID device */
+ writel(val_addr, ®s->buf_data[0]);
+
+ /*
+ * Set I2C transaction and write address
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ writel(AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT |
+ AUX_TX_COMM_WRITE, ®s->aux_ch_ctl_1);
+
+ /* Start AUX transaction */
+ ret = rk_edp_start_aux_transaction(regs);
+ if (ret != 0) {
+ debug("select_i2c_device Aux Transaction fail!\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rk_edp_i2c_read(struct rk3288_edp *regs, unsigned int device_addr,
+ unsigned int val_addr, unsigned int count, u8 edid[])
+{
+ u32 val;
+ unsigned int i, j;
+ unsigned int cur_data_idx;
+ unsigned int defer = 0;
+ int ret = 0;
+
+ for (i = 0; i < count; i += 16) {
+ for (j = 0; j < 10; j++) { /* try 10 times */
+ /* Clear AUX CH data buffer */
+ writel(BUF_CLR, ®s->buf_data_ctl);
+
+ /* Set normal AUX CH command */
+ clrbits_le32(®s->aux_ch_ctl_2, ADDR_ONLY);
+
+ /*
+ * If Rx sends defer, Tx sends only reads
+ * request without sending addres
+ */
+ if (!defer) {
+ ret = rk_edp_select_i2c_device(regs,
+ device_addr,
+ val_addr + i);
+ } else {
+ defer = 0;
+ }
+
+ /*
+ * Set I2C transaction and write data
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ writel(AUX_LENGTH(16) | AUX_TX_COMM_I2C_TRANSACTION |
+ AUX_TX_COMM_READ, ®s->aux_ch_ctl_1);
+
+ /* Start AUX transaction */
+ ret = rk_edp_start_aux_transaction(regs);
+ if (ret == 0) {
+ break;
+ } else {
+ debug("Aux Transaction fail!\n");
+ continue;
+ }
+
+ /* Check if Rx sends defer */
+ val = readl(®s->aux_rx_comm);
+ if (val == AUX_RX_COMM_AUX_DEFER ||
+ val == AUX_RX_COMM_I2C_DEFER) {
+ debug("Defer: %d\n\n", val);
+ defer = 1;
+ }
+ }
+
+ if (ret)
+ return ret;
+
+ for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) {
+ val = readl(®s->buf_data[cur_data_idx]);
+ edid[i + cur_data_idx] = (u8)val;
+ }
+ }
+
+ return 0;
+}
+
+static int rk_edp_set_link_train(struct rk_edp_priv *edp)
+{
+ int ret;
+
+ ret = rk_edp_init_training(edp);
+ if (ret) {
+ printf("DP LT init failed!\n");
+ return ret;
+ }
+
+ ret = rk_edp_hw_link_training(edp);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void rk_edp_init_video(struct rk3288_edp *regs)
+{
+ writel(VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG,
+ ®s->common_int_sta_1);
+ writel(CHA_CRI(4) | CHA_CTRL, ®s->sys_ctl_2);
+ writel(VID_HRES_TH(2) | VID_VRES_TH(0), ®s->video_ctl_8);
+}
+
+static void rk_edp_config_video_slave_mode(struct rk3288_edp *regs)
+{
+ clrbits_le32(®s->func_en_1, VID_FIFO_FUNC_EN_N | VID_CAP_FUNC_EN_N);
+}
+
+static void rk_edp_set_video_cr_mn(struct rk3288_edp *regs,
+ enum clock_recovery_m_value_type type,
+ u32 m_value,
+ u32 n_value)
+{
+ if (type == REGISTER_M) {
+ setbits_le32(®s->sys_ctl_4, FIX_M_VID);
+ writel(m_value & 0xff, ®s->m_vid_0);
+ writel((m_value >> 8) & 0xff, ®s->m_vid_1);
+ writel((m_value >> 16) & 0xff, ®s->m_vid_2);
+
+ writel(n_value & 0xf, ®s->n_vid_0);
+ writel((n_value >> 8) & 0xff, ®s->n_vid_1);
+ writel((n_value >> 16) & 0xff, ®s->n_vid_2);
+ } else {
+ clrbits_le32(®s->sys_ctl_4, FIX_M_VID);
+
+ writel(0x00, ®s->n_vid_0);
+ writel(0x80, ®s->n_vid_1);
+ writel(0x00, ®s->n_vid_2);
+ }
+}
+
+static int rk_edp_is_video_stream_clock_on(struct rk3288_edp *regs)
+{
+ ulong start;
+ u32 val;
+
+ start = get_timer(0);
+ do {
+ val = readl(®s->sys_ctl_1);
+
+ /* must write value to update DET_STA bit status */
+ writel(val, ®s->sys_ctl_1);
+ val = readl(®s->sys_ctl_1);
+ if (!(val & DET_STA))
+ continue;
+
+ val = readl(®s->sys_ctl_2);
+
+ /* must write value to update CHA_STA bit status */
+ writel(val, ®s->sys_ctl_2);
+ val = readl(®s->sys_ctl_2);
+ if (!(val & CHA_STA))
+ return 0;
+
+ } while (get_timer(start) < 100);
+
+ return -ETIMEDOUT;
+}
+
+static int rk_edp_is_video_stream_on(struct rk_edp_priv *edp)
+{
+ ulong start;
+ u32 val;
+
+ start = get_timer(0);
+ do {
+ val = readl(&edp->regs->sys_ctl_3);
+
+ /* must write value to update STRM_VALID bit status */
+ writel(val, &edp->regs->sys_ctl_3);
+
+ val = readl(&edp->regs->sys_ctl_3);
+ if (!(val & STRM_VALID))
+ return 0;
+ } while (get_timer(start) < 100);
+
+ return -ETIMEDOUT;
+}
+
+static int rk_edp_config_video(struct rk_edp_priv *edp)
+{
+ int ret;
+
+ rk_edp_config_video_slave_mode(edp->regs);
+
+ if (!rk_edp_get_pll_locked(edp->regs)) {
+ debug("PLL is not locked yet.\n");
+ return -ETIMEDOUT;
+ }
+
+ ret = rk_edp_is_video_stream_clock_on(edp->regs);
+ if (ret)
+ return ret;
+
+ /* Set to use the register calculated M/N video */
+ rk_edp_set_video_cr_mn(edp->regs, CALCULATED_M, 0, 0);
+
+ /* For video bist, Video timing must be generated by register */
+ clrbits_le32(&edp->regs->video_ctl_10, F_SEL);
+
+ /* Disable video mute */
+ clrbits_le32(&edp->regs->video_ctl_1, VIDEO_MUTE);
+
+ /* Enable video at next frame */
+ setbits_le32(&edp->regs->video_ctl_1, VIDEO_EN);
+
+ return rk_edp_is_video_stream_on(edp);
+}
+
+static void rockchip_edp_force_hpd(struct rk_edp_priv *edp)
+{
+ setbits_le32(&edp->regs->sys_ctl_3, F_HPD | HPD_CTRL);
+}
+
+static int rockchip_edp_get_plug_in_status(struct rk_edp_priv *edp)
+{
+ u32 val;
+
+ val = readl(&edp->regs->sys_ctl_3);
+ if (val & HPD_STATUS)
+ return 1;
+
+ return 0;
+}
+
+/*
+ * support edp HPD function
+ * some hardware version do not support edp hdp,
+ * we use 200ms to try to get the hpd single now,
+ * if we can not get edp hpd single, it will delay 200ms,
+ * also meet the edp power timing request, to compatible
+ * all of the hardware version
+ */
+static void rockchip_edp_wait_hpd(struct rk_edp_priv *edp)
+{
+ ulong start;
+
+ start = get_timer(0);
+ do {
+ if (rockchip_edp_get_plug_in_status(edp))
+ return;
+ udelay(100);
+ } while (get_timer(start) < 200);
+
+ debug("do not get hpd single, force hpd\n");
+ rockchip_edp_force_hpd(edp);
+}
+
+static int rk_edp_enable(struct udevice *dev, int panel_bpp,
+ const struct display_timing *edid)
+{
+ struct rk_edp_priv *priv = dev_get_priv(dev);
+ int ret = 0;
+
+ ret = rk_edp_set_link_train(priv);
+ if (ret) {
+ printf("link train failed!\n");
+ return ret;
+ }
+
+ rk_edp_init_video(priv->regs);
+ ret = rk_edp_config_video(priv);
+ if (ret) {
+ printf("config video failed\n");
+ return ret;
+ }
+ ret = panel_enable_backlight(priv->panel);
+ if (ret) {
+ debug("%s: backlight error: %d\n", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rk_edp_read_edid(struct udevice *dev, u8 *buf, int buf_size)
+{
+ struct rk_edp_priv *priv = dev_get_priv(dev);
+ u32 edid_size = EDID_LENGTH;
+ int ret;
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ ret = rk_edp_i2c_read(priv->regs, EDID_ADDR, EDID_HEADER,
+ EDID_LENGTH, &buf[EDID_HEADER]);
+ if (ret) {
+ debug("EDID read failed\n");
+ continue;
+ }
+
+ /*
+ * check if the EDID has an extension flag, and read additional
+ * EDID data if needed
+ */
+ if (buf[EDID_EXTENSION_FLAG]) {
+ edid_size += EDID_LENGTH;
+ ret = rk_edp_i2c_read(priv->regs, EDID_ADDR,
+ EDID_LENGTH, EDID_LENGTH,
+ &buf[EDID_LENGTH]);
+ if (ret) {
+ debug("EDID Read failed!\n");
+ continue;
+ }
+ }
+ goto done;
+ }
+
+ /* After 3 attempts, give up */
+ return ret;
+
+done:
+ return edid_size;
+}
+
+static int rk_edp_ofdata_to_platdata(struct udevice *dev)
+{
+ struct rk_edp_priv *priv = dev_get_priv(dev);
+
+ priv->regs = (struct rk3288_edp *)dev_get_addr(dev);
+ priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+
+ return 0;
+}
+
+int rk_edp_probe(struct udevice *dev)
+{
+ struct display_plat *uc_plat = dev_get_uclass_platdata(dev);
+ struct rk_edp_priv *priv = dev_get_priv(dev);
+ struct rk3288_edp *regs = priv->regs;
+ struct udevice *clk;
+ int periph;
+ int ret;
+
+ ret = uclass_get_device_by_phandle(UCLASS_PANEL, dev, "rockchip,panel",
+ &priv->panel);
+ if (ret) {
+ debug("%s: Cannot find panel for '%s' (ret=%d)\n", __func__,
+ dev->name, ret);
+ return ret;
+ }
+
+ int vop_id = uc_plat->source_id;
+ debug("%s, uc_plat=%p, vop_id=%u\n", __func__, uc_plat, vop_id);
+
+ ret = clk_get_by_index(dev, 1, &clk);
+ if (ret >= 0) {
+ periph = ret;
+ ret = clk_set_periph_rate(clk, periph, 0);
+ }
+ if (ret) {
+ debug("%s: Failed to set EDP clock: ret=%d\n", __func__, ret);
+ return ret;
+ }
+
+ ret = clk_get_by_index(uc_plat->src_dev, 0, &clk);
+ if (ret >= 0) {
+ periph = ret;
+ ret = clk_set_periph_rate(clk, periph, 192000000);
+ }
+ if (ret < 0) {
+ debug("%s: Failed to set clock in source device '%s': ret=%d\n",
+ __func__, uc_plat->src_dev->name, ret);
+ return ret;
+ }
+
+ /* grf_edp_ref_clk_sel: from internal 24MHz or 27MHz clock */
+ rk_setreg(&priv->grf->soc_con12, 1 << 4);
+
+ /* select epd signal from vop0 or vop1 */
+ rk_setreg(&priv->grf->soc_con6, (vop_id == 1) ? (1 << 5) : (1 << 5));
+
+ rockchip_edp_wait_hpd(priv);
+
+ rk_edp_init_refclk(regs);
+ rk_edp_init_interrupt(regs);
+ rk_edp_enable_sw_function(regs);
+ ret = rk_edp_init_analog_func(regs);
+ if (ret)
+ return ret;
+ rk_edp_init_aux(regs);
+
+ return 0;
+}
+
+static const struct dm_display_ops dp_rockchip_ops = {
+ .read_edid = rk_edp_read_edid,
+ .enable = rk_edp_enable,
+};
+
+static const struct udevice_id rockchip_dp_ids[] = {
+ { .compatible = "rockchip,rk3288-edp" },
+ { }
+};
+
+U_BOOT_DRIVER(dp_rockchip) = {
+ .name = "edp_rockchip",
+ .id = UCLASS_DISPLAY,
+ .of_match = rockchip_dp_ids,
+ .ops = &dp_rockchip_ops,
+ .ofdata_to_platdata = rk_edp_ofdata_to_platdata,
+ .probe = rk_edp_probe,
+ .priv_auto_alloc_size = sizeof(struct rk_edp_priv),
+};
--
2.7.0.rc3.207.g0ac5344
More information about the U-Boot
mailing list