[U-Boot] [PATCH 2/2] QE: assgin pins to QE-HDLC
Zhao Qiang
qiang.zhao at nxp.com
Fri Jan 22 04:24:15 CET 2016
QE-HDLC and USB multi-use the pins, when set "hwconfig=qe-hdlc",
assign the pins to QE-HDLC, if not, assgin to USB
Signed-off-by: Zhao Qiang <qiang.zhao at nxp.com>
---
board/freescale/ls1043ardb/ls1043ardb.c | 54 ++++++++++++++++++++++++---------
1 file changed, 39 insertions(+), 15 deletions(-)
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c
index 834fdff..042a59f 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -75,23 +75,8 @@ int dram_init(void)
int board_early_init_f(void)
{
- struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
- u32 usb_pwrfault;
-
fsl_lsch2_early_init_f();
-#ifdef CONFIG_HAS_FSL_XHCI_USB
- out_be32(&scfg->rcwpmuxcr0, 0x3333);
- out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
- usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED <<
- SCFG_USBPWRFAULT_USB3_SHIFT) |
- (SCFG_USBPWRFAULT_DEDICATED <<
- SCFG_USBPWRFAULT_USB2_SHIFT) |
- (SCFG_USBPWRFAULT_SHARED <<
- SCFG_USBPWRFAULT_USB1_SHIFT);
- out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
-#endif
-
return 0;
}
@@ -126,6 +111,27 @@ int board_init(void)
int config_board_mux(void)
{
+ struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+ u32 usb_pwrfault;
+
+ if (hwconfig("qe-hdlc")) {
+ out_be32(&scfg->rcwpmuxcr0,
+ (in_be32(&scfg->rcwpmuxcr0) & ~0xff00) | 0x6600);
+ printf("Assign to qe-hdlc clk, rcwpmuxcr0=%x\n",
+ in_be32(&scfg->rcwpmuxcr0));
+ } else {
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+ out_be32(&scfg->rcwpmuxcr0, 0x3333);
+ out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
+ usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED <<
+ SCFG_USBPWRFAULT_USB3_SHIFT) |
+ (SCFG_USBPWRFAULT_DEDICATED <<
+ SCFG_USBPWRFAULT_USB2_SHIFT) |
+ (SCFG_USBPWRFAULT_SHARED <<
+ SCFG_USBPWRFAULT_USB1_SHIFT);
+ out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
+#endif
+ }
return 0;
}
@@ -152,6 +158,16 @@ int misc_init_r(void)
}
#endif
+void fdt_del_qe(void *blob)
+{
+ int nodeoff = 0;
+
+ while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+ "fsl,qe")) >= 0) {
+ fdt_del_node(blob, nodeoff);
+ }
+}
+
int ft_board_setup(void *blob, bd_t *bd)
{
u64 base[CONFIG_NR_DRAM_BANKS];
@@ -169,6 +185,14 @@ int ft_board_setup(void *blob, bd_t *bd)
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_ethernet(blob);
#endif
+
+ if (hwconfig("qe-hdlc"))
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+ fdt_del_node_and_alias(blob, "usb1");
+#endif
+ else if (!hwconfig("qe-uart"))
+ fdt_del_qe(blob);
+
return 0;
}
--
2.1.0.27.g96db324
More information about the U-Boot
mailing list