[U-Boot] [PATCH v2 2/8] drivers: net: phy: micrel: fix build errors with CONFIG_DM_ETH

[Mugunthan V N]

When Micrel phy is selected without CONFIG_PHY_MICREL_KSZ9031 or
CONFIG_PHY_MICREL_KSZ9021 there  is a build error. Fixing this
by adding proper ifdefs

drivers/net/phy/micrel.c:370:39: error: array type has incomplete element type
 static const struct ksz90x1_reg_field ksz9031_ctl_grp[] =
                                       ^
drivers/net/phy/micrel.c:372:39: error: array type has incomplete element type
 static const struct ksz90x1_reg_field ksz9031_clk_grp[] =
                                       ^
drivers/net/phy/micrel.c: In function ‘ksz9031_of_config’:
drivers/net/phy/micrel.c:377:23: error: array type has incomplete element type
  struct ksz90x1_ofcfg ofcfg[] = {
                       ^
drivers/net/phy/micrel.c:379:13: error: ‘ksz90x1_rxd_grp’ undeclared (first use in this function)
   { MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 },
             ^
drivers/net/phy/micrel.c:379:13: note: each undeclared identifier is reported only once for each function it appears in
drivers/net/phy/micrel.c:380:13: error: ‘ksz90x1_txd_grp’ undeclared (first use in this function)
   { MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 },
             ^
drivers/net/phy/micrel.c:386:3: warning: implicit declaration of function ‘ksz90x1_of_config_group’ [-Wimplicit-function-declaration]
   ret = ksz90x1_of_config_group(phydev, &(ofcfg[i]));
   ^
drivers/net/phy/micrel.c:377:23: warning: unused variable ‘ofcfg’ [-Wunused-variable]
  struct ksz90x1_ofcfg ofcfg[] = {
                       ^
drivers/net/phy/micrel.c: At top level:
drivers/net/phy/micrel.c:370:39: warning: ‘ksz9031_ctl_grp’ defined but not used [-Wunused-variable]
 static const struct ksz90x1_reg_field ksz9031_ctl_grp[] =
                                       ^
drivers/net/phy/micrel.c:372:39: warning: ‘ksz9031_clk_grp’ defined but not used [-Wunused-variable]
 static const struct ksz90x1_reg_field ksz9031_clk_grp[] =
                                       ^
scripts/Makefile.build:277: recipe for target 'drivers/net/phy/micrel.o' failed
make[1]: *** [drivers/net/phy/micrel.o] Error 1
Makefile:1201: recipe for target 'drivers/net/phy' failed
make: *** [drivers/net/phy] Error 2
make: *** Waiting for unfinished jobs....

Signed-off-by: Mugunthan V N <mugunthanvnm at ti.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
---
 drivers/net/phy/micrel.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 19b6bc7..73ed42a 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -260,7 +260,8 @@ static int ksz90x1_of_config_group(struct phy_device *phydev,
 #define CTRL1000_CONFIG_MASTER		(1 << 11)
 #define CTRL1000_MANUAL_CONFIG		(1 << 12)
 
-#ifdef CONFIG_DM_ETH
+#if defined(CONFIG_DM_ETH) && (defined(CONFIG_PHY_MICREL_KSZ9021) || \
+			       defined(CONFIG_PHY_MICREL_KSZ9031))
 static const struct ksz90x1_reg_field ksz9021_clk_grp[] = {
 	{ "txen-skew-ps", 4, 0, 0x7 }, { "txc-skew-ps", 4, 4, 0x7 },
 	{ "rxdv-skew-ps", 4, 8, 0x7 }, { "rxc-skew-ps", 4, 12, 0x7 },
@@ -366,7 +367,8 @@ static struct phy_driver ksz9021_driver = {
 #define MII_KSZ9031_MMD_ACCES_CTRL	0x0d
 #define MII_KSZ9031_MMD_REG_DATA	0x0e
 
-#ifdef CONFIG_DM_ETH
+#if defined(CONFIG_DM_ETH) && (defined(CONFIG_PHY_MICREL_KSZ9021) || \
+			       defined(CONFIG_PHY_MICREL_KSZ9031))
 static const struct ksz90x1_reg_field ksz9031_ctl_grp[] =
 	{ { "txen-skew-ps", 4, 0, 0x7 }, { "rxdv-skew-ps", 4, 4, 0x7 } };
 static const struct ksz90x1_reg_field ksz9031_clk_grp[] =
-- 
2.7.0.rc3