[U-Boot] [PATCH] net: phy: Use 'autoneg' flag from phydev

[amessier.tyco at gmail.com]

From: Alexandre Messier <amessier at tycoint.com>

Use the 'autoneg' flag available in phydev when checking if
autoneg is in use.

The previous implementation was checking directly in the PHY
if autoneg was supported. Some PHYs will report that autoneg
is supported, even when it is disabled. Thus it is not possible
to use that bit to determine if autoneg is currently in use or
not.

Signed-off-by: Alexandre Messier <amessier at tycoint.com>
---
 drivers/net/phy/phy.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 1d8eed5..10a7b30 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -223,7 +223,8 @@ int genphy_update_link(struct phy_device *phydev)
 	if (phydev->link && mii_reg & BMSR_LSTATUS)
 		return 0;
 
-	if ((mii_reg & BMSR_ANEGCAPABLE) && !(mii_reg & BMSR_ANEGCOMPLETE)) {
+	if ((phydev->autoneg == AUTONEG_ENABLE) &&
+	    !(mii_reg & BMSR_ANEGCOMPLETE)) {
 		int i = 0;
 
 		printf("%s Waiting for PHY auto negotiation to complete",
@@ -279,7 +280,7 @@ int genphy_parse_link(struct phy_device *phydev)
 	int mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
 
 	/* We're using autonegotiation */
-	if (phydev->supported & SUPPORTED_Autoneg) {
+	if (phydev->autoneg == AUTONEG_ENABLE) {
 		u32 lpa = 0;
 		int gblpa = 0;
 		u32 estatus = 0;
-- 
1.8.3.1