[U-Boot] [PATCH v3] net: macb: Not all the GEM are gigabit capable
Andreas Bießmann
andreas.devel at googlemail.com
Sun Jan 24 22:53:10 CET 2016
On 16.12.15 14:50, Gregory CLEMENT wrote:
> During the initialization of PHY the gigabit bit capable is set if the
> controller is a GEM. However, for sama5d2 and sama5d4, the GEM is
> configured to support only 10/100.
>
> Improperly setting the GBE capability leads to an unresponsive MAC
> controller. This patch fixes this behavior allowing using the gmac with
> these SoCs.
>
> Suggested-by: Nicolas Ferre <nicolas.ferre at atmel.com>
> Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
Reviewed-by: Andreas Bießmann <andreas.devel at googlemail.com>
> ---
> Hi,
>
> in this v3, I fixed the sama5d2 typo and the missing brace.
>
> I also took care of the cpu_is_* symbols which may not be defined
> depending of the choice of the SoC.
>
> Gregory
>
> drivers/net/macb.c | 21 +++++++++++++++++++--
> 1 file changed, 19 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index a5c1880..e801313 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -109,6 +109,23 @@ static int macb_is_gem(struct macb_device *macb)
> return MACB_BFEXT(IDNUM, macb_readl(macb, MID)) == 0x2;
> }
>
> +#ifndef cpu_is_sama5d2
> +#define cpu_is_sama5d2() 0
> +#endif
> +
> +#ifndef cpu_is_sama5d4
> +#define cpu_is_sama5d4() 0
> +#endif
> +
> +static int gem_is_gigabit_capable(struct macb_device *macb)
> +{
> + /*
> + * The GEM controllers embeded in SAMA5D2 and SAMA5D4 are
> + * configured to support only 10/100.
> + */
> + return macb_is_gem(macb) && !cpu_is_sama5d2() && !cpu_is_sama5d4();
> +}
> +
> static void macb_mdio_write(struct macb_device *macb, u8 reg, u16 value)
> {
> unsigned long netctl;
> @@ -480,8 +497,8 @@ static int macb_phy_init(struct macb_device *macb)
> return 0;
> }
>
> - /* First check for GMAC */
> - if (macb_is_gem(macb)) {
> + /* First check for GMAC and that it is GiB capable */
> + if (gem_is_gigabit_capable(macb)){
> lpa = macb_mdio_read(macb, MII_STAT1000);
>
> if (lpa & (LPA_1000FULL | LPA_1000HALF)) {
>
More information about the U-Boot
mailing list