[U-Boot] [PATCHv7 6/7] igep00x0: UBIize
Heiko Schocher
hs at denx.de
Mon Jan 25 09:13:58 CET 2016
Hello Enric,
Am 25.01.2016 um 08:26 schrieb Enric Balletbo Serra:
> Hi,
>
> 2016-01-25 7:39 GMT+01:00 Heiko Schocher <hs at denx.de>:
>> Hello Enric, Ladislav,
>>
>> Am 22.01.2016 um 23:35 schrieb Enric Balletbo Serra:
>>>
>>> Hi Ladis,
>>>
>>> Many thanks for your work on this, see some comments below ...
>>
>>
>> Sorry, pull request is sent with this patch, see:
>>
>> http://lists.denx.de/pipermail/u-boot/2016-January/239855.html
>>
>> @Ladislav: Please send changes in a follow up patch, thanks!
>>
>>
>>
>>> 2016-01-21 7:07 GMT+01:00 Heiko Schocher <hs at denx.de>:
>>>>
>>>> Hello Ladislav,
>>>>
>>>> Am 17.01.2016 um 04:16 schrieb Ladislav Michl:
>>>>>
>>>>>
>>>>> Convert IGEP board to use UBI volumes for U-Boot, its environment and
>>>>> kernel. With exception of first four sectors read by SoC boot
>>>>> ROM whole NAND is UBI managed. As code is too big now, drop
>>>>> CONFIG_SPL_EXT_SUPPORT to make it fit.
>>>>>
>>>>> Signed-off-by: Ladislav Michl <ladis at linux-mips.org>
>>>>> ---
>>>>> include/configs/omap3_igep00x0.h | 80
>>>>> ++++++++++++++++++++++------------------
>>>>> 1 file changed, 45 insertions(+), 35 deletions(-)
>>>>
>>>>
>>>>
>>>> Reviewed-by: Heiko Schocher <hs at denx.de>
>>>>
>>>> bye,
>>>> Heiko
>>>>
>>>>>
>>>>> diff --git a/include/configs/omap3_igep00x0.h
>>>>> b/include/configs/omap3_igep00x0.h
>>>>> index 5da6cfd..9afbcbe 100644
>>>>> --- a/include/configs/omap3_igep00x0.h
>>>>> +++ b/include/configs/omap3_igep00x0.h
>>>>> @@ -74,6 +74,8 @@
>>>>> #define CONFIG_CMD_CACHE
>>>>> #ifdef CONFIG_BOOT_ONENAND
>>>>> #define CONFIG_CMD_ONENAND /* ONENAND support */
>>>>> +#else
>>>>> +#define CONFIG_CMD_UBI
>>>>> #endif
>>>>> #define CONFIG_CMD_DHCP
>>>>> #define CONFIG_CMD_PING
>>>>> @@ -86,6 +88,10 @@
>>>>> "stdout=serial\0" \
>>>>> "stderr=serial\0"
>>>>>
>>>>> +#define ENV_MTD_SETTINGS \
>>>>> + "mtdids=nand0=gpmc-nand.0\0" \
>>>>> + "mtdparts=mtdparts=gpmc-nand.0:512k(SPL),-(UBI)\0"
>>>>> +
>>>
>>>
>>> I think this should be protected by CONFIG_BOOT_NAND, if is defined
>>> CONFIG_BOOT_ONENAND the ENV_MTD_SETTINGS are wrong.
>>
>>
>> Good point ...
>>
>>> Also, as we're changing the memory map, I'd like to change the
>>> reserved space for SPL to 2M instead of 512k, so we cover all NAND
>>> block sizes from (64KB to 512KB)
>>
>>
>> I do not understand this, but I have no details about the hw ...
>>
>
> The ROM boot on OMAP reads the first 4 blocks searching for the SPL,
> in production is a practice flash the SPL 4 times. OneNAND/NAND
> devices can have different block sizes and the OMAP ROM boot supports
> block sizes from 64KB to 512K. For IGEP boards in particular, at least
> there are boards that have block size of 128K and 256K. What I would
> meant here is set as default the mtdparts variable to reserve 2M for
> SPL, just to cover all the cases.
Thanks for the explanation.
> mtdparts=mtdparts=gpmc-nand.0:2m(SPL),-(UBI)\0
>
>
>>
>>>>> #define MEM_LAYOUT_SETTINGS \
>>>>> DEFAULT_LINUX_BOOT_ENV \
>>>>> "scriptaddr=0x87E00000\0" \
>>>>> @@ -96,36 +102,15 @@
>>>>>
>>>>> #include <config_distro_bootcmd.h>
>>>>>
>>>>> -
>>>>> #define CONFIG_EXTRA_ENV_SETTINGS \
>>>>> ENV_DEVICE_SETTINGS \
>>>>> + ENV_MTD_SETTINGS \
>>>>> MEM_LAYOUT_SETTINGS \
>>>>> BOOTENV
>>>>>
>>>>> #endif
>>>>>
>>>>> /*
>>>>> - * FLASH and environment organization
>>>>> - */
>>>>> -
>>>>> -#ifdef CONFIG_BOOT_ONENAND
>>>>> -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
>>>>> -
>>>>> -#define ONENAND_ENV_OFFSET 0x260000 /* environment starts
>>>>> here */
>>>>> -
>>>>> -#define CONFIG_ENV_IS_IN_ONENAND 1
>>>>> -#define CONFIG_ENV_SIZE (512 << 10) /* Total
>>>>> Size
>>>>> Environment */
>>>>> -#define CONFIG_ENV_ADDR ONENAND_ENV_OFFSET
>>>>> -#endif
>>>>> -
>>>>> -#ifdef CONFIG_NAND
>>>>> -#define CONFIG_ENV_OFFSET 0x260000 /* environment starts
>>>>> here */
>>>>> -#define CONFIG_ENV_IS_IN_NAND 1
>>>>> -#define CONFIG_ENV_SIZE (512 << 10) /* Total
>>>>> Size
>>>>> Environment */
>>>>> -#define CONFIG_ENV_ADDR NAND_ENV_OFFSET
>>>>> -#endif
>>>>> -
>>>>> -/*
>>>>> * SMSC911x Ethernet
>>>>> */
>>>>> #if defined(CONFIG_CMD_NET)
>>>>> @@ -134,19 +119,50 @@
>>>>> #define CONFIG_SMC911X_BASE 0x2C000000
>>>>> #endif /* (CONFIG_CMD_NET) */
>>>>>
>>>>> +/*
>>>>> + * FLASH and environment organization
>>>>> + */
>>>>> +#ifdef CONFIG_NAND
>>>>> +#define CONFIG_SPL_UBI 1
>>>>> +#define CONFIG_SPL_UBI_MAX_VOL_LEBS 256
>>>>> +#define CONFIG_SPL_UBI_MAX_PEB_SIZE (256*1024)
>>>>> +#define CONFIG_SPL_UBI_MAX_PEBS 4096
>>>>> +#define CONFIG_SPL_UBI_VOL_IDS 8
>>>>> +#define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0
>>>>> +#define CONFIG_SPL_UBI_LOAD_KERNEL_ID 3
>>>>> +#define CONFIG_SPL_UBI_LOAD_ARGS_ID 4
>>>>> +#define CONFIG_SPL_UBI_PEB_OFFSET 4
>>>>> +#define CONFIG_SPL_UBI_VID_OFFSET 512
>>>>> +#define CONFIG_SPL_UBI_LEB_START 2048
>>>>> +#define CONFIG_SPL_UBI_INFO_ADDR 0x88080000
>>>>> +
>>>>> +#define CONFIG_ENV_IS_IN_UBI 1
>>>>> +#define CONFIG_ENV_UBI_PART "UBI"
>>>>> +#define CONFIG_ENV_UBI_VOLUME "config"
>>>>> +#define CONFIG_ENV_UBI_VOLUME_REDUND "config_r"
>>>>> +#define CONFIG_UBI_SILENCE_MSG 1
>>>>> +#define CONFIG_UBIFS_SILENCE_MSG 1
>>>>> +#else
>>>>> +#define CONFIG_ENV_IS_NOWHERE
>>>>> +#endif
>>>>> +#define CONFIG_ENV_SIZE (32*1024)
>>>>> +
>>>>> +#define CONFIG_RBTREE
>>>>> +#define CONFIG_MTD_PARTITIONS
>>>>> +#define MTDIDS_DEFAULT "nand0=gpmc-nand.0"
>>>>> +#define MTDPARTS_DEFAULT
>>>>> "mtdparts=gpmc-nand.0:512k(SPL),-(UBI)"
>>>>> +
>>>
>>>
>>> Same comment as above.
>>>
>>>>> /* OneNAND boot config */
>>>>> #ifdef CONFIG_BOOT_ONENAND
>>>>> #define CONFIG_SPL_ONENAND_SUPPORT
>>>>> -#define CONFIG_SYS_ONENAND_U_BOOT_OFFS 0x80000
>>>>> #define CONFIG_SYS_ONENAND_PAGE_SIZE 2048
>>>>> -#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x80000
>>>>> -#define CONFIG_SPL_ONENAND_LOAD_SIZE \
>>>>> - (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
>>>>> -
>>>>> +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
>>>>> +#define CONFIG_SYS_ONENAND_U_BOOT_OFFS 0x80000
>>>>> #endif
>>>>>
>>>>> /* NAND boot config */
>>>>> #ifdef CONFIG_NAND
>>>>> +#define CONFIG_SPL_NAND_SUPPORT
>>>>> #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
>>>>> #define CONFIG_SYS_NAND_5_ADDR_CYCLE
>>>>> #define CONFIG_SYS_NAND_PAGE_COUNT 64
>>>>> @@ -166,14 +182,8 @@
>>>>> #define CONFIG_NAND_OMAP_ECCSCHEME
>>>>> OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
>>>>> #define CONFIG_NAND_OMAP_GPMC
>>>>> #define CONFIG_BCH
>>>>> -
>>>>> -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
>>>>> -/* NAND: SPL falcon mode configs */
>>>>> -#ifdef CONFIG_SPL_OS_BOOT
>>>>> -#define CONFIG_CMD_SPL_NAND_OFS 0x240000
>>>>> -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
>>>>> -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
>>>>> -#endif
>>>>> #endif
>>>>>
>>>>> +#undef CONFIG_SPL_EXT_SUPPORT
>>>>> +
>>>>> #endif /* __IGEP00X0_H */
>>>>>
>>>>
>>>
>>> About the new layout you propose the following, right?
>>>
>>> volume 0 is u-boot.img, 1 and 2 env, 3 kernel, 4 FDT, 5 rootfs (ubifs)
>>>
>>> It's not possible load the kernel and the FDT from the rootfs directly,
>>> right?
>>
>>
>> That would be nice, but for this we need UBIFS support in SPL.
>> Patches are welcome ;-)
>>
>
> Hehe, yes, I think the problem is fit the ubifs into the SPL size.
Yes, maybe ...
bye,
Heiko
>
>>> BTW, I created the 5 volumes and copied the files to every volume but
>>> I get following errors, do you know what I am missing?
>>>
>>> U-Boot SPL 2016.01-00358-g4efe05f (Jan 22 2016 - 17:16:04)
>>> Trying to boot from NAND
>>> UBI warning: LEB 0 of 1 is missing
>>> UBI warning: Failed to load volume 3
>>> UBI warning: LEB 0 of 1 is missing
>>> UBI warning: Failed to load volume 3
>>> UBI warning: Failed
>>> Loading Linux failed, falling back to U-Boot.
>>> UBI warning: LEB 0 of 1 is missing
>>> UBI warning: Failed to load volume 0
>>> UBI warning: LEB 0 of 1 is missing
>>> UBI warning: Failed to load volume 0
>>> UBI warning: Failed
>>> SPL: failed to boot from all boot devices
>>> ### ERROR ### Please RESET the board ###
>>>
>>> Thanks,
>>> Enric
>>
>>
>> bye,
>> Heiko
>>
>> --
>> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
More information about the U-Boot
mailing list