[U-Boot] [PATCHv2 3/8] dm: lpuart: Drop the legacy code

[Stefan Agner]

On 2016-01-25 09:03, Bhuvanchandra DV wrote:
> All boards using this driver are with device tree support,
> hence drop the legacy code in driver to have a pure DT solution.

Hm, dropping the legacy code at this point probably leads to a broken
state (bisectability...)

I would recommend to first move the boards to device tree and then drop
legacy stuff... Probably along these lines:

  arm: vybrid: Enable lpuart support
  arm: colibri-vf: Enable serial support
  arm: vybrid: Drop enabling gpio, uart and spi in legacy mode
  arm: vf610-twr: Add device tree files
  arm: pcm052: Add device tree files
  arm: vybrid: Update defconfig's
  dm: lpuart: Drop the legacy code
  dm: vybrid_gpio: Drop legacy code

--
Stefan

> 
> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv at toradex.com>
> Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
> ---
>  drivers/serial/serial_lpuart.c | 101 +----------------------------------------
>  1 file changed, 2 insertions(+), 99 deletions(-)
> 
> diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c
> index 3f9c4d1..fc3321f 100644
> --- a/drivers/serial/serial_lpuart.c
> +++ b/drivers/serial/serial_lpuart.c
> @@ -48,8 +48,6 @@
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> -struct lpuart_fsl *base = (struct lpuart_fsl *)LPUART_BASE;
> -
>  struct lpuart_serial_platdata {
>  	struct lpuart_fsl *reg;
>  };
> @@ -127,43 +125,6 @@ static int _lpuart_serial_init(struct lpuart_fsl *base)
>  	return 0;
>  }
>  
> -#ifndef CONFIG_DM_SERIAL
> -static void lpuart_serial_setbrg(void)
> -{
> -	_lpuart_serial_setbrg(base, gd->baudrate);
> -}
> -
> -static int lpuart_serial_getc(void)
> -{
> -	return _lpuart_serial_getc(base);
> -}
> -
> -static void lpuart_serial_putc(const char c)
> -{
> -	_lpuart_serial_putc(base, c);
> -}
> -
> -static int lpuart_serial_tstc(void)
> -{
> -	return _lpuart_serial_tstc(base);
> -}
> -
> -static int lpuart_serial_init(void)
> -{
> -	return _lpuart_serial_init(base);
> -}
> -
> -static struct serial_device lpuart_serial_drv = {
> -	.name = "lpuart_serial",
> -	.start = lpuart_serial_init,
> -	.stop = NULL,
> -	.setbrg = lpuart_serial_setbrg,
> -	.putc = lpuart_serial_putc,
> -	.puts = default_serial_puts,
> -	.getc = lpuart_serial_getc,
> -	.tstc = lpuart_serial_tstc,
> -};
> -#else /* CONFIG_DM_SERIAL */
>  static int lpuart_serial_setbrg(struct udevice *dev, int baudrate)
>  {
>  	struct lpuart_serial_platdata *plat = dev->platdata;
> @@ -210,8 +171,8 @@ static int lpuart_serial_probe(struct udevice *dev)
>  
>  	return _lpuart_serial_init(reg);
>  }
> -#endif /* CONFIG_DM_SERIAL */
>  #else
> +
>  static void _lpuart32_serial_setbrg(struct lpuart_fsl *base, int baudrate)
>  {
>  	u32 clk = CONFIG_SYS_CLK_FREQ;
> @@ -281,43 +242,6 @@ static int _lpuart32_serial_init(struct lpuart_fsl *base)
>  	return 0;
>  }
>  
> -#ifndef CONFIG_DM_SERIAL
> -static void lpuart32_serial_setbrg(void)
> -{
> -	_lpuart32_serial_setbrg(base, gd->baudrate);
> -}
> -
> -static int lpuart32_serial_getc(void)
> -{
> -	return _lpuart32_serial_getc(base);
> -}
> -
> -static void lpuart32_serial_putc(const char c)
> -{
> -	_lpuart32_serial_putc(base, c);
> -}
> -
> -static int lpuart32_serial_tstc(void)
> -{
> -	return _lpuart32_serial_tstc(base);
> -}
> -
> -static int lpuart32_serial_init(void)
> -{
> -	return _lpuart32_serial_init(base);
> -}
> -
> -static struct serial_device lpuart32_serial_drv = {
> -	.name = "lpuart32_serial",
> -	.start = lpuart32_serial_init,
> -	.stop = NULL,
> -	.setbrg = lpuart32_serial_setbrg,
> -	.putc = lpuart32_serial_putc,
> -	.puts = default_serial_puts,
> -	.getc = lpuart32_serial_getc,
> -	.tstc = lpuart32_serial_tstc,
> -};
> -#else /* CONFIG_DM_SERIAL */
>  static int lpuart32_serial_setbrg(struct udevice *dev, int baudrate)
>  {
>  	struct lpuart_serial_platdata *plat = dev->platdata;
> @@ -364,28 +288,8 @@ static int lpuart32_serial_probe(struct udevice *dev)
>  
>  	return _lpuart32_serial_init(reg);
>  }
> -#endif /* CONFIG_DM_SERIAL */
> -#endif
> -
> -#ifndef CONFIG_DM_SERIAL
> -void lpuart_serial_initialize(void)
> -{
> -#ifdef CONFIG_LPUART_32B_REG
> -	serial_register(&lpuart32_serial_drv);
> -#else
> -	serial_register(&lpuart_serial_drv);
> -#endif
> -}
> +#endif /* CONFIG_LPUART_32B_REG */
>  
> -__weak struct serial_device *default_serial_console(void)
> -{
> -#ifdef CONFIG_LPUART_32B_REG
> -	return &lpuart32_serial_drv;
> -#else
> -	return &lpuart_serial_drv;
> -#endif
> -}
> -#else /* CONFIG_DM_SERIAL */
>  static int lpuart_serial_ofdata_to_platdata(struct udevice *dev)
>  {
>  	struct lpuart_serial_platdata *plat = dev->platdata;
> @@ -447,4 +351,3 @@ U_BOOT_DRIVER(serial_lpuart32) = {
>  	.flags = DM_FLAG_PRE_RELOC,
>  };
>  #endif /* CONFIG_LPUART_32B_REG */
> -#endif /* CONFIG_DM_SERIAL */