[U-Boot] [PATCH 0/7] fdt: Replace u-boot-dtb.bin with u-boot.bin

[Simon Glass]

At present u-boot.bin holds the plain U-Boot binary without the device tree.
This is somewhat annoying since you need either u-boot.bin or u-boot-dtb.bin
depending on whether device tree is used.

This series adjusts the build such that u-boot.bin includes a device tree,
and the plain binary is in u-boot-nodtb.bin. For now u-boot-dtb.bin remains
the same.

This should be acceptable since:

- without OF_CONTROL, u-boot.bin still does not include a device tree
- with OF_CONTROL, u-boot-dtb.bin does not change

The main impact is build systems which are set up to use u-boot.bin as
the output file and then add a device tree. These will have to change to use
u-boot-nodtb.bin instead.

The original decision to use a separate u-boot-dtb.bin was aimed at allowing
any device tree file to be concatenated to the u-boot.bin image after the
build. However this no-longer seems so important. More important is the
convenience of using the same output file regardless of the setting for
OF_CONTROL.


Simon Glass (7):
  tegra: Drop generation of -nodtb file with OF_CONTROL
  fdt: Build a U-Boot binary without device tree
  fdt: Build an SPL binary without device tree
  tegra: Always build a boot image with the same filename
  socfpga: Simplify Makefile filenames
  Makefile: Make u-boot.img the same as u-boot-dtb.img
  Makefile: Drop unnecessary -dtb suffixes

 Makefile             | 67 ++++++++++++++++++++++++++--------------------------
 scripts/Makefile.spl | 26 +++++++++++++-------
 2 files changed, 50 insertions(+), 43 deletions(-)

-- 
2.7.0.rc3.207.g0ac5344