[U-Boot] [PATCH 2/2 v3] board/t4240rdb: VID support

[york sun]

On 01/21/2016 09:48 PM, ying.zhang at freescale.com wrote:
> From: Ying Zhang <b40530 at freescale.com>
> 
> The fuse status register provides the values from on-chip
> voltage ID efuses programmed at the factory.
> These values define the voltage requirements for
> the chip. u-boot reads FUSESR and translates the values
> into the appropriate commands to set the voltage output
> value of an external voltage regulator.
> 
> Signed-off-by: Ying Zhang <b40530 at freescale.com>
> ---
> Changed from v2:
>     - Split the Intel mode support patch
> Changed from v1:
>     - Not support IR chip is used in AMD mode
> ---

Revised subject and slightly reformat commit message

powerpc/board/t4240rdb: Enable VID support

The fuse status register provides the values from on-chip
voltage ID efuses programmed at the factory. These values
define the voltage requirements for the chip. u-boot reads
FUSESR and translates the values into the appropriate
commands to set the voltage output value of an external
voltage regulator.

Applied to u-boot-mpc85xx master branch. Awaiting upstream.

Thanks.

York