[U-Boot] [PATCHv3 4/9] arm: vybrid: Drop enabling GPIO, SPI and UART in legacy mode

Bhuvanchandra DV bhuvanchandra.dv at toradex.com
Tue Jan 26 10:46:04 CET 2016


Remove the legacy way of enabling GPIO, SPI and UART on Vybrid
based boards since these driver's now only supports DT mode.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv at toradex.com>
---
 include/configs/colibri_vf.h | 13 -------------
 include/configs/pcm052.h     |  3 ---
 include/configs/vf610twr.h   |  3 ---
 3 files changed, 19 deletions(-)

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 5aed3a5..6efff76 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -36,13 +36,10 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
-#define LPUART_BASE			UART0_BASE
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_VERSION_VARIABLE
-#define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_CMD_ASKENV
 
@@ -52,10 +49,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR
 
-/* GPIO support */
-#define CONFIG_DM_GPIO
-#define CONFIG_VYBRID_GPIO
-
 /* Dynamic MTD partition support */
 #define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
 #define CONFIG_MTD_PARTITIONS
@@ -265,10 +258,4 @@
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_CMD_USB_MASS_STORAGE
 
-/* Enable SPI support */
-#ifdef CONFIG_OF_CONTROL
-#define CONFIG_DM_SPI
-#define CONFIG_CMD_SPI
-#endif
-
 #endif /* __CONFIG_H */
diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
index 891bdb0..f3353f2 100644
--- a/include/configs/pcm052.h
+++ b/include/configs/pcm052.h
@@ -27,11 +27,8 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
-#define LPUART_BASE			UART1_BASE
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_UART_PORT		(1)
 #define CONFIG_BAUDRATE			115200
 
 #undef CONFIG_CMD_IMLS
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index dcfafaf..84ad2c3 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -34,11 +34,8 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
-#define LPUART_BASE			UART1_BASE
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_UART_PORT		(1)
 #define CONFIG_BAUDRATE			115200
 
 /* NAND support */
-- 
2.7.0



More information about the U-Boot mailing list