[U-Boot] [PATCH 2/2] imx: mx6ul/sx: Fix issue in LCDIF clock dividers calculation

[Ye Li]

The checking with max frequency supported is not correct, because the temp
is calculated by max pre and post dividers. We can decrease any divider to
meet the max frequency limitation. Actually, the calculation below the codes
is doing this way to find best pre and post dividers.

Signed-off-by: Ye Li <ye.li at nxp.com>
---
 arch/arm/cpu/armv7/mx6/clock.c |    4 ----
 1 files changed, 0 insertions(+), 4 deletions(-)

diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index 007204d..88380a6 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -638,10 +638,6 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
 	}
 
 	temp = freq * max_pred * max_postd;
-	if (temp > max) {
-		puts("Please decrease freq, too large!\n");
-		return;
-	}
 	if (temp < min) {
 		/*
 		 * Register: PLL_VIDEO
-- 
1.7.4.1