[U-Boot] [PATCHv3 4/9] arm: vybrid: Drop enabling GPIO, SPI and UART in legacy mode

Stefan Agner stefan at agner.ch
Tue Jan 26 17:23:51 CET 2016


On 2016-01-26 01:46, Bhuvanchandra DV wrote:
> Remove the legacy way of enabling GPIO, SPI and UART on Vybrid
> based boards since these driver's now only supports DT mode.
> 
> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv at toradex.com>

Acked-by: Stefan Agner <stefan.agner at toradex.com>

> ---
>  include/configs/colibri_vf.h | 13 -------------
>  include/configs/pcm052.h     |  3 ---
>  include/configs/vf610twr.h   |  3 ---
>  3 files changed, 19 deletions(-)
> 
> diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
> index 5aed3a5..6efff76 100644
> --- a/include/configs/colibri_vf.h
> +++ b/include/configs/colibri_vf.h
> @@ -36,13 +36,10 @@
>  
>  #define CONFIG_BOARD_EARLY_INIT_F
>  
> -#define LPUART_BASE			UART0_BASE
> -
>  /* Allow to overwrite serial and ethaddr */
>  #define CONFIG_ENV_OVERWRITE
>  #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
>  #define CONFIG_VERSION_VARIABLE
> -#define CONFIG_SYS_UART_PORT		(0)
>  #define CONFIG_BAUDRATE			115200
>  #define CONFIG_CMD_ASKENV
>  
> @@ -52,10 +49,6 @@
>  #define CONFIG_SYS_MAX_NAND_DEVICE	1
>  #define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR
>  
> -/* GPIO support */
> -#define CONFIG_DM_GPIO
> -#define CONFIG_VYBRID_GPIO
> -
>  /* Dynamic MTD partition support */
>  #define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
>  #define CONFIG_MTD_PARTITIONS
> @@ -265,10 +258,4 @@
>  #define CONFIG_USB_FUNCTION_MASS_STORAGE
>  #define CONFIG_CMD_USB_MASS_STORAGE
>  
> -/* Enable SPI support */
> -#ifdef CONFIG_OF_CONTROL
> -#define CONFIG_DM_SPI
> -#define CONFIG_CMD_SPI
> -#endif
> -
>  #endif /* __CONFIG_H */
> diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
> index 891bdb0..f3353f2 100644
> --- a/include/configs/pcm052.h
> +++ b/include/configs/pcm052.h
> @@ -27,11 +27,8 @@
>  
>  #define CONFIG_BOARD_EARLY_INIT_F
>  
> -#define LPUART_BASE			UART1_BASE
> -
>  /* Allow to overwrite serial and ethaddr */
>  #define CONFIG_ENV_OVERWRITE
> -#define CONFIG_SYS_UART_PORT		(1)
>  #define CONFIG_BAUDRATE			115200
>  
>  #undef CONFIG_CMD_IMLS
> diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
> index dcfafaf..84ad2c3 100644
> --- a/include/configs/vf610twr.h
> +++ b/include/configs/vf610twr.h
> @@ -34,11 +34,8 @@
>  
>  #define CONFIG_BOARD_EARLY_INIT_F
>  
> -#define LPUART_BASE			UART1_BASE
> -
>  /* Allow to overwrite serial and ethaddr */
>  #define CONFIG_ENV_OVERWRITE
> -#define CONFIG_SYS_UART_PORT		(1)
>  #define CONFIG_BAUDRATE			115200
>  
>  /* NAND support */


More information about the U-Boot mailing list