[U-Boot] [PATCH v2 0/2] net: phy: mv88e61xx: Revise as a PHY driver

Kevin Smith kevin.smith at elecsyscorp.com
Tue Jan 26 17:56:21 CET 2016


Hi Albert,

On 01/26/2016 10:13 AM, Joe Hershberger wrote:
> Hi Albert,
>
> On Tue, Jan 26, 2016 at 10:09 AM, Albert ARIBAUD
> <albert.u.boot at aribaud.net> wrote:
>> Hello Kevin,
>>
>> On Mon, 21 Dec 2015 21:45:32 +0000, Kevin Smith
>> <kevin.smith at elecsyscorp.com> wrote:
>>> The previous version of this driver implemented a shell command to manually
>>> comfigure the switch.  It did not integrate with the PHY infrastructure to
>>> allow a MAC to use it as its PHY.  This is a complete rewrite to allow this
>>> switch to function as a driver.  Since none of the original driver remains, the
>>> old driver is first removed and the new PHY driver is added.
>>>
>>> This version configures the switch to have a CPU connected over an MII
>>> interface.  It will enable PHY interfaces based on the MV88E61XX_PHY_PORTS
>>> macro.  The switch is configured to allow PHY ports to only communicate to the
>>> CPU.  This allows the switch to be used as a basic PHY on any/all ports.
>>>
>>> This was developed on a board with an mv88e6176 connected over SGMII.  It is
>>> intended to work with other configurations, but these could not be tested.  Any
>>> testing on other configurations or with other mv88e61xx chips is appreciated.
>> Actually the driver was for the Wireless Space, which was removed but
>> which I will resurrect as I did the Open-RDs. I will test the switch on
>> the WS I have.
> That's great. I'm currently reviewing the new driver and will
> appreciate the testing. I don't have any boards with this switch.
>
> Thanks,
> -Joe
Could you please send me more info on the Wireless Space board?  I would 
like something other than our custom board to test this on.  I tried to 
get a Marvell RD-A370, but they are too expensive.  I will be glad to 
add back in the command-line interface for configuring this board if it 
is needed to support your work.

Thanks for testing,
Kevin

P.S.  I did not receive your e-mail at my business address somehow; I 
added my personal e-mail to ensure I get your responses.


More information about the U-Boot mailing list