[U-Boot] [PATCH 3/4] distro bootcmd: enumerate PCI before network operations

[Stephen Warren]

From: Stephen Warren <swarren at nvidia.com>

The PCI bus must be enumerated before PCI devices, such as Ethernet
devices, are known to U-Boot. Enhance the distro boot commands to perform
PCI enumeration when needed.

Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
 doc/README.distro               |  8 ++++++++
 include/config_distro_bootcmd.h | 12 ++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/doc/README.distro b/doc/README.distro
index 019903ea7d91..3715c8c3bad7 100644
--- a/doc/README.distro
+++ b/doc/README.distro
@@ -349,6 +349,14 @@ boot_net_usb_start:
   device is not attached to USB, and you wish to increase boot speed by
   avoiding unnecessary actions.
 
+boot_net_pci_enum:
+
+  If you want to prevent PCI enumeration by distro boot commands which execute
+  network operations, set the value to something innocuous, e.g. setenv
+  boot_net_pci_enum true. This would be useful if you know your Ethernet
+  device is not attached to PCI, and you wish to increase boot speed by
+  avoiding unnecessary actions.
+
 Interactively booting from a specific device at the u-boot prompt
 =================================================================
 
diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index c027d8643967..37c6b438e29f 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -139,6 +139,15 @@
 	BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE
 #endif
 
+#if defined(CONFIG_CMD_PCI_ENUM) || defined(CONFIG_DM_PCI)
+#define BOOTENV_RUN_NET_PCI_ENUM "run boot_net_pci_enum; "
+#define BOOTENV_SHARED_PCI \
+	"boot_net_pci_enum=pci enum\0"
+#else
+#define BOOTENV_RUN_NET_PCI_ENUM
+#define BOOTENV_SHARED_PCI
+#endif
+
 #ifdef CONFIG_CMD_USB
 #define BOOTENV_RUN_NET_USB_START "run boot_net_usb_start; "
 #define BOOTENV_SHARED_USB \
@@ -161,6 +170,7 @@
 #define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \
 	"bootcmd_dhcp=" \
 		BOOTENV_RUN_NET_USB_START \
+		BOOTENV_RUN_NET_PCI_ENUM \
 		"if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \
 			"source ${scriptaddr}; " \
 		"fi\0"
@@ -177,6 +187,7 @@
 #define BOOTENV_DEV_PXE(devtypeu, devtypel, instance) \
 	"bootcmd_pxe=" \
 		BOOTENV_RUN_NET_USB_START \
+		BOOTENV_RUN_NET_PCI_ENUM \
 		"dhcp; " \
 		"if pxe get; then " \
 			"pxe boot; " \
@@ -200,6 +211,7 @@
 #define BOOTENV \
 	BOOTENV_SHARED_HOST \
 	BOOTENV_SHARED_MMC \
+	BOOTENV_SHARED_PCI \
 	BOOTENV_SHARED_USB \
 	BOOTENV_SHARED_SATA \
 	BOOTENV_SHARED_SCSI \
-- 
2.7.0