[U-Boot] [PATCH] serial: serial_stm32: move clock config from driver to board
Vikas Manocha
vikas.manocha at st.com
Wed Jan 27 03:12:20 CET 2016
This patch removes the uart clock enable from serial driver & move it in the
board code.
Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
---
arch/arm/include/asm/arch-stm32f4/stm32_defs.h | 15 ++++++++
arch/arm/include/asm/arch-stm32f4/stm32_periph.h | 27 +++++++++++++++
arch/arm/mach-stm32/stm32f4/clock.c | 20 +++++++++++
board/st/stm32f429-discovery/stm32f429-discovery.c | 3 ++
drivers/serial/serial_stm32.c | 40 ----------------------
5 files changed, 65 insertions(+), 40 deletions(-)
create mode 100644 arch/arm/include/asm/arch-stm32f4/stm32_defs.h
create mode 100644 arch/arm/include/asm/arch-stm32f4/stm32_periph.h
diff --git a/arch/arm/include/asm/arch-stm32f4/stm32_defs.h b/arch/arm/include/asm/arch-stm32f4/stm32_defs.h
new file mode 100644
index 0000000..29b98ae
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f4/stm32_defs.h
@@ -0,0 +1,15 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha at st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __STM32_DEFS_H__
+#define __STM32_DEFS_H__
+#include <asm/arch/stm32_periph.h>
+
+int clock_setup(enum periph_clock);
+
+#endif
+
diff --git a/arch/arm/include/asm/arch-stm32f4/stm32_periph.h b/arch/arm/include/asm/arch-stm32f4/stm32_periph.h
new file mode 100644
index 0000000..a1af25c
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f4/stm32_periph.h
@@ -0,0 +1,27 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha at st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_PERIPH_H
+#define __ASM_ARM_ARCH_PERIPH_H
+
+/*
+ * Peripherals required for pinmux configuration. List will
+ * grow with support for more devices getting added.
+ * Numbering based on interrupt table.
+ *
+ */
+enum periph_id {
+ UART1_GPIOA_9_10 = 0,
+ UART2_GPIOD_5_6,
+};
+
+enum periph_clock {
+ USART1_CLOCK_CFG = 0,
+ USART2_CLOCK_CFG,
+};
+
+#endif /* __ASM_ARM_ARCH_PERIPH_H */
diff --git a/arch/arm/mach-stm32/stm32f4/clock.c b/arch/arm/mach-stm32/stm32f4/clock.c
index 3deb17a..576d3e6 100644
--- a/arch/arm/mach-stm32/stm32f4/clock.c
+++ b/arch/arm/mach-stm32/stm32f4/clock.c
@@ -11,6 +11,7 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/stm32.h>
+#include <asm/arch/stm32_periph.h>
#define RCC_CR_HSION (1 << 0)
#define RCC_CR_HSEON (1 << 16)
@@ -50,6 +51,14 @@
#define RCC_APB1ENR_PWREN (1 << 28)
+/*
+ * RCC USART specific definitions
+ */
+#define RCC_ENR_USART1EN (1 << 4)
+#define RCC_ENR_USART2EN (1 << 17)
+#define RCC_ENR_USART3EN (1 << 18)
+#define RCC_ENR_USART6EN (1 << 5)
+
#define PWR_CR_VOS0 (1 << 14)
#define PWR_CR_VOS1 (1 << 15)
#define PWR_CR_VOS_MASK 0xC000
@@ -221,3 +230,14 @@ unsigned long clock_get(enum clock clck)
break;
}
}
+
+void clock_setup(int peripheral)
+{
+ switch (peripheral) {
+ case USART1_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->apb2enr, RCC_ENR_USART1EN);
+ break;
+ default:
+ break;
+ }
+}
diff --git a/board/st/stm32f429-discovery/stm32f429-discovery.c b/board/st/stm32f429-discovery/stm32f429-discovery.c
index 8bc2d9e..fb8475f 100644
--- a/board/st/stm32f429-discovery/stm32f429-discovery.c
+++ b/board/st/stm32f429-discovery/stm32f429-discovery.c
@@ -19,6 +19,8 @@
#include <asm/arch/fmc.h>
#include <dm/platdata.h>
#include <dm/platform_data/serial_stm32.h>
+#include <asm/arch/stm32_periph.h>
+#include <asm/arch/stm32_defs.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -286,6 +288,7 @@ int board_early_init_f(void)
res = uart_setup_gpio();
if (res)
return res;
+ clock_setup(USART1_CLOCK_CFG);
return 0;
}
diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c
index 91a5dde..c793ba6 100644
--- a/drivers/serial/serial_stm32.c
+++ b/drivers/serial/serial_stm32.c
@@ -35,24 +35,6 @@ struct stm32_usart {
DECLARE_GLOBAL_DATA_PTR;
-#define MAX_SERIAL_PORTS 4
-
-/*
- * RCC USART specific definitions
- */
-#define RCC_ENR_USART1EN (1 << 4)
-#define RCC_ENR_USART2EN (1 << 17)
-#define RCC_ENR_USART3EN (1 << 18)
-#define RCC_ENR_USART6EN (1 << 5)
-
-/* Array used to figure out which RCC bit needs to be set */
-static const unsigned long usart_port_rcc_pairs[MAX_SERIAL_PORTS][2] = {
- { STM32_USART1_BASE, RCC_ENR_USART1EN },
- { STM32_USART2_BASE, RCC_ENR_USART2EN },
- { STM32_USART3_BASE, RCC_ENR_USART3EN },
- { STM32_USART6_BASE, RCC_ENR_USART6EN }
-};
-
static int stm32_serial_setbrg(struct udevice *dev, int baudrate)
{
struct stm32_serial_platdata *plat = dev->platdata;
@@ -114,28 +96,6 @@ static int stm32_serial_probe(struct udevice *dev)
{
struct stm32_serial_platdata *plat = dev->platdata;
struct stm32_usart *const usart = plat->base;
- int usart_port = -1;
- int i;
-
- for (i = 0; i < MAX_SERIAL_PORTS; i++) {
- if ((u32)usart == usart_port_rcc_pairs[i][0]) {
- usart_port = i;
- break;
- }
- }
-
- if (usart_port == -1)
- return -EINVAL;
-
- if (((u32)usart & STM32_BUS_MASK) == STM32_APB1PERIPH_BASE)
- setbits_le32(&STM32_RCC->apb1enr,
- usart_port_rcc_pairs[usart_port][1]);
- else if (((u32)usart & STM32_BUS_MASK) == STM32_APB2PERIPH_BASE)
- setbits_le32(&STM32_RCC->apb2enr,
- usart_port_rcc_pairs[usart_port][1]);
- else
- return -EINVAL;
-
setbits_le32(&usart->cr1, USART_CR1_RE | USART_CR1_TE | USART_CR1_UE);
return 0;
--
1.9.1
More information about the U-Boot
mailing list