[U-Boot] [PATCH] armv8: ls2080ardb: invert irq pins polarity for AQR405 PHY

shh.xie at gmail.com shh.xie at gmail.com
Wed Jan 27 07:38:05 CET 2016


From: Shaohui Xie <Shaohui.Xie at nxp.com>

To use AQR405 PHY's interrupt, we need to invert the relative IRQ pins
polarity by setting IRQCR register, because AQR405 interrupt is low active
but GIC accepts high active.

Signed-off-by: Shaohui Xie <Shaohui.Xie at nxp.com>
---
 board/freescale/ls2080ardb/ls2080ardb.c | 4 ++++
 include/configs/ls2080a_common.h        | 4 ++++
 include/configs/ls2080ardb.h            | 1 +
 3 files changed, 9 insertions(+)

diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 2ae9d6c..da227a7 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -149,6 +149,7 @@ int board_init(void)
 {
 	char *env_hwconfig;
 	u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
+	u32 __iomem *irq_ccsr = (u32 __iomem *)ISC_BASE;
 	u32 val;
 
 	init_final_memctl_regs();
@@ -170,6 +171,9 @@ int board_init(void)
 
 	QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN);
 
+	/* invert AQR405 IRQ pins polarity */
+	out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR405_IRQ_MASK);
+
 	return 0;
 }
 
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 2e1fe7a..1740dd6 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -38,6 +38,10 @@
 #define CONFIG_SYS_TEXT_BASE		0x30100000
 #endif
 
+/* Interrupt Sampling Control */
+#define ISC_BASE		0x01F70000
+#define IRQCR_OFFSET		0x14
+
 #ifdef CONFIG_EMU
 #define CONFIG_SYS_NO_FLASH
 #endif
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 65d4f64..0d60420 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -336,6 +336,7 @@ unsigned long get_board_sys_clk(void);
 #define AQ_PHY_ADDR2		0x01
 #define AQ_PHY_ADDR3		0x02
 #define AQ_PHY_ADDR4		0x03
+#define AQR405_IRQ_MASK		0x36
 
 #define CONFIG_MII
 #define CONFIG_ETHPRIME		"DPNI1"
-- 
2.1.0.27.g96db324



More information about the U-Boot mailing list