[U-Boot] [PATCH 00/14] Add Support for Secure Boot on LS208x

[Saksham Jain]

Secure Boot ESBC has been enabled on FSL LS208x platforms.
This patchset is dependent on
http://patchwork.ozlabs.org/patch/571612/

Saksham Jain (14):
  armv8: ls2080: Add SFP Configs for LS2080/LS2085
  armv8: ls2080: Add Secure Boot configs: SEC, Security Monitor, SRK and
    RCW
  SECURE BOOT: Add new ESBC header for ls-ch3 Secure Boot
  SECURE BOOT: Add Secure Boot support on ls2080aqds/rdb
  armv8: fsl-lsch3: Add bootscript header address for Secure Boot
  SECURE BOOT: Copy Bootscript and header from NOR to DDR for LS2080/5
  SECURE BOOT: Change env variable "fdt_high" for LS2080a and LS2085a
  armv8 : ls2080: Add config for endianess of CCSR GUR
  armv8: fsl-lsch3: Disable SMMU during Secure Boot
  crypto/fsl: Correct 64bit Write when MMU disabled
  crypto/fsl: Make CAAM transactions cacheable
  SECURE_BOOT: Use default bootargs during Secure Boot
  SECURE BOOT: Halt execution when secure boot fail after reset request
  SECURE_BOOT: Enable IE (Key extention) Feature in Ls2085a & LS2088a

 arch/arm/cpu/armv8/fsl-layerscape/soc.c            |  18 ++-
 arch/arm/include/asm/arch-fsl-layerscape/config.h  |  18 +++
 .../include/asm/arch-fsl-layerscape/immap_lsch3.h  |  28 ++++
 arch/arm/include/asm/fsl_secure_boot.h             |  45 ++++++-
 board/freescale/common/cmd_esbc_validate.c         |   2 +-
 board/freescale/common/fsl_validate.c              | 149 ++++++++++++++++++---
 board/freescale/ls2080aqds/ls2080aqds.c            |   5 +-
 board/freescale/ls2080ardb/ls2080ardb.c            |   5 +-
 configs/ls2080aqds_SECURE_BOOT_defconfig           |  15 +++
 configs/ls2080ardb_SECURE_BOOT_defconfig           |  15 +++
 configs/ls2085aqds_SECURE_BOOT_defconfig           |  15 +++
 configs/ls2085ardb_SECURE_BOOT_defconfig           |  15 +++
 drivers/crypto/fsl/desc_constr.h                   |   7 +-
 drivers/crypto/fsl/jr.c                            |  13 ++
 drivers/crypto/fsl/jr.h                            |   3 +
 include/config_fsl_chain_trust.h                   |  25 ++--
 include/configs/ls2080aqds.h                       |   2 +
 include/configs/ls2080ardb.h                       |   2 +
 include/fsl_secboot_err.h                          |   3 +
 include/fsl_sfp.h                                  |   3 +-
 include/fsl_validate.h                             |  84 ++++++++++--
 21 files changed, 422 insertions(+), 50 deletions(-)
 create mode 100644 configs/ls2080aqds_SECURE_BOOT_defconfig
 create mode 100644 configs/ls2080ardb_SECURE_BOOT_defconfig
 create mode 100644 configs/ls2085aqds_SECURE_BOOT_defconfig
 create mode 100644 configs/ls2085ardb_SECURE_BOOT_defconfig

-- 
1.8.1.4