[U-Boot] [PATCH] pci: gate print info of reading vender id with CONFIG_DM_PCI

[Bin Meng]

On Thu, Jan 28, 2016 at 3:15 PM, Gong Qianyu <Qianyu.Gong at nxp.com> wrote:
> From: Mingkai Hu <Mingkai.Hu at freescale.com>
>
> Referring to 'commit ff3e077bd23c ("dm: pci: Add a uclass for PCI")'.
>
> For legacy PCIe driver, it needs loop to read the vender_id from
> devie 0 to devie 255 to check if there is device available.
> Reading non-existen device will trigger the "Cannot read bus
> configuration: -1" information.
>
> Signed-off-by: Mingkai Hu <Mingkai.Hu at freescale.com>
> Signed-off-by: Gong Qianyu <Qianyu.Gong at nxp.com>
> ---

Which pci controller are you testing?

[snip]

Regards,
Bin