[U-Boot] [PATCH v4 02/13] drivers: clk: Add clock driver for Microchip PIC32 Microcontroller.
Purna Chandra Mandal
purna.mandal at microchip.com
Thu Jan 28 11:00:11 CET 2016
PIC32 clock module consists of multiple oscillators, PLLs, mutiplexers
and dividers capable of supplying clock to various controllers
on or off-chip.
Signed-off-by: Purna Chandra Mandal <purna.mandal at microchip.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
---
Changes in v4: None
Changes in v3:
- rename clk-pic32.c to clk_pic32.c
- update clock binding documentation
- replace pic32_ioremap() with ioremap()
- separate MPLL initialization constants
Changes in v2:
- add mpll get clock rate
.../clock/microchip,pic32-clock.txt | 33 ++
drivers/clk/Makefile | 1 +
drivers/clk/clk_pic32.c | 433 +++++++++++++++++++++
include/dt-bindings/clock/microchip,clock.h | 29 ++
4 files changed, 496 insertions(+)
create mode 100644 doc/device-tree-bindings/clock/microchip,pic32-clock.txt
create mode 100644 drivers/clk/clk_pic32.c
create mode 100644 include/dt-bindings/clock/microchip,clock.h
diff --git a/doc/device-tree-bindings/clock/microchip,pic32-clock.txt b/doc/device-tree-bindings/clock/microchip,pic32-clock.txt
new file mode 100644
index 0000000..f185ce0
--- /dev/null
+++ b/doc/device-tree-bindings/clock/microchip,pic32-clock.txt
@@ -0,0 +1,33 @@
+* Microchip PIC32 Clock and Oscillator
+
+Microchip PIC32 clock tree consists of few oscillators, PLLs,
+multiplexers and few divider modules capable of supplying clocks
+to various controllers within SoC and also to off-chip.
+
+PIC32 clock controller output is defined by indices as defined
+in [0]
+
+[0] include/dt-bindings/clock/microchip,clock.h
+
+Required Properties:
+- compatible: should be "microchip,pic32mzda_clk"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+
+Example: Clock controller node:
+
+ clock: clk at 1f801200 {
+ compatible = "microchip,pic32mzda-clk";
+ reg = <0x1f801200 0x1000>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+controller:
+
+ uart1: serial at 1f822000 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <0xbf822000 0x50>;
+ interrupts = <112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock PB2CLK>;
+ };
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 8aa81f4..c9144e3 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_CLK) += clk-uclass.o clk_fixed_rate.o
obj-$(CONFIG_ROCKCHIP_RK3036) += clk_rk3036.o
obj-$(CONFIG_ROCKCHIP_RK3288) += clk_rk3288.o
obj-$(CONFIG_SANDBOX) += clk_sandbox.o
+obj-$(CONFIG_MACH_PIC32) += clk_pic32.o
diff --git a/drivers/clk/clk_pic32.c b/drivers/clk/clk_pic32.c
new file mode 100644
index 0000000..5d88354
--- /dev/null
+++ b/drivers/clk/clk_pic32.c
@@ -0,0 +1,433 @@
+/*
+ * Copyright (C) 2015 Purna Chandra Mandal <purna.mandal at microchip.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <div64.h>
+#include <wait_bit.h>
+#include <dm/lists.h>
+#include <asm/io.h>
+#include <mach/pic32.h>
+#include <dt-bindings/clock/microchip,clock.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Primary oscillator */
+#define SYS_POSC_CLK_HZ 24000000
+
+/* FRC clk rate */
+#define SYS_FRC_CLK_HZ 8000000
+
+/* Clock Registers */
+#define OSCCON 0x0000
+#define OSCTUNE 0x0010
+#define SPLLCON 0x0020
+#define REFO1CON 0x0080
+#define REFO1TRIM 0x0090
+#define PB1DIV 0x0140
+
+/* SPLL */
+#define ICLK_MASK 0x00000080
+#define PLLIDIV_MASK 0x00000007
+#define PLLODIV_MASK 0x00000007
+#define CUROSC_MASK 0x00000007
+#define PLLMUL_MASK 0x0000007F
+#define FRCDIV_MASK 0x00000007
+
+/* PBCLK */
+#define PBDIV_MASK 0x00000007
+
+/* SYSCLK MUX */
+#define SCLK_SRC_FRC1 0
+#define SCLK_SRC_SPLL 1
+#define SCLK_SRC_POSC 2
+#define SCLK_SRC_FRC2 7
+
+/* Reference Oscillator Control Reg fields */
+#define REFO_SEL_MASK 0x0f
+#define REFO_SEL_SHIFT 0
+#define REFO_ACTIVE BIT(8)
+#define REFO_DIVSW_EN BIT(9)
+#define REFO_OE BIT(12)
+#define REFO_ON BIT(15)
+#define REFO_DIV_SHIFT 16
+#define REFO_DIV_MASK 0x7fff
+
+/* Reference Oscillator Trim Register Fields */
+#define REFO_TRIM_REG 0x10
+#define REFO_TRIM_MASK 0x1ff
+#define REFO_TRIM_SHIFT 23
+#define REFO_TRIM_MAX 511
+
+#define ROCLK_SRC_SCLK 0x0
+#define ROCLK_SRC_SPLL 0x7
+#define ROCLK_SRC_ROCLKI 0x8
+
+/* Memory PLL */
+#define MPLL_IDIV 0x3f
+#define MPLL_MULT 0xff
+#define MPLL_ODIV1 0x7
+#define MPLL_ODIV2 0x7
+#define MPLL_VREG_RDY BIT(23)
+#define MPLL_RDY BIT(31)
+#define MPLL_IDIV_SHIFT 0
+#define MPLL_MULT_SHIFT 8
+#define MPLL_ODIV1_SHIFT 24
+#define MPLL_ODIV2_SHIFT 27
+#define MPLL_IDIV_INIT 0x03
+#define MPLL_MULT_INIT 0x32
+#define MPLL_ODIV1_INIT 0x02
+#define MPLL_ODIV2_INIT 0x01
+
+struct pic32_clk_priv {
+ void __iomem *iobase;
+ void __iomem *syscfg_base;
+};
+
+static ulong pic32_get_pll_rate(struct pic32_clk_priv *priv)
+{
+ u32 iclk, idiv, odiv, mult;
+ ulong plliclk, v;
+
+ v = readl(priv->iobase + SPLLCON);
+ iclk = (v & ICLK_MASK);
+ idiv = ((v >> 8) & PLLIDIV_MASK) + 1;
+ odiv = ((v >> 24) & PLLODIV_MASK);
+ mult = ((v >> 16) & PLLMUL_MASK) + 1;
+
+ plliclk = iclk ? SYS_FRC_CLK_HZ : SYS_POSC_CLK_HZ;
+
+ if (odiv < 2)
+ odiv = 2;
+ else if (odiv < 5)
+ odiv = (1 << odiv);
+ else
+ odiv = 32;
+
+ return ((plliclk / idiv) * mult) / odiv;
+}
+
+static ulong pic32_get_sysclk(struct pic32_clk_priv *priv)
+{
+ ulong v;
+ ulong hz;
+ ulong div, frcdiv;
+ ulong curr_osc;
+
+ /* get clk source */
+ v = readl(priv->iobase + OSCCON);
+ curr_osc = (v >> 12) & CUROSC_MASK;
+ switch (curr_osc) {
+ case SCLK_SRC_FRC1:
+ case SCLK_SRC_FRC2:
+ frcdiv = ((v >> 24) & FRCDIV_MASK);
+ div = ((1 << frcdiv) + 1) + (128 * (frcdiv == 7));
+ hz = SYS_FRC_CLK_HZ / div;
+ break;
+
+ case SCLK_SRC_SPLL:
+ hz = pic32_get_pll_rate(priv);
+ break;
+
+ case SCLK_SRC_POSC:
+ hz = SYS_POSC_CLK_HZ;
+ break;
+
+ default:
+ hz = 0;
+ printf("clk: unknown sclk_src.\n");
+ break;
+ }
+
+ return hz;
+}
+
+static ulong pic32_get_pbclk(struct pic32_clk_priv *priv, int periph)
+{
+ void __iomem *reg;
+ ulong div, clk_freq;
+
+ WARN_ON((periph < PB1CLK) || (periph > PB7CLK));
+
+ clk_freq = pic32_get_sysclk(priv);
+
+ reg = priv->iobase + PB1DIV + (periph - PB1CLK) * 0x10;
+ div = (readl(reg) & PBDIV_MASK) + 1;
+
+ return clk_freq / div;
+}
+
+static ulong pic32_get_cpuclk(struct pic32_clk_priv *priv)
+{
+ return pic32_get_pbclk(priv, PB7CLK);
+}
+
+static ulong pic32_set_refclk(struct pic32_clk_priv *priv, int periph,
+ int parent_rate, int rate, int parent_id)
+{
+ void __iomem *reg;
+ u32 div, trim, v;
+ u64 frac;
+
+ WARN_ON((periph < REF1CLK) || (periph > REF5CLK));
+
+ /* calculate dividers,
+ * rate = parent_rate / [2 * (div + (trim / 512))]
+ */
+ if (parent_rate <= rate) {
+ div = 0;
+ trim = 0;
+ } else {
+ div = parent_rate / (rate << 1);
+ frac = parent_rate;
+ frac <<= 8;
+ do_div(frac, rate);
+ frac -= (u64)(div << 9);
+ trim = (frac >= REFO_TRIM_MAX) ? REFO_TRIM_MAX : (u32)frac;
+ }
+
+ reg = priv->iobase + REFO1CON + (periph - REF1CLK) * 0x20;
+
+ /* disable clk */
+ writel(REFO_ON | REFO_OE, reg + _CLR_OFFSET);
+
+ /* wait till previous src change is active */
+ wait_for_bit(__func__, reg, REFO_DIVSW_EN | REFO_ACTIVE,
+ false, CONFIG_SYS_HZ, false);
+
+ /* parent_id */
+ v = readl(reg);
+ v &= ~(REFO_SEL_MASK << REFO_SEL_SHIFT);
+ v |= (parent_id << REFO_SEL_SHIFT);
+
+ /* apply rodiv */
+ v &= ~(REFO_DIV_MASK << REFO_DIV_SHIFT);
+ v |= (div << REFO_DIV_SHIFT);
+ writel(v, reg);
+
+ /* apply trim */
+ v = readl(reg + REFO_TRIM_REG);
+ v &= ~(REFO_TRIM_MASK << REFO_TRIM_SHIFT);
+ v |= (trim << REFO_TRIM_SHIFT);
+ writel(v, reg + REFO_TRIM_REG);
+
+ /* enable clk */
+ writel(REFO_ON | REFO_OE, reg + _SET_OFFSET);
+
+ /* switch divider */
+ writel(REFO_DIVSW_EN, reg + _SET_OFFSET);
+
+ /* wait for divider switching to complete */
+ return wait_for_bit(__func__, reg, REFO_DIVSW_EN, false,
+ CONFIG_SYS_HZ, false);
+}
+
+static ulong pic32_get_refclk(struct pic32_clk_priv *priv, int periph)
+{
+ u32 rodiv, rotrim, rosel, v, parent_rate;
+ void __iomem *reg;
+ u64 rate64;
+
+ WARN_ON((periph < REF1CLK) || (periph > REF5CLK));
+
+ reg = priv->iobase + REFO1CON + (periph - REF1CLK) * 0x20;
+ v = readl(reg);
+ /* get rosel */
+ rosel = (v >> REFO_SEL_SHIFT) & REFO_SEL_MASK;
+ /* get div */
+ rodiv = (v >> REFO_DIV_SHIFT) & REFO_DIV_MASK;
+
+ /* get trim */
+ v = readl(reg + REFO_TRIM_REG);
+ rotrim = (v >> REFO_TRIM_SHIFT) & REFO_TRIM_MASK;
+
+ if (!rodiv)
+ return 0;
+
+ /* get parent rate */
+ switch (rosel) {
+ case ROCLK_SRC_SCLK:
+ parent_rate = pic32_get_cpuclk(priv);
+ break;
+ case ROCLK_SRC_SPLL:
+ parent_rate = pic32_get_pll_rate(priv);
+ break;
+ default:
+ parent_rate = 0;
+ break;
+ }
+
+ /* Calculation
+ * rate = parent_rate / [2 * (div + (trim / 512))]
+ */
+ if (rotrim) {
+ rodiv <<= 9;
+ rodiv += rotrim;
+ rate64 = parent_rate;
+ rate64 <<= 8;
+ do_div(rate64, rodiv);
+ v = (u32)rate64;
+ } else {
+ v = parent_rate / (rodiv << 1);
+ }
+ return v;
+}
+
+static ulong pic32_get_mpll_rate(struct pic32_clk_priv *priv)
+{
+ u32 v, idiv, mul;
+ u32 odiv1, odiv2;
+ u64 rate;
+
+ v = readl(priv->syscfg_base + CFGMPLL);
+ idiv = v & MPLL_IDIV;
+ mul = (v >> MPLL_MULT_SHIFT) & MPLL_MULT;
+ odiv1 = (v >> MPLL_ODIV1_SHIFT) & MPLL_ODIV1;
+ odiv2 = (v >> MPLL_ODIV2_SHIFT) & MPLL_ODIV2;
+
+ rate = (SYS_POSC_CLK_HZ / idiv) * mul;
+ do_div(rate, odiv1);
+ do_div(rate, odiv2);
+
+ return (ulong)rate;
+}
+
+static int pic32_mpll_init(struct pic32_clk_priv *priv)
+{
+ u32 v, mask;
+
+ /* initialize */
+ v = (MPLL_IDIV_INIT << MPLL_IDIV_SHIFT) |
+ (MPLL_MULT_INIT << MPLL_MULT_SHIFT) |
+ (MPLL_ODIV1_INIT << MPLL_ODIV1_SHIFT) |
+ (MPLL_ODIV2_INIT << MPLL_ODIV2_SHIFT);
+
+ writel(v, priv->syscfg_base + CFGMPLL);
+
+ /* Wait for ready */
+ mask = MPLL_RDY | MPLL_VREG_RDY;
+ return wait_for_bit(__func__, priv->syscfg_base + CFGMPLL, mask,
+ true, get_tbclk(), false);
+}
+
+static void pic32_clk_init(struct udevice *dev)
+{
+ const void *blob = gd->fdt_blob;
+ struct pic32_clk_priv *priv;
+ ulong rate, pll_hz;
+ char propname[50];
+ int i;
+
+ priv = dev_get_priv(dev);
+ pll_hz = pic32_get_pll_rate(priv);
+
+ /* Initialize REFOs as not initialized and enabled on reset. */
+ for (i = REF1CLK; i <= REF5CLK; i++) {
+ snprintf(propname, sizeof(propname),
+ "microchip,refo%d-frequency", i - REF1CLK + 1);
+ rate = fdtdec_get_int(blob, dev->of_offset, propname, 0);
+ if (rate)
+ pic32_set_refclk(priv, i, pll_hz, rate, ROCLK_SRC_SPLL);
+ }
+
+ /* Memory PLL */
+ pic32_mpll_init(priv);
+}
+
+static ulong pic32_clk_get_rate(struct udevice *dev)
+{
+ struct pic32_clk_priv *priv = dev_get_priv(dev);
+
+ return pic32_get_cpuclk(priv);
+}
+
+static ulong pic32_get_periph_rate(struct udevice *dev, int periph)
+{
+ struct pic32_clk_priv *priv = dev_get_priv(dev);
+ ulong rate;
+
+ switch (periph) {
+ case PB1CLK ... PB7CLK:
+ rate = pic32_get_pbclk(priv, periph);
+ break;
+ case REF1CLK ... REF5CLK:
+ rate = pic32_get_refclk(priv, periph);
+ break;
+ case PLLCLK:
+ rate = pic32_get_pll_rate(priv);
+ break;
+ case MPLL:
+ rate = pic32_get_mpll_rate(priv);
+ break;
+ default:
+ rate = 0;
+ break;
+ }
+
+ return rate;
+}
+
+static ulong pic32_set_periph_rate(struct udevice *dev, int periph, ulong rate)
+{
+ struct pic32_clk_priv *priv = dev_get_priv(dev);
+ ulong pll_hz;
+
+ switch (periph) {
+ case REF1CLK ... REF5CLK:
+ pll_hz = pic32_get_pll_rate(priv);
+ pic32_set_refclk(priv, periph, pll_hz, rate, ROCLK_SRC_SPLL);
+ break;
+ default:
+ break;
+ }
+
+ return rate;
+}
+
+static struct clk_ops pic32_pic32_clk_ops = {
+ .get_rate = pic32_clk_get_rate,
+ .set_periph_rate = pic32_set_periph_rate,
+ .get_periph_rate = pic32_get_periph_rate,
+};
+
+static int pic32_clk_probe(struct udevice *dev)
+{
+ struct pic32_clk_priv *priv = dev_get_priv(dev);
+ fdt_addr_t addr;
+ fdt_size_t size;
+
+ addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg", &size);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ priv->iobase = ioremap(addr, size);
+ if (!priv->iobase)
+ return -EINVAL;
+
+ priv->syscfg_base = pic32_get_syscfg_base();
+
+ /* initialize clocks */
+ pic32_clk_init(dev);
+
+ return 0;
+}
+
+static const struct udevice_id pic32_clk_ids[] = {
+ { .compatible = "microchip,pic32mzda-clk"},
+ {}
+};
+
+U_BOOT_DRIVER(pic32_clk) = {
+ .name = "pic32_clk",
+ .id = UCLASS_CLK,
+ .of_match = pic32_clk_ids,
+ .flags = DM_FLAG_PRE_RELOC,
+ .ops = &pic32_pic32_clk_ops,
+ .probe = pic32_clk_probe,
+ .priv_auto_alloc_size = sizeof(struct pic32_clk_priv),
+};
diff --git a/include/dt-bindings/clock/microchip,clock.h b/include/dt-bindings/clock/microchip,clock.h
new file mode 100644
index 0000000..93c222d
--- /dev/null
+++ b/include/dt-bindings/clock/microchip,clock.h
@@ -0,0 +1,29 @@
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal at microchip.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#ifndef __CLK_MICROCHIP_PIC32
+#define __CLK_MICROCHIP_PIC32
+
+/* clock output indices */
+#define BASECLK 0
+#define PLLCLK 1
+#define MPLL 2
+#define SYSCLK 3
+#define PB1CLK 4
+#define PB2CLK 5
+#define PB3CLK 6
+#define PB4CLK 7
+#define PB5CLK 8
+#define PB6CLK 9
+#define PB7CLK 10
+#define REF1CLK 11
+#define REF2CLK 12
+#define REF3CLK 13
+#define REF4CLK 14
+#define REF5CLK 15
+
+#endif /* __CLK_MICROCHIP_PIC32 */
--
1.8.3.1
More information about the U-Boot
mailing list