[U-Boot] [PATCH] Use correct spelling of "U-Boot"
Marek Vasut
marex at denx.de
Wed Jan 27 14:01:13 CET 2016
On Wednesday, January 27, 2016 at 01:54:17 PM, Joe Hershberger wrote:
> Hi Bin,
>
> On Wed, Jan 27, 2016 at 1:28 AM, Bin Meng <bmeng.cn at gmail.com> wrote:
> > Correct spelling of "U-Boot" shall be used in all written text
> > (documentation, comments in source files etc.).
> >
> > Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
> >
> > ---
> > I cc'ed all maintainers, please help review in case I made any
> > mistakes. Also we should keep an eye on this when reviewing
> > patches in the future.
> >
> > README | 4 +--
> > arch/arm/cpu/arm926ejs/lpc32xx/cpu.c | 2 +-
> > arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S | 2 +-
> > arch/arm/cpu/armv7/nonsec_virt.S | 2 +-
> > arch/arm/cpu/armv8/Kconfig | 2 +-
> > arch/arm/dts/uniphier-ph1-ld4-ref.dts | 2 +-
> > arch/arm/dts/uniphier-ph1-ld6b-ref.dts | 2 +-
> > arch/arm/dts/uniphier-ph1-pro4-ref.dts | 2 +-
> > arch/arm/dts/uniphier-ph1-pro5-4kbox.dts | 2 +-
> > arch/arm/dts/uniphier-ph1-sld3-ref.dts | 2 +-
> > arch/arm/dts/uniphier-ph1-sld8-ref.dts | 2 +-
> > arch/arm/dts/uniphier-proxstream2-gentil.dts | 2 +-
> > arch/arm/dts/uniphier-proxstream2-vodka.dts | 2 +-
> > arch/arm/mach-exynos/include/mach/spl.h | 2 +-
> > arch/arm/mach-exynos/sec_boot.S | 4 +--
> > arch/arm/mach-exynos/spl_boot.c | 2 +-
> > arch/arm/mach-orion5x/lowlevel_init.S | 2 +-
> > arch/blackfin/cpu/Makefile | 2 +-
> > arch/blackfin/cpu/cpu.c | 2 +-
> > arch/blackfin/cpu/cpu.h | 2 +-
> > arch/blackfin/cpu/interrupts.c | 2 +-
> > arch/blackfin/cpu/start.S | 2 +-
> > arch/blackfin/cpu/traps.c | 2 +-
> > arch/blackfin/cpu/u-boot.lds | 2 +-
> > arch/blackfin/include/asm/bitops.h | 2 +-
> > arch/blackfin/include/asm/blackfin_local.h | 2 +-
> > arch/blackfin/include/asm/byteorder.h | 2 +-
> > arch/blackfin/include/asm/deferred.h | 2 +-
> > arch/blackfin/include/asm/delay.h | 2 +-
> > arch/blackfin/include/asm/global_data.h | 2 +-
> > arch/blackfin/include/asm/io.h | 2 +-
> > arch/blackfin/include/asm/linkage.h | 2 +-
> > arch/blackfin/include/asm/posix_types.h | 2 +-
> > arch/blackfin/include/asm/processor.h | 2 +-
> > arch/blackfin/include/asm/shared_resources.h | 2 +-
> > arch/blackfin/include/asm/soft_switch.h | 2 +-
> > arch/blackfin/include/asm/string.h | 2 +-
> > arch/blackfin/include/asm/system.h | 2 +-
> > arch/blackfin/include/asm/types.h | 2 +-
> > arch/blackfin/include/asm/u-boot.h | 2 +-
> > arch/blackfin/lib/Makefile | 2 +-
> > arch/blackfin/lib/boot.c | 2 +-
> > arch/blackfin/lib/cache.c | 2 +-
> > arch/blackfin/lib/cmd_cache_dump.c | 2 +-
> > arch/blackfin/lib/kgdb.c | 2 +-
> > arch/blackfin/lib/muldi3.c | 2 +-
> > arch/blackfin/lib/sections.c | 2 +-
> > arch/blackfin/lib/string.c | 2 +-
> > arch/microblaze/lib/muldi3.c | 2 +-
> > arch/mips/cpu/start.S | 2 +-
> > arch/nds32/include/asm/linkage.h | 2 +-
> > arch/powerpc/cpu/mpc85xx/p5040_serdes.c | 2 +-
> > arch/sparc/include/asm/u-boot.h | 2 +-
> > arch/sparc/include/asm/winmacro.h | 2 +-
> > arch/x86/cpu/resetvec.S | 2 +-
> > arch/x86/lib/bootm.c | 2 +-
> > board/bct-brettl2/Makefile | 2 +-
> > board/bct-brettl2/bct-brettl2.c | 2 +-
> > board/bf506f-ezkit/Makefile | 2 +-
> > board/bf506f-ezkit/bf506f-ezkit.c | 2 +-
> > board/bf518f-ezbrd/Makefile | 2 +-
> > board/bf518f-ezbrd/bf518f-ezbrd.c | 2 +-
> > board/bf525-ucr2/Makefile | 2 +-
> > board/bf525-ucr2/bf525-ucr2.c | 2 +-
> > board/bf526-ezbrd/Makefile | 2 +-
> > board/bf526-ezbrd/bf526-ezbrd.c | 2 +-
> > board/bf527-ad7160-eval/Makefile | 2 +-
> > board/bf527-ad7160-eval/bf527-ad7160-eval.c | 2 +-
> > board/bf527-ezkit/Makefile | 2 +-
> > board/bf527-ezkit/bf527-ezkit.c | 2 +-
> > board/bf527-sdp/Makefile | 2 +-
> > board/bf527-sdp/bf527-sdp.c | 2 +-
> > board/bf533-ezkit/Makefile | 2 +-
> > board/bf533-ezkit/bf533-ezkit.c | 2 +-
> > board/bf533-ezkit/flash-defines.h | 2 +-
> > board/bf533-ezkit/flash.c | 2 +-
> > board/bf533-ezkit/psd4256.h | 2 +-
> > board/bf533-stamp/Makefile | 2 +-
> > board/bf533-stamp/bf533-stamp.c | 2 +-
> > board/bf537-minotaur/Makefile | 2 +-
> > board/bf537-minotaur/bf537-minotaur.c | 2 +-
> > board/bf537-pnav/Makefile | 2 +-
> > board/bf537-pnav/bf537-pnav.c | 2 +-
> > board/bf537-srv1/Makefile | 2 +-
> > board/bf537-srv1/bf537-srv1.c | 2 +-
> > board/bf537-stamp/Makefile | 2 +-
> > board/bf537-stamp/bf537-stamp.c | 2 +-
> > board/bf538f-ezkit/Makefile | 2 +-
> > board/bf538f-ezkit/bf538f-ezkit.c | 2 +-
> > board/bf548-ezkit/Makefile | 2 +-
> > board/bf548-ezkit/bf548-ezkit.c | 2 +-
> > board/bf561-acvilon/Makefile | 2 +-
> > board/bf561-ezkit/Makefile | 2 +-
> > board/bf561-ezkit/bf561-ezkit.c | 2 +-
> > board/bf609-ezkit/Makefile | 2 +-
> > board/bf609-ezkit/bf609-ezkit.c | 2 +-
> > board/bf609-ezkit/soft_switch.c | 2 +-
> > board/bf609-ezkit/soft_switch.h | 2 +-
> > board/blackstamp/Makefile | 2 +-
> > board/blackstamp/blackstamp.c | 2 +-
> > board/blackvme/Makefile | 2 +-
> > board/blackvme/blackvme.c | 2 +-
> > board/br4/Makefile | 2 +-
> > board/br4/br4.c | 2 +-
> > board/cm-bf527/Makefile | 2 +-
> > board/cm-bf527/cm-bf527.c | 2 +-
> > board/cm-bf533/Makefile | 2 +-
> > board/cm-bf533/cm-bf533.c | 2 +-
> > board/cm-bf537e/Makefile | 2 +-
> > board/cm-bf537e/cm-bf537e.c | 2 +-
> > board/cm-bf537u/Makefile | 2 +-
> > board/cm-bf537u/cm-bf537u.c | 2 +-
> > board/cm-bf548/Makefile | 2 +-
> > board/cm-bf548/cm-bf548.c | 2 +-
> > board/cm-bf561/Makefile | 2 +-
> > board/cm-bf561/cm-bf561.c | 2 +-
> > board/congatec/cgtqmx6eval/README | 12 +++----
> > board/dnp5370/Makefile | 2 +-
> > board/dnp5370/dnp5370.c | 2 +-
> > board/embest/mx6boards/mx6boards.c | 2 +-
> > board/freescale/b4860qds/eth_b4860qds.c | 2 +-
> > board/freescale/bsc9131rdb/README | 2 +-
> > board/freescale/bsc9132qds/README | 2 +-
> > board/freescale/ls2080aqds/eth.c | 2 +-
> > board/freescale/mpc8313erdb/README | 2 +-
> > board/freescale/mpc8315erdb/README | 2 +-
> > board/freescale/mpc8323erdb/README | 2 +-
> > board/freescale/mpc832xemds/README | 2 +-
> > board/freescale/mpc837xemds/README | 2 +-
> > board/freescale/mpc837xerdb/README | 2 +-
> > board/freescale/mpc8569mds/README | 2 +-
> > board/freescale/mpc8572ds/README | 2 +-
> > board/freescale/mpc8610hpcd/README | 2 +-
> > board/freescale/mpc8641hpcn/README | 2 +-
> > board/freescale/mx28evk/README | 2 +-
> > board/freescale/mx35pdk/README | 2 +-
> > board/freescale/mx6sabresd/mx6sabresd.c | 2 +-
> > board/freescale/mx6slevk/mx6slevk.c | 2 +-
> > board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +-
> > board/freescale/mx6ul_14x14_evk/README | 6 ++--
> > board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 2 +-
> > board/freescale/mx7dsabresd/mx7dsabresd.c | 2 +-
> > board/freescale/t102xqds/README | 2 +-
> > board/freescale/t102xqds/eth_t102xqds.c | 2 +-
> > board/freescale/t102xrdb/README | 2 +-
> > board/freescale/t1040qds/README | 2 +-
> > board/freescale/t104xrdb/README | 4 +--
> > board/freescale/t208xqds/README | 6 ++--
> > board/freescale/t208xqds/eth_t208xqds.c | 2 +-
> > board/freescale/t208xrdb/README | 2 +-
> > board/freescale/t4qds/README | 6 ++--
> > board/freescale/t4qds/eth.c | 4 +--
> > board/gateworks/gw_ventana/README | 2 +-
> > board/ibf-dsp561/Makefile | 2 +-
> > board/ibf-dsp561/ibf-dsp561.c | 2 +-
> > board/imgtec/malta/malta.c | 2 +-
> > board/ip04/Makefile | 2 +-
> > board/ip04/ip04.c | 2 +-
> > board/keymile/km83xx/README.kmeter1 | 2 +-
> > board/pr1/Makefile | 2 +-
> > board/pr1/pr1.c | 2 +-
> > board/sbc8349/README | 4 +--
> > board/sbc8548/README | 4 +--
> > board/seco/mx6quq7/mx6quq7.c | 2 +-
> > board/solidrun/mx6cuboxi/README | 6 ++--
> > board/tbs/tbs2910/tbs2910.c | 2 +-
> > board/tcm-bf518/Makefile | 2 +-
> > board/tcm-bf518/tcm-bf518.c | 2 +-
> > board/tcm-bf537/Makefile | 2 +-
> > board/tcm-bf537/tcm-bf537.c | 2 +-
> > board/ti/ks2_evm/README | 4 +--
> > board/tqc/tqma6/tqma6.c | 2 +-
> > board/wandboard/README | 6 ++--
> > board/wandboard/wandboard.c | 2 +-
> > board/warp/README | 12 +++----
> > cmd/bootldr.c | 2 +-
> > cmd/cramfs.c | 2 +-
> > cmd/jffs2.c | 2 +-
> > cmd/ldrinfo.c | 2 +-
> > cmd/mtdparts.c | 2 +-
> > cmd/pxe.c | 4 +--
> > cmd/spibootldr.c | 2 +-
> > common/image-fdt.c | 2 +-
> > common/image.c | 2 +-
> > common/kgdb_stubs.c | 2 +-
> > doc/README.440-DDR-performance | 2 +-
> > doc/README.arm64 | 4 +--
> > doc/README.b4860qds | 8 ++---
> > doc/README.clang | 2 +-
> > doc/README.fec_mxc | 2 +-
> > doc/README.fsl-ddr | 6 ++--
> > doc/README.imx6 | 4 +--
> > doc/README.m68k | 2 +-
> > doc/README.malta | 2 +-
> > doc/README.menu | 2 +-
> > doc/README.mpc83xxads | 2 +-
> > doc/README.mpc85xx-spin-table | 2 +-
> > doc/README.mpc85xxads | 2 +-
> > doc/README.mpc85xxcds | 4 +--
> > doc/README.mxs | 18 +++++-----
> > doc/README.odroid | 20 ++++++------
> > doc/README.pxe | 40
> > +++++++++++------------ doc/README.qemu-mips
> > | 2 +-
> > doc/README.sata | 6 ++--
> > doc/README.video | 4 +--
> > doc/SPI/README.ti_qspi_flash | 2 +-
> > doc/uImage.FIT/kernel.its | 2 +-
> > doc/uImage.FIT/kernel_fdt.its | 2 +-
> > doc/uImage.FIT/multi.its | 2 +-
> > doc/uImage.FIT/source_file_format.txt | 14 ++++----
> > drivers/block/mvsata_ide.c | 2 +-
> > drivers/ddr/marvell/axp/ddr3_hw_training.c | 2 +-
> > drivers/gpio/db8500_gpio.c | 4 +--
> > drivers/mmc/sh_sdhi.c | 2 +-
> > drivers/mtd/nand/fsl_ifc_spl.c | 2 +-
> > drivers/mtd/nand/lpc32xx_nand_slc.c | 2 +-
> > drivers/mtd/nand/mxc_nand_spl.c | 2 +-
> > drivers/net/e1000.c | 2 +-
> > drivers/net/fsl-mc/mc.c | 2 +-
> > drivers/net/lan91c96.c | 2 +-
> > drivers/net/ne2000_base.c | 2 +-
> > drivers/serial/sandbox.c | 2 +-
> > drivers/serial/serial_bfin.c | 2 +-
> > drivers/soc/Makefile | 2 +-
> > drivers/usb/gadget/composite.c | 2 +-
> > drivers/usb/gadget/config.c | 2 +-
> > drivers/usb/gadget/epautoconf.c | 2 +-
> > drivers/usb/gadget/ether.c | 2 +-
> > drivers/usb/gadget/gadget_chips.h | 2 +-
> > drivers/usb/gadget/usbstring.c | 2 +-
> > examples/standalone/README.smc91111_eeprom | 8 ++---
> > examples/standalone/smc91111_eeprom.c | 2 +-
> > examples/standalone/smc911x_eeprom.c | 2 +-
> > include/asm-generic/errno.h | 2 +-
> > include/config_distro_defaults.h | 6 ++--
> > include/configs/TQM5200.h | 2 +-
> > include/configs/adp-ag101p.h | 2 +-
> > include/configs/bct-brettl2.h | 2 +-
> > include/configs/bf506f-ezkit.h | 2 +-
> > include/configs/bf518f-ezbrd.h | 2 +-
> > include/configs/bf525-ucr2.h | 2 +-
> > include/configs/bf526-ezbrd.h | 2 +-
> > include/configs/bf527-ad7160-eval.h | 2 +-
> > include/configs/bf527-ezkit.h | 2 +-
> > include/configs/bf527-sdp.h | 2 +-
> > include/configs/bf533-ezkit.h | 2 +-
> > include/configs/bf533-stamp.h | 2 +-
> > include/configs/bf537-minotaur.h | 2 +-
> > include/configs/bf537-pnav.h | 2 +-
> > include/configs/bf537-srv1.h | 2 +-
> > include/configs/bf537-stamp.h | 2 +-
> > include/configs/bf538f-ezkit.h | 2 +-
> > include/configs/bf548-ezkit.h | 2 +-
> > include/configs/bf561-acvilon.h | 2 +-
> > include/configs/bf561-ezkit.h | 2 +-
> > include/configs/bf609-ezkit.h | 2 +-
> > include/configs/blackstamp.h | 2 +-
> > include/configs/blackvme.h | 2 +-
> > include/configs/br4.h | 2 +-
> > include/configs/cm-bf527.h | 2 +-
> > include/configs/cm-bf533.h | 2 +-
> > include/configs/cm-bf537e.h | 2 +-
> > include/configs/cm-bf537u.h | 2 +-
> > include/configs/cm-bf548.h | 2 +-
> > include/configs/cm-bf561.h | 2 +-
> > include/configs/cobra5272.h | 2 +-
> > include/configs/dnp5370.h | 2 +-
> > include/configs/edb93xx.h | 2 +-
> > include/configs/espt.h | 2 +-
> > include/configs/exynos5-common.h | 2 +-
> > include/configs/ibf-dsp561.h | 2 +-
> > include/configs/ip04.h | 2 +-
> > include/configs/ls2080a_emu.h | 4 +--
> > include/configs/ls2080a_simu.h | 4 +--
> > include/configs/mx31pdk.h | 2 +-
> > include/configs/novena.h | 2 +-
> > include/configs/omap3_evm.h | 4 +--
> > include/configs/omap3_evm_common.h | 2 +-
> > include/configs/omap3_evm_quick_mmc.h | 4 +--
> > include/configs/omap3_evm_quick_nand.h | 4 +--
> > include/configs/origen.h | 2 +-
> > include/configs/pr1.h | 2 +-
> > include/configs/sh7763rdp.h | 2 +-
> > include/configs/smdkv310.h | 2 +-
> > include/configs/spear-common.h | 2 +-
> > include/configs/stv0991.h | 2 +-
> > include/configs/tcm-bf518.h | 2 +-
> > include/configs/tcm-bf537.h | 2 +-
> > include/configs/ts4800.h | 2 +-
> > include/configs/uniphier.h | 2 +-
> > include/configs/vexpress_aemv8a.h | 2 +-
> > include/configs/vexpress_ca15_tc2.h | 2 +-
> > include/configs/vexpress_ca5x2.h | 2 +-
> > include/configs/vexpress_ca9x4.h | 2 +-
> > include/linux/linkage.h | 2 +-
> > include/linux/usb/cdc.h | 2 +-
> > include/linux/usb/gadget.h | 2 +-
> > lib/Kconfig | 2 +-
> > lib/zlib/inffast.c | 2 +-
> > lib/zlib/inftrees.c | 2 +-
> > lib/zlib/zutil.h | 2 +-
> > scripts/basic/fixdep.c | 4 +--
> > test/ums/ums_gadget_test.sh | 2 +-
> > tools/palmtreo680/flash_u-boot.c | 2 +-
> > tools/patman/README | 2 +-
> > 305 files changed, 398 insertions(+), 398 deletions(-)
> >
> > diff --git a/README b/README
> > index 864c7cc..6cd5184 100644
> > --- a/README
> > +++ b/README
> >
> > @@ -460,7 +460,7 @@ The following options need to be configured:
> > CONFIG_SYS_CPC_REINIT_F
> > This CONFIG is defined when the CPC is configured as SRAM
> > at the
> >
> > - time of U-boot entry and is required to be
> > re-initialized. + time of U-Boot entry and is required to
> > be re-initialized.
> >
> > CONFIG_DEEP_SLEEP
> > Indicates this SoC supports deep sleep feature. If deep
> > sleep is
> >
> > @@ -2952,7 +2952,7 @@ CBFS (Coreboot Filesystem) support
> >
> > - Parallel Flash support:
> > CONFIG_SYS_NO_FLASH
> >
> > - Traditionally U-boot was run on systems with parallel NOR
> > + Traditionally U-Boot was run on systems with parallel NOR
> >
> > flash. This option is used to disable support for
> > parallel NOR flash. This option should be defined if the
> > board does not have parallel flash.
> >
> > diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
> > b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c index bee9318..085649e 100644
> > --- a/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
> > +++ b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
> > @@ -46,7 +46,7 @@ void reset_cpu(ulong addr)
> >
> > int arch_cpu_init(void)
> > {
> >
> > /*
> >
> > - * It might be necessary to flush data cache, if U-boot is loaded
> > + * It might be necessary to flush data cache, if U-Boot is loaded
> >
> > * from kickstart bootloader, e.g. from S1L loader
> > */
> >
> > flush_dcache_all();
> >
> > diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S
> > b/arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S index 4b8053e..b21abc3
> > 100644
> > --- a/arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S
> > +++ b/arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S
> >
> > @@ -41,5 +41,5 @@ lowlevel_init:
> > orr r0, #0x00000004
> > str r0, [r1]
> >
> > - /* Return to U-boot via saved link register */
> > + /* Return to U-Boot via saved link register */
> >
> > mov pc, lr
> >
> > diff --git a/arch/arm/cpu/armv7/nonsec_virt.S
> > b/arch/arm/cpu/armv7/nonsec_virt.S index 31d1c9e..b7563ed 100644
> > --- a/arch/arm/cpu/armv7/nonsec_virt.S
> > +++ b/arch/arm/cpu/armv7/nonsec_virt.S
> >
> > @@ -37,7 +37,7 @@ _monitor_vectors:
> > /*
> >
> > * secure monitor handler
> >
> > - * U-boot calls this "software interrupt" in start.S
> > + * U-Boot calls this "software interrupt" in start.S
> >
> > * This is executed on a "smc" instruction, we use a "smc #0" to switch
> > * to non-secure state.
> > * r0, r1, r2: passed to the callee
> >
> > diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
> > index 4cd84b0..3d19bbf 100644
> > --- a/arch/arm/cpu/armv8/Kconfig
> > +++ b/arch/arm/cpu/armv8/Kconfig
> > @@ -1,6 +1,6 @@
> >
> > if ARM64
> >
> > config ARMV8_MULTIENTRY
> >
> > - boolean "Enable multiple CPUs to enter into U-boot"
> > + boolean "Enable multiple CPUs to enter into U-Boot"
> >
> > endif
> >
> > diff --git a/arch/arm/dts/uniphier-ph1-ld4-ref.dts
> > b/arch/arm/dts/uniphier-ph1-ld4-ref.dts index 469bd05..f62916d 100644
> > --- a/arch/arm/dts/uniphier-ph1-ld4-ref.dts
> > +++ b/arch/arm/dts/uniphier-ph1-ld4-ref.dts
> > @@ -59,7 +59,7 @@
> >
> > status = "okay";
> >
> > };
> >
> > -/* for U-boot only */
> > +/* for U-Boot only */
> >
> > / {
> >
> > soc {
> >
> > u-boot,dm-pre-reloc;
> >
> > diff --git a/arch/arm/dts/uniphier-ph1-ld6b-ref.dts
> > b/arch/arm/dts/uniphier-ph1-ld6b-ref.dts index e0a972f..dca408b 100644
> > --- a/arch/arm/dts/uniphier-ph1-ld6b-ref.dts
> > +++ b/arch/arm/dts/uniphier-ph1-ld6b-ref.dts
> > @@ -61,7 +61,7 @@
> >
> > status = "okay";
> >
> > };
> >
> > -/* for U-boot only */
> > +/* for U-Boot only */
> >
> > / {
> >
> > soc {
> >
> > u-boot,dm-pre-reloc;
> >
> > diff --git a/arch/arm/dts/uniphier-ph1-pro4-ref.dts
> > b/arch/arm/dts/uniphier-ph1-pro4-ref.dts index 02e74a7..202a642 100644
> > --- a/arch/arm/dts/uniphier-ph1-pro4-ref.dts
> > +++ b/arch/arm/dts/uniphier-ph1-pro4-ref.dts
> > @@ -66,7 +66,7 @@
> >
> > status = "okay";
> >
> > };
> >
> > -/* for U-boot only */
> > +/* for U-Boot only */
> >
> > / {
> >
> > soc {
> >
> > u-boot,dm-pre-reloc;
> >
> > diff --git a/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts
> > b/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts index d46e827..02a3362 100644
> > --- a/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts
> > +++ b/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts
> > @@ -47,7 +47,7 @@
> >
> > status = "okay";
> >
> > };
> >
> > -/* for U-boot only */
> > +/* for U-Boot only */
> >
> > / {
> >
> > soc {
> >
> > u-boot,dm-pre-reloc;
> >
> > diff --git a/arch/arm/dts/uniphier-ph1-sld3-ref.dts
> > b/arch/arm/dts/uniphier-ph1-sld3-ref.dts index 1f3aee9..ff17945 100644
> > --- a/arch/arm/dts/uniphier-ph1-sld3-ref.dts
> > +++ b/arch/arm/dts/uniphier-ph1-sld3-ref.dts
> > @@ -68,7 +68,7 @@
> >
> > status = "okay";
> >
> > };
> >
> > -/* for U-boot only */
> > +/* for U-Boot only */
> >
> > &serial0 {
> >
> > u-boot,dm-pre-reloc;
> >
> > };
> >
> > diff --git a/arch/arm/dts/uniphier-ph1-sld8-ref.dts
> > b/arch/arm/dts/uniphier-ph1-sld8-ref.dts index b58bf07..b5b6f65 100644
> > --- a/arch/arm/dts/uniphier-ph1-sld8-ref.dts
> > +++ b/arch/arm/dts/uniphier-ph1-sld8-ref.dts
> > @@ -63,7 +63,7 @@
> >
> > status = "okay";
> >
> > };
> >
> > -/* for U-boot only */
> > +/* for U-Boot only */
> >
> > / {
> >
> > soc {
> >
> > u-boot,dm-pre-reloc;
> >
> > diff --git a/arch/arm/dts/uniphier-proxstream2-gentil.dts
> > b/arch/arm/dts/uniphier-proxstream2-gentil.dts index a49215e..c6c133a
> > 100644
> > --- a/arch/arm/dts/uniphier-proxstream2-gentil.dts
> > +++ b/arch/arm/dts/uniphier-proxstream2-gentil.dts
> > @@ -49,7 +49,7 @@
> >
> > status = "okay";
> >
> > };
> >
> > -/* for U-boot only */
> > +/* for U-Boot only */
> >
> > / {
> >
> > soc {
> >
> > u-boot,dm-pre-reloc;
> >
> > diff --git a/arch/arm/dts/uniphier-proxstream2-vodka.dts
> > b/arch/arm/dts/uniphier-proxstream2-vodka.dts index 63bd363..3703ad3
> > 100644
> > --- a/arch/arm/dts/uniphier-proxstream2-vodka.dts
> > +++ b/arch/arm/dts/uniphier-proxstream2-vodka.dts
> > @@ -45,7 +45,7 @@
> >
> > status = "okay";
> >
> > };
> >
> > -/* for U-boot only */
> > +/* for U-Boot only */
> >
> > / {
> >
> > soc {
> >
> > u-boot,dm-pre-reloc;
> >
> > diff --git a/arch/arm/mach-exynos/include/mach/spl.h
> > b/arch/arm/mach-exynos/include/mach/spl.h index 0c480ac..42c0eb1 100644
> > --- a/arch/arm/mach-exynos/include/mach/spl.h
> > +++ b/arch/arm/mach-exynos/include/mach/spl.h
> > @@ -42,7 +42,7 @@ struct spl_machine_param {
> >
> > u32 mem_iv_size; /* Memory channel interleaving
> > size */ enum ddr_mode mem_type; /* Type of on-board
> > memory */ /*
> >
> > - * U-boot size - The iROM mmc copy function used by the SPL takes
> > a + * U-Boot size - The iROM mmc copy function used by the SPL
> > takes a
> >
> > * block count paramter to describe the u-boot size unlike the
> > spi
>
> How about here?
>
> > * boot copy function which just uses the u-boot size directly.
> > Align
>
> and here?
>
> > * the u-boot size to block size (512 bytes) when populating the
> > SPL
>
> and here?
>
> > diff --git a/arch/arm/mach-exynos/sec_boot.S
> > b/arch/arm/mach-exynos/sec_boot.S index dfc3455..5dc216d 100644
> > --- a/arch/arm/mach-exynos/sec_boot.S
> > +++ b/arch/arm/mach-exynos/sec_boot.S
> >
> > @@ -30,10 +30,10 @@ relocate_wait_code:
> > * because that comes out to be the last 4KB of the iRAM
> > * (Base Address - 0x02020000, Limit Address - 0x020740000).
> > *
> >
> > - * U-boot and kernel are aware of this code and flags by the simple
> > + * U-Boot and kernel are aware of this code and flags by the simple
> >
> > * fact that we are implementing a workaround in the last 4KB
> > * of the iRAM and we have already defined these flag and address
> >
> > - * values in both kernel and U-boot for our use.
> > + * values in both kernel and U-Boot for our use.
> >
> > */
> >
> > code_base:
> > b 1f
> >
> > diff --git a/arch/arm/mach-exynos/spl_boot.c
> > b/arch/arm/mach-exynos/spl_boot.c index c7f943e..7df0102 100644
> > --- a/arch/arm/mach-exynos/spl_boot.c
> > +++ b/arch/arm/mach-exynos/spl_boot.c
> > @@ -177,7 +177,7 @@ static void exynos_spi_copy(unsigned int uboot_size,
> > unsigned int uboot_addr)
> >
> > #endif
> >
> > /*
> >
> > -* Copy U-boot from mmc to RAM:
> >
> > +* Copy U-Boot from mmc to RAM:
> > * COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
> > * Pointer to API (Data transfer from mmc to ram)
> > */
> >
> > diff --git a/arch/arm/mach-orion5x/lowlevel_init.S
> > b/arch/arm/mach-orion5x/lowlevel_init.S index 51a8b3c..3f38f36 100644
> > --- a/arch/arm/mach-orion5x/lowlevel_init.S
> > +++ b/arch/arm/mach-orion5x/lowlevel_init.S
> >
> > @@ -283,5 +283,5 @@ lowlevel_init:
> > #endif /* CONFIG_SPL_BUILD */
> >
> > - /* Return to U-boot via saved link register */
> > + /* Return to U-Boot via saved link register */
> >
> > mov pc, lr
> >
> > diff --git a/arch/blackfin/cpu/Makefile b/arch/blackfin/cpu/Makefile
> > index 7cd0bbf..7ba5f1b 100644
> > --- a/arch/blackfin/cpu/Makefile
> > +++ b/arch/blackfin/cpu/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/arch/blackfin/cpu/cpu.c b/arch/blackfin/cpu/cpu.c
> > index 91aa5cc..529322a 100644
> > --- a/arch/blackfin/cpu/cpu.c
> > +++ b/arch/blackfin/cpu/cpu.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - cpu.c CPU specific functions
> > + * U-Boot - cpu.c CPU specific functions
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/cpu/cpu.h b/arch/blackfin/cpu/cpu.h
> > index f6aa1b6..a5fe02e 100644
> > --- a/arch/blackfin/cpu/cpu.h
> > +++ b/arch/blackfin/cpu/cpu.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - cpu.h
> > + * U-Boot - cpu.h
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/cpu/interrupts.c
> > b/arch/blackfin/cpu/interrupts.c index 9189816..45c92c3 100644
> > --- a/arch/blackfin/cpu/interrupts.c
> > +++ b/arch/blackfin/cpu/interrupts.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - interrupts.c Interrupt related routines
> > + * U-Boot - interrupts.c Interrupt related routines
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S
> > index f31abfa..482cc25 100644
> > --- a/arch/blackfin/cpu/start.S
> > +++ b/arch/blackfin/cpu/start.S
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - start.S Startup file for Blackfin u-boot
> > + * U-Boot - start.S Startup file for Blackfin u-boot
>
> and here?
>
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/cpu/traps.c b/arch/blackfin/cpu/traps.c
> > index 10f72f8..21760d0 100644
> > --- a/arch/blackfin/cpu/traps.c
> > +++ b/arch/blackfin/cpu/traps.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - traps.c Routines related to interrupts and exceptions
> > + * U-Boot - traps.c Routines related to interrupts and exceptions
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/cpu/u-boot.lds b/arch/blackfin/cpu/u-boot.lds
> > index ae1b813..f407fb2 100644
> > --- a/arch/blackfin/cpu/u-boot.lds
> > +++ b/arch/blackfin/cpu/u-boot.lds
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - u-boot.lds.S
> > + * U-Boot - u-boot.lds.S
> >
> > *
> > * Copyright (c) 2005-2010 Analog Device Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/bitops.h
> > b/arch/blackfin/include/asm/bitops.h index 6cde6db..a1462bd 100644
> > --- a/arch/blackfin/include/asm/bitops.h
> > +++ b/arch/blackfin/include/asm/bitops.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - bitops.h Routines for bit operations
> > + * U-Boot - bitops.h Routines for bit operations
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/blackfin_local.h
> > b/arch/blackfin/include/asm/blackfin_local.h index 868c82e..00556de
> > 100644
> > --- a/arch/blackfin/include/asm/blackfin_local.h
> > +++ b/arch/blackfin/include/asm/blackfin_local.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - blackfin_local.h
> > + * U-Boot - blackfin_local.h
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/byteorder.h
> > b/arch/blackfin/include/asm/byteorder.h index 98fb7bf..593ba5a 100644
> > --- a/arch/blackfin/include/asm/byteorder.h
> > +++ b/arch/blackfin/include/asm/byteorder.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - byteorder.h
> > + * U-Boot - byteorder.h
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/deferred.h
> > b/arch/blackfin/include/asm/deferred.h index 82ceda3..e75d7e8 100644
> > --- a/arch/blackfin/include/asm/deferred.h
> > +++ b/arch/blackfin/include/asm/deferred.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - deferred register layout
> > + * U-Boot - deferred register layout
> >
> > *
> > * Copyright 2004-2009 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/delay.h
> > b/arch/blackfin/include/asm/delay.h index f146efd..06c3edd 100644
> > --- a/arch/blackfin/include/asm/delay.h
> > +++ b/arch/blackfin/include/asm/delay.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - delay.h Routines for introducing delays
> > + * U-Boot - delay.h Routines for introducing delays
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/global_data.h
> > b/arch/blackfin/include/asm/global_data.h index 7aefead..89fd21f 100644
> > --- a/arch/blackfin/include/asm/global_data.h
> > +++ b/arch/blackfin/include/asm/global_data.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - global_data.h Declarations for global data of u-boot
> > + * U-Boot - global_data.h Declarations for global data of u-boot
>
> and here?
>
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/io.h
> > b/arch/blackfin/include/asm/io.h index aadb0d2..d3337e4 100644
> > --- a/arch/blackfin/include/asm/io.h
> > +++ b/arch/blackfin/include/asm/io.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - io.h IO routines
> > + * U-Boot - io.h IO routines
> >
> > *
> > * Copyright 2004-2009 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/linkage.h
> > b/arch/blackfin/include/asm/linkage.h index 7e06bc7..60d5317 100644
> > --- a/arch/blackfin/include/asm/linkage.h
> > +++ b/arch/blackfin/include/asm/linkage.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - linkage.h
> > + * U-Boot - linkage.h
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/posix_types.h
> > b/arch/blackfin/include/asm/posix_types.h index 18be579..8535235 100644
> > --- a/arch/blackfin/include/asm/posix_types.h
> > +++ b/arch/blackfin/include/asm/posix_types.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - posix_types.h
> > + * U-Boot - posix_types.h
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/processor.h
> > b/arch/blackfin/include/asm/processor.h index b798006..1daf59b 100644
> > --- a/arch/blackfin/include/asm/processor.h
> > +++ b/arch/blackfin/include/asm/processor.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - processor.h
> > + * U-Boot - processor.h
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/shared_resources.h
> > b/arch/blackfin/include/asm/shared_resources.h index 1a03392..42dab9f
> > 100644
> > --- a/arch/blackfin/include/asm/shared_resources.h
> > +++ b/arch/blackfin/include/asm/shared_resources.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - setup.h
> > + * U-Boot - setup.h
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/soft_switch.h
> > b/arch/blackfin/include/asm/soft_switch.h index ff8e44d..321b070 100644
> > --- a/arch/blackfin/include/asm/soft_switch.h
> > +++ b/arch/blackfin/include/asm/soft_switch.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2008-2012 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/string.h
> > b/arch/blackfin/include/asm/string.h index aea4e29..15f50f2 100644
> > --- a/arch/blackfin/include/asm/string.h
> > +++ b/arch/blackfin/include/asm/string.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - string.h String functions
> > + * U-Boot - string.h String functions
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/system.h
> > b/arch/blackfin/include/asm/system.h index 5a7e8ed..f0c4ae2 100644
> > --- a/arch/blackfin/include/asm/system.h
> > +++ b/arch/blackfin/include/asm/system.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - system.h
> > + * U-Boot - system.h
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/types.h
> > b/arch/blackfin/include/asm/types.h index 92124f1..4da64c4 100644
> > --- a/arch/blackfin/include/asm/types.h
> > +++ b/arch/blackfin/include/asm/types.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - types.h
> > + * U-Boot - types.h
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/include/asm/u-boot.h
> > b/arch/blackfin/include/asm/u-boot.h index 7b5cf6a..1ada44e 100644
> > --- a/arch/blackfin/include/asm/u-boot.h
> > +++ b/arch/blackfin/include/asm/u-boot.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - u-boot.h Structure declarations for board specific data
> > + * U-Boot - u-boot.h Structure declarations for board specific data
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile
> > index b534a98..de02c69 100644
> > --- a/arch/blackfin/lib/Makefile
> > +++ b/arch/blackfin/lib/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot Makefile
> > +# U-Boot Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Devices Inc.
> > #
> >
> > diff --git a/arch/blackfin/lib/boot.c b/arch/blackfin/lib/boot.c
> > index 5644d58..fd4c82e 100644
> > --- a/arch/blackfin/lib/boot.c
> > +++ b/arch/blackfin/lib/boot.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - boot.c - misc boot helper functions
> > + * U-Boot - boot.c - misc boot helper functions
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/lib/cache.c b/arch/blackfin/lib/cache.c
> > index e8a0cb5..8d93339 100644
> > --- a/arch/blackfin/lib/cache.c
> > +++ b/arch/blackfin/lib/cache.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - cache.c
> > + * U-Boot - cache.c
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/lib/cmd_cache_dump.c
> > b/arch/blackfin/lib/cmd_cache_dump.c index f9f9097..a4c799a 100644
> > --- a/arch/blackfin/lib/cmd_cache_dump.c
> > +++ b/arch/blackfin/lib/cmd_cache_dump.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - cmd_cache_dump.c
> > + * U-Boot - cmd_cache_dump.c
> >
> > *
> > * Copyright (c) 2007-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/lib/kgdb.c b/arch/blackfin/lib/kgdb.c
> > index 4ca3fc7..2a7c072 100644
> > --- a/arch/blackfin/lib/kgdb.c
> > +++ b/arch/blackfin/lib/kgdb.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - architecture specific kgdb code
> > + * U-Boot - architecture specific kgdb code
> >
> > *
> > * Copyright 2009 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/lib/muldi3.c b/arch/blackfin/lib/muldi3.c
> > index 65f5523..9f6f60d 100644
> > --- a/arch/blackfin/lib/muldi3.c
> > +++ b/arch/blackfin/lib/muldi3.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - muldi3.c contains routines for mult and div
> > + * U-Boot - muldi3.c contains routines for mult and div
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/lib/sections.c b/arch/blackfin/lib/sections.c
> > index b50f30a..86fc4df 100644
> > --- a/arch/blackfin/lib/sections.c
> > +++ b/arch/blackfin/lib/sections.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - section.c
> > + * U-Boot - section.c
> >
> > *
> > * Copyright (c) 2014 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/blackfin/lib/string.c b/arch/blackfin/lib/string.c
> > index 211df7b..c904a88 100644
> > --- a/arch/blackfin/lib/string.c
> > +++ b/arch/blackfin/lib/string.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - string.c Contains library routines.
> > + * U-Boot - string.c Contains library routines.
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/microblaze/lib/muldi3.c b/arch/microblaze/lib/muldi3.c
> > index 5c1a154..95b6b32 100644
> > --- a/arch/microblaze/lib/muldi3.c
> > +++ b/arch/microblaze/lib/muldi3.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - muldi3.c contains routines for mult and div
> > + * U-Boot - muldi3.c contains routines for mult and div
> >
> > *
> > *
> > * SPDX-License-Identifier: GPL-2.0+
> >
> > diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S
> > index e95cdca..3c42ca5 100644
> > --- a/arch/mips/cpu/start.S
> > +++ b/arch/mips/cpu/start.S
> > @@ -57,7 +57,7 @@
> >
> > .set noreorder
> >
> > ENTRY(_start)
> >
> > - /* U-boot entry point */
> > + /* U-Boot entry point */
> >
> > b reset
> >
> > nop
> >
> > diff --git a/arch/nds32/include/asm/linkage.h
> > b/arch/nds32/include/asm/linkage.h index 7e06bc7..60d5317 100644
> > --- a/arch/nds32/include/asm/linkage.h
> > +++ b/arch/nds32/include/asm/linkage.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - linkage.h
> > + * U-Boot - linkage.h
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/arch/powerpc/cpu/mpc85xx/p5040_serdes.c
> > b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c index 2655974..577b6d9 100644
> > --- a/arch/powerpc/cpu/mpc85xx/p5040_serdes.c
> > +++ b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c
> > @@ -12,7 +12,7 @@
> >
> > /*
> >
> > * Note: For P5040, the fourth SerDes bank (with two lanes) is on
> > SerDes2, but
> >
> > - * U-boot only supports one SerDes controller. Therefore, we ignore
> > bank 4 in + * U-Boot only supports one SerDes controller. Therefore, we
> > ignore bank 4 in
> >
> > * this table. This works because most of the SerDes code is for errata
> > * work-arounds, and there are no P5040 errata that effect bank 4.
> > */
> >
> > diff --git a/arch/sparc/include/asm/u-boot.h
> > b/arch/sparc/include/asm/u-boot.h index 9b9a71d..75ac7dc 100644
> > --- a/arch/sparc/include/asm/u-boot.h
> > +++ b/arch/sparc/include/asm/u-boot.h
> > @@ -13,7 +13,7 @@
> >
> > /* Currently, this board information is not passed to
> >
> > * Linux kernel from U-Boot, but may be passed to other
> >
> > - * Operating systems. This is because U-boot emulates
> > + * Operating systems. This is because U-Boot emulates
> >
> > * a SUN PROM loader (from Linux point of view).
> > */
> >
> > #include <asm-generic/u-boot.h>
> >
> > diff --git a/arch/sparc/include/asm/winmacro.h
> > b/arch/sparc/include/asm/winmacro.h index 4f68fbd..916ee9c 100644
> > --- a/arch/sparc/include/asm/winmacro.h
> > +++ b/arch/sparc/include/asm/winmacro.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * Added to U-boot,
> > + * Added to U-Boot,
> >
> > * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com
> > * Copyright (C) 2007
> > *
> >
> > diff --git a/arch/x86/cpu/resetvec.S b/arch/x86/cpu/resetvec.S
> > index 68a5b94..183275b 100644
> > --- a/arch/x86/cpu/resetvec.S
> > +++ b/arch/x86/cpu/resetvec.S
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - x86 Startup Code
> > + * U-Boot - x86 Startup Code
> >
> > *
> > * (C) Copyright 2002
> > * Daniel Engström, Omicron Ceti AB, <daniel at omicron.se>
> >
> > diff --git a/arch/x86/lib/bootm.c b/arch/x86/lib/bootm.c
> > index f441c84..783be69 100644
> > --- a/arch/x86/lib/bootm.c
> > +++ b/arch/x86/lib/bootm.c
> > @@ -162,7 +162,7 @@ int boot_linux_kernel(ulong setup_base, ulong
> > load_address, bool image_64bit)
> >
> > * boot_params structure, and then jump to the kernel. We
> > * assume that %cs is 0x10, 4GB flat, and read/execute,
> > and * the data segments are 0x18, 4GB flat, and
> > read/write.
> >
> > - * U-boot is setting them up that way for itself in
> > + * U-Boot is setting them up that way for itself in
> >
> > * arch/i386/cpu/cpu.c.
> > *
> > * Note that we cannot currently boot a kernel while
> > running as
> >
> > diff --git a/board/bct-brettl2/Makefile b/board/bct-brettl2/Makefile
> > index 12154b6..28fccc0 100644
> > --- a/board/bct-brettl2/Makefile
> > +++ b/board/bct-brettl2/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/bct-brettl2/bct-brettl2.c
> > b/board/bct-brettl2/bct-brettl2.c index bf7cd62..adb8605 100644
> > --- a/board/bct-brettl2/bct-brettl2.c
> > +++ b/board/bct-brettl2/bct-brettl2.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file for BCT brettl2
> > + * U-Boot - main board file for BCT brettl2
> >
> > *
> > * Copyright (c) 2010 BCT Electronic GmbH
> > *
> >
> > diff --git a/board/bf506f-ezkit/Makefile b/board/bf506f-ezkit/Makefile
> > index 0f134f9..7efe1bc 100644
> > --- a/board/bf506f-ezkit/Makefile
> > +++ b/board/bf506f-ezkit/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf506f-ezkit/bf506f-ezkit.c
> > b/board/bf506f-ezkit/bf506f-ezkit.c index 638500d..77e40ae 100644
> > --- a/board/bf506f-ezkit/bf506f-ezkit.c
> > +++ b/board/bf506f-ezkit/bf506f-ezkit.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2008-2010 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf518f-ezbrd/Makefile b/board/bf518f-ezbrd/Makefile
> > index 3a6abaa..e9e23ed 100644
> > --- a/board/bf518f-ezbrd/Makefile
> > +++ b/board/bf518f-ezbrd/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf518f-ezbrd/bf518f-ezbrd.c
> > b/board/bf518f-ezbrd/bf518f-ezbrd.c index bf4a7db..a14e509 100644
> > --- a/board/bf518f-ezbrd/bf518f-ezbrd.c
> > +++ b/board/bf518f-ezbrd/bf518f-ezbrd.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2008-2009 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf525-ucr2/Makefile b/board/bf525-ucr2/Makefile
> > index 8de71a1..1be1d31 100644
> > --- a/board/bf525-ucr2/Makefile
> > +++ b/board/bf525-ucr2/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf525-ucr2/bf525-ucr2.c
> > b/board/bf525-ucr2/bf525-ucr2.c index 3e6df1f..36a725c 100644
> > --- a/board/bf525-ucr2/bf525-ucr2.c
> > +++ b/board/bf525-ucr2/bf525-ucr2.c
> > @@ -1,4 +1,4 @@
> > -/* U-boot - bf525-ucr2.c board specific routines
> > +/* U-Boot - bf525-ucr2.c board specific routines
> >
> > *
> > * (C) Copyright 2000-2004
> > * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> >
> > diff --git a/board/bf526-ezbrd/Makefile b/board/bf526-ezbrd/Makefile
> > index 34ac563..c4882c9 100644
> > --- a/board/bf526-ezbrd/Makefile
> > +++ b/board/bf526-ezbrd/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf526-ezbrd/bf526-ezbrd.c
> > b/board/bf526-ezbrd/bf526-ezbrd.c index db1ee28..a506d1b 100644
> > --- a/board/bf526-ezbrd/bf526-ezbrd.c
> > +++ b/board/bf526-ezbrd/bf526-ezbrd.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2009 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf527-ad7160-eval/Makefile
> > b/board/bf527-ad7160-eval/Makefile index 9d8ecf1..c225f72 100644
> > --- a/board/bf527-ad7160-eval/Makefile
> > +++ b/board/bf527-ad7160-eval/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf527-ad7160-eval/bf527-ad7160-eval.c
> > b/board/bf527-ad7160-eval/bf527-ad7160-eval.c index ea405b6..9180630
> > 100644
> > --- a/board/bf527-ad7160-eval/bf527-ad7160-eval.c
> > +++ b/board/bf527-ad7160-eval/bf527-ad7160-eval.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2010 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf527-ezkit/Makefile b/board/bf527-ezkit/Makefile
> > index cedd821..53ec9e7 100644
> > --- a/board/bf527-ezkit/Makefile
> > +++ b/board/bf527-ezkit/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf527-ezkit/bf527-ezkit.c
> > b/board/bf527-ezkit/bf527-ezkit.c index b551d4e..c4f58fa 100644
> > --- a/board/bf527-ezkit/bf527-ezkit.c
> > +++ b/board/bf527-ezkit/bf527-ezkit.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2009 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf527-sdp/Makefile b/board/bf527-sdp/Makefile
> > index 1ddb026..77acb42 100644
> > --- a/board/bf527-sdp/Makefile
> > +++ b/board/bf527-sdp/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf527-sdp/bf527-sdp.c b/board/bf527-sdp/bf527-sdp.c
> > index 504869d..0c6094b 100644
> > --- a/board/bf527-sdp/bf527-sdp.c
> > +++ b/board/bf527-sdp/bf527-sdp.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2010 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf533-ezkit/Makefile b/board/bf533-ezkit/Makefile
> > index 6838cf0..bf7a2c4 100644
> > --- a/board/bf533-ezkit/Makefile
> > +++ b/board/bf533-ezkit/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2007 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf533-ezkit/bf533-ezkit.c
> > b/board/bf533-ezkit/bf533-ezkit.c index 81e390c..6879319 100644
> > --- a/board/bf533-ezkit/bf533-ezkit.c
> > +++ b/board/bf533-ezkit/bf533-ezkit.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf533-ezkit/flash-defines.h
> > b/board/bf533-ezkit/flash-defines.h index fa32203..7822a9d 100644
> > --- a/board/bf533-ezkit/flash-defines.h
> > +++ b/board/bf533-ezkit/flash-defines.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - flash-defines.h
> > + * U-Boot - flash-defines.h
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf533-ezkit/flash.c b/board/bf533-ezkit/flash.c
> > index fd06b31..3180a76 100644
> > --- a/board/bf533-ezkit/flash.c
> > +++ b/board/bf533-ezkit/flash.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - flash.c Flash driver for PSD4256GV
> > + * U-Boot - flash.c Flash driver for PSD4256GV
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > * This file is based on BF533EzFlash.c originally written by Analog
> > Devices, Inc.
> >
> > diff --git a/board/bf533-ezkit/psd4256.h b/board/bf533-ezkit/psd4256.h
> > index 56c6442..9256696 100644
> > --- a/board/bf533-ezkit/psd4256.h
> > +++ b/board/bf533-ezkit/psd4256.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - psd4256.h
> > + * U-Boot - psd4256.h
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf533-stamp/Makefile b/board/bf533-stamp/Makefile
> > index 244f9e0..041c98e 100644
> > --- a/board/bf533-stamp/Makefile
> > +++ b/board/bf533-stamp/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf533-stamp/bf533-stamp.c
> > b/board/bf533-stamp/bf533-stamp.c index 585f5f1..eb000a6 100644
> > --- a/board/bf533-stamp/bf533-stamp.c
> > +++ b/board/bf533-stamp/bf533-stamp.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf537-minotaur/Makefile
> > b/board/bf537-minotaur/Makefile index 66d2f05..13ed8bf 100644
> > --- a/board/bf537-minotaur/Makefile
> > +++ b/board/bf537-minotaur/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf537-minotaur/bf537-minotaur.c
> > b/board/bf537-minotaur/bf537-minotaur.c index 9312216..34750ec 100644
> > --- a/board/bf537-minotaur/bf537-minotaur.c
> > +++ b/board/bf537-minotaur/bf537-minotaur.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2009 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf537-pnav/Makefile b/board/bf537-pnav/Makefile
> > index ffcdf1f..f7af8cd 100644
> > --- a/board/bf537-pnav/Makefile
> > +++ b/board/bf537-pnav/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf537-pnav/bf537-pnav.c
> > b/board/bf537-pnav/bf537-pnav.c index 6739fe1..c3b06f0 100644
> > --- a/board/bf537-pnav/bf537-pnav.c
> > +++ b/board/bf537-pnav/bf537-pnav.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2009 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf537-srv1/Makefile b/board/bf537-srv1/Makefile
> > index cd0da27..1815fc5 100644
> > --- a/board/bf537-srv1/Makefile
> > +++ b/board/bf537-srv1/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf537-srv1/bf537-srv1.c
> > b/board/bf537-srv1/bf537-srv1.c index b0ffe1a..fc22c07 100644
> > --- a/board/bf537-srv1/bf537-srv1.c
> > +++ b/board/bf537-srv1/bf537-srv1.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2009 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile
> > index 234119a..4008e3a 100644
> > --- a/board/bf537-stamp/Makefile
> > +++ b/board/bf537-stamp/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2007 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf537-stamp/bf537-stamp.c
> > b/board/bf537-stamp/bf537-stamp.c index 85d41d0..9b9daf4 100644
> > --- a/board/bf537-stamp/bf537-stamp.c
> > +++ b/board/bf537-stamp/bf537-stamp.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf538f-ezkit/Makefile b/board/bf538f-ezkit/Makefile
> > index 7c8cda0..eb1703e 100644
> > --- a/board/bf538f-ezkit/Makefile
> > +++ b/board/bf538f-ezkit/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf538f-ezkit/bf538f-ezkit.c
> > b/board/bf538f-ezkit/bf538f-ezkit.c index 49d30e7..2dd4c0c 100644
> > --- a/board/bf538f-ezkit/bf538f-ezkit.c
> > +++ b/board/bf538f-ezkit/bf538f-ezkit.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2008 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf548-ezkit/Makefile b/board/bf548-ezkit/Makefile
> > index 6f4200b..e4d0caa 100644
> > --- a/board/bf548-ezkit/Makefile
> > +++ b/board/bf548-ezkit/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf548-ezkit/bf548-ezkit.c
> > b/board/bf548-ezkit/bf548-ezkit.c index cb9ee86..31d6eee 100644
> > --- a/board/bf548-ezkit/bf548-ezkit.c
> > +++ b/board/bf548-ezkit/bf548-ezkit.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf561-acvilon/Makefile b/board/bf561-acvilon/Makefile
> > index 48bec28..08e2fad 100644
> > --- a/board/bf561-acvilon/Makefile
> > +++ b/board/bf561-acvilon/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2007 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf561-ezkit/Makefile b/board/bf561-ezkit/Makefile
> > index 23c7101..3d534d2 100644
> > --- a/board/bf561-ezkit/Makefile
> > +++ b/board/bf561-ezkit/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2007 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf561-ezkit/bf561-ezkit.c
> > b/board/bf561-ezkit/bf561-ezkit.c index 8441838..534c39c 100644
> > --- a/board/bf561-ezkit/bf561-ezkit.c
> > +++ b/board/bf561-ezkit/bf561-ezkit.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf609-ezkit/Makefile b/board/bf609-ezkit/Makefile
> > index 3bfd088..e4184ee 100644
> > --- a/board/bf609-ezkit/Makefile
> > +++ b/board/bf609-ezkit/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/bf609-ezkit/bf609-ezkit.c
> > b/board/bf609-ezkit/bf609-ezkit.c index 86da028..c993ca6 100644
> > --- a/board/bf609-ezkit/bf609-ezkit.c
> > +++ b/board/bf609-ezkit/bf609-ezkit.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2008-2011 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf609-ezkit/soft_switch.c
> > b/board/bf609-ezkit/soft_switch.c index e0c8d93..7c117ea 100644
> > --- a/board/bf609-ezkit/soft_switch.c
> > +++ b/board/bf609-ezkit/soft_switch.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2008-2011 Analog Devices Inc.
> > *
> >
> > diff --git a/board/bf609-ezkit/soft_switch.h
> > b/board/bf609-ezkit/soft_switch.h index d147fe1..75d64e2 100644
> > --- a/board/bf609-ezkit/soft_switch.h
> > +++ b/board/bf609-ezkit/soft_switch.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2008-2011 Analog Devices Inc.
> > *
> >
> > diff --git a/board/blackstamp/Makefile b/board/blackstamp/Makefile
> > index 38e5da7..2ae79da 100644
> > --- a/board/blackstamp/Makefile
> > +++ b/board/blackstamp/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/blackstamp/blackstamp.c
> > b/board/blackstamp/blackstamp.c index 06d004a..d233b8a 100644
> > --- a/board/blackstamp/blackstamp.c
> > +++ b/board/blackstamp/blackstamp.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - blackstamp.c BlackStamp board specific routines
> > + * U-Boot - blackstamp.c BlackStamp board specific routines
> >
> > * Most code stolen from boards/bf533-stamp/bf533-stamp.c
> > * Edited to the BlackStamp by Ben Matthews for UR LLE
> > *
> >
> > diff --git a/board/blackvme/Makefile b/board/blackvme/Makefile
> > index 4ff989a..9a61775 100644
> > --- a/board/blackvme/Makefile
> > +++ b/board/blackvme/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/blackvme/blackvme.c b/board/blackvme/blackvme.c
> > index eccdaf3..d8932ed 100644
> > --- a/board/blackvme/blackvme.c
> > +++ b/board/blackvme/blackvme.c
> > @@ -1,4 +1,4 @@
> > -/* U-boot - blackvme.c board specific routines
> > +/* U-Boot - blackvme.c board specific routines
> >
> > * (c) Wojtek Skulski 2010 info at skutek.com
> > * Board info: http://www.skutek.com
> > * Copyright (c) 2005-2009 Analog Devices Inc.
> >
> > diff --git a/board/br4/Makefile b/board/br4/Makefile
> > index 68e24ab..c6c03ab 100644
> > --- a/board/br4/Makefile
> > +++ b/board/br4/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) Switchfin Org. <dpn at switchfin.org>
> > #
> >
> > diff --git a/board/br4/br4.c b/board/br4/br4.c
> > index bc034e3..6f3f170 100644
> > --- a/board/br4/br4.c
> > +++ b/board/br4/br4.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) Switchfin Org. <dpn at switchfin.org>
> > *
> >
> > diff --git a/board/cm-bf527/Makefile b/board/cm-bf527/Makefile
> > index ff8ad43..1d662c6 100644
> > --- a/board/cm-bf527/Makefile
> > +++ b/board/cm-bf527/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/cm-bf527/cm-bf527.c b/board/cm-bf527/cm-bf527.c
> > index 3186c67..0c2138b 100644
> > --- a/board/cm-bf527/cm-bf527.c
> > +++ b/board/cm-bf527/cm-bf527.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2009 Analog Devices Inc.
> > *
> >
> > diff --git a/board/cm-bf533/Makefile b/board/cm-bf533/Makefile
> > index ec99638..41e100d 100644
> > --- a/board/cm-bf533/Makefile
> > +++ b/board/cm-bf533/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/cm-bf533/cm-bf533.c b/board/cm-bf533/cm-bf533.c
> > index a863195..02ef076 100644
> > --- a/board/cm-bf533/cm-bf533.c
> > +++ b/board/cm-bf533/cm-bf533.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/board/cm-bf537e/Makefile b/board/cm-bf537e/Makefile
> > index be8056f..317098c 100644
> > --- a/board/cm-bf537e/Makefile
> > +++ b/board/cm-bf537e/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/cm-bf537e/cm-bf537e.c b/board/cm-bf537e/cm-bf537e.c
> > index 57c72a2..7e4cfc2 100644
> > --- a/board/cm-bf537e/cm-bf537e.c
> > +++ b/board/cm-bf537e/cm-bf537e.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2009 Analog Devices Inc.
> > *
> >
> > diff --git a/board/cm-bf537u/Makefile b/board/cm-bf537u/Makefile
> > index 38dd3fb..835d5b7 100644
> > --- a/board/cm-bf537u/Makefile
> > +++ b/board/cm-bf537u/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/cm-bf537u/cm-bf537u.c b/board/cm-bf537u/cm-bf537u.c
> > index f365cdb..aad72a9 100644
> > --- a/board/cm-bf537u/cm-bf537u.c
> > +++ b/board/cm-bf537u/cm-bf537u.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2009 Analog Devices Inc.
> > *
> >
> > diff --git a/board/cm-bf548/Makefile b/board/cm-bf548/Makefile
> > index 98aca32..1e11b8c 100644
> > --- a/board/cm-bf548/Makefile
> > +++ b/board/cm-bf548/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/cm-bf548/cm-bf548.c b/board/cm-bf548/cm-bf548.c
> > index 90ce4c3..d9d018b 100644
> > --- a/board/cm-bf548/cm-bf548.c
> > +++ b/board/cm-bf548/cm-bf548.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/board/cm-bf561/Makefile b/board/cm-bf561/Makefile
> > index c8764fb..e0f0c34 100644
> > --- a/board/cm-bf561/Makefile
> > +++ b/board/cm-bf561/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/cm-bf561/cm-bf561.c b/board/cm-bf561/cm-bf561.c
> > index 5741f64..99b7eb2 100644
> > --- a/board/cm-bf561/cm-bf561.c
> > +++ b/board/cm-bf561/cm-bf561.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/board/congatec/cgtqmx6eval/README
> > b/board/congatec/cgtqmx6eval/README index f2c9599..0777c78 100644
> > --- a/board/congatec/cgtqmx6eval/README
> > +++ b/board/congatec/cgtqmx6eval/README
> > @@ -3,10 +3,10 @@ U-Boot for the Congatec QMX6 boards
> >
> > This file contains information for the port of U-Boot to the Congatec
> > QMX6 boards.
> >
> > -1. Building U-boot
> > +1. Building U-Boot
> >
> > ------------------
> >
> > -- Build U-boot for Congatec QMX6 boards:
> >
> > +- Build U-Boot for Congatec QMX6 boards:
> > $ make mrproper
> > $ make cgtqmx6eval_defconfig
> >
> > @@ -17,7 +17,7 @@ This will generate the following binaries:
> > - SPL
> > - u-boot.img
> >
> > -2. Flashing U-boot in the SPI NOR
> > +2. Flashing U-Boot in the SPI NOR
> >
> > ---------------------------------
> >
> > Copy SPL and u-boot.img to the exported TFTP directory of the
> >
> > @@ -41,7 +41,7 @@ host PC (/tftpboot , for example).
> >
> > => sf write 0x12000000 0x10000 0x70000
> >
> > -Reboot the board and the new U-boot should come up.
> > +Reboot the board and the new U-Boot should come up.
> >
> > 3. Booting from the SD card
> > ---------------------------
> >
> > @@ -64,9 +64,9 @@ command:
> > => bmode esdhc4
> >
> > -And then the U-boot from the big slot will boot.
> > +And then the U-Boot from the big slot will boot.
> >
> > -Note: If the "bmode" command is not available from your pre-installed
> > U-boot, +Note: If the "bmode" command is not available from your
> > pre-installed U-Boot,
> >
> > these instruction will produce the same effect:
> >
> > => mw.l 0x20d8040 0x3850
> >
> > diff --git a/board/dnp5370/Makefile b/board/dnp5370/Makefile
> > index 865522f..c0271da 100644
> > --- a/board/dnp5370/Makefile
> > +++ b/board/dnp5370/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2007 Analog Device Inc.
> > #
> >
> > diff --git a/board/dnp5370/dnp5370.c b/board/dnp5370/dnp5370.c
> > index ae9ba84..56e3b02 100644
> > --- a/board/dnp5370/dnp5370.c
> > +++ b/board/dnp5370/dnp5370.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * (C) Copyright 2010 3ality Digital Systems
> > *
> >
> > diff --git a/board/embest/mx6boards/mx6boards.c
> > b/board/embest/mx6boards/mx6boards.c index f8c7468..ad7a8cf 100644
> > --- a/board/embest/mx6boards/mx6boards.c
> > +++ b/board/embest/mx6boards/mx6boards.c
> > @@ -221,7 +221,7 @@ int board_mmc_init(bd_t *bis)
> >
> > /*
> >
> > * According to the board_mmc_init() the following map is done:
> > - * (U-boot device node) (Physical Port)
> > + * (U-Boot device node) (Physical Port)
> >
> > * ** RiOTboard :
> > * mmc0 SDCard slot (bottom)
> > * mmc1 uSDCard slot (top)
> >
> > diff --git a/board/freescale/b4860qds/eth_b4860qds.c
> > b/board/freescale/b4860qds/eth_b4860qds.c index 4b2303e..164ec0a 100644
> > --- a/board/freescale/b4860qds/eth_b4860qds.c
> > +++ b/board/freescale/b4860qds/eth_b4860qds.c
> > @@ -269,7 +269,7 @@ int board_eth_init(bd_t *bis)
> >
> > fm_info_set_phy_address(FM1_DTSEC4,
> >
> > CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
> >
> > /*
> >
> > - * XFI does not need a PHY to work, but to make U-boot
> > + * XFI does not need a PHY to work, but to make U-Boot
> >
> > * happy, assign a fake PHY address for a XFI port.
> > */
> >
> > fm_info_set_phy_address(FM1_10GEC1, 0);
> >
> > diff --git a/board/freescale/bsc9131rdb/README
> > b/board/freescale/bsc9131rdb/README index 4902b98..c83cb7f 100644
> > --- a/board/freescale/bsc9131rdb/README
> > +++ b/board/freescale/bsc9131rdb/README
> > @@ -86,7 +86,7 @@ Default Boot Method
> >
> > --------------------
> > NAND boot
> >
> > -Building U-boot
> > +Building U-Boot
> >
> > --------------
>
> > To build the u-boot for BSC9131RDB:
> and here?
>
> > 1. NAND Flash with sysclk 66MHz(J16 on RDB closed, default)
> >
> > diff --git a/board/freescale/bsc9132qds/README
> > b/board/freescale/bsc9132qds/README index f8377c9..43be51e 100644
> > --- a/board/freescale/bsc9132qds/README
> > +++ b/board/freescale/bsc9132qds/README
> > @@ -87,7 +87,7 @@ Default Boot Method
> >
> > --------------------
> > NOR boot
> >
> > -Building U-boot
> > +Building U-Boot
> >
> > --------------
>
> > To build the u-boot for BSC9132QDS:
> and here?
>
> > 1. NOR Flash
> >
> > diff --git a/board/freescale/ls2080aqds/eth.c
> > b/board/freescale/ls2080aqds/eth.c index ebc9d47..42ff743 100644
> > --- a/board/freescale/ls2080aqds/eth.c
> > +++ b/board/freescale/ls2080aqds/eth.c
> > @@ -716,7 +716,7 @@ void ls2080a_handle_phy_interface_xsgmii(int i)
> >
> > switch (serdes1_prtcl) {
> >
> > case 0x2A:
> > /*
> >
> > - * XFI does not need a PHY to work, but to avoid U-boot
> > use + * XFI does not need a PHY to work, but to avoid
> > U-Boot use
> >
> > * default PHY address which is zero to a MAC when it
> > found * a MAC has no PHY address, we give a PHY address
> > to XFI * MAC, and should not use a real XAUI PHY
> > address, since
> >
> > diff --git a/board/freescale/mpc8313erdb/README
> > b/board/freescale/mpc8313erdb/README index be7ef32..de8bb1f 100644
> > --- a/board/freescale/mpc8313erdb/README
> > +++ b/board/freescale/mpc8313erdb/README
> > @@ -70,7 +70,7 @@ Freescale MPC8313ERDB Board
> >
> > 5. Downloading and Flashing Images
> >
> > -5.1 Reflash U-boot Image using U-boot
> > +5.1 Reflash U-Boot Image using U-Boot
> >
> > NOR flash:
> > diff --git a/board/freescale/mpc8315erdb/README
> > b/board/freescale/mpc8315erdb/README index b32132d..8ad6d81 100644
> > --- a/board/freescale/mpc8315erdb/README
> > +++ b/board/freescale/mpc8315erdb/README
> > @@ -63,7 +63,7 @@ Freescale MPC8315ERDB Board
> >
> > 5. Downloading and Flashing Images
> >
> > -5.1 Reflash U-boot Image using U-boot
> > +5.1 Reflash U-Boot Image using U-Boot
> >
> > NOR flash:
> > diff --git a/board/freescale/mpc8323erdb/README
> > b/board/freescale/mpc8323erdb/README index 6f89829..812fc48 100644
> > --- a/board/freescale/mpc8323erdb/README
> > +++ b/board/freescale/mpc8323erdb/README
> > @@ -22,7 +22,7 @@ Freescale MPC8323ERDB Board
> >
> > 3. Downloading and Flashing Images
> >
> > -3.1 Reflash U-boot Image using U-boot
> > +3.1 Reflash U-Boot Image using U-Boot
> >
> > N.b, have an alternate means of programming
> > the flash available if the new u-boot doesn't boot.
>
> and here?
>
> > diff --git a/board/freescale/mpc832xemds/README
> > b/board/freescale/mpc832xemds/README index 4142aa9..f9ada0d 100644
> > --- a/board/freescale/mpc832xemds/README
> > +++ b/board/freescale/mpc832xemds/README
> > @@ -113,7 +113,7 @@ Freescale MPC832XEMDS Board
> >
> > tftp 10000 u-boot.bin
> >
> > -5.1 Reflash U-boot Image using U-boot
> > +5.1 Reflash U-Boot Image using U-Boot
> >
> > tftp 20000 u-boot.bin
> > protect off fe000000 fe0fffff
> >
> > diff --git a/board/freescale/mpc837xemds/README
> > b/board/freescale/mpc837xemds/README index faf21c9..dbb1517 100644
> > --- a/board/freescale/mpc837xemds/README
> > +++ b/board/freescale/mpc837xemds/README
> > @@ -90,7 +90,7 @@ Freescale MPC837xEMDS Board
> >
> > tftp 40000 u-boot.bin
> >
> > -5.1 Reflash U-boot Image using U-boot
> > +5.1 Reflash U-Boot Image using U-Boot
> >
> > tftp 40000 u-boot.bin
> > protect off fe000000 fe1fffff
> >
> > diff --git a/board/freescale/mpc837xerdb/README
> > b/board/freescale/mpc837xerdb/README index cfb6efa..12df2f2 100644
> > --- a/board/freescale/mpc837xerdb/README
> > +++ b/board/freescale/mpc837xerdb/README
> > @@ -84,7 +84,7 @@ Freescale MPC837xE-RDB Board
> >
> > tftp $loadaddr u-boot.bin
> >
> > -5.1 Reflash U-boot Image using U-boot
> > +5.1 Reflash U-Boot Image using U-Boot
> >
> > tftp $loadaddr u-boot.bin
> > protect off fe000000 fe0fffff
> >
> > diff --git a/board/freescale/mpc8569mds/README
> > b/board/freescale/mpc8569mds/README index 3d12a96..13355fa 100644
> > --- a/board/freescale/mpc8569mds/README
> > +++ b/board/freescale/mpc8569mds/README
> > @@ -3,7 +3,7 @@ Overview
> >
> > MPC8569MDS is composed of two boards - PB (Processor Board) and PIB
> > (Platform I/O Board). The mpc8569 PowerTM processor is mounted on PB
> > board.
> >
> > -Building U-boot
> > +Building U-Boot
> >
> > -----------
> >
> > make MPC8569MDS_config
> > make
> >
> > diff --git a/board/freescale/mpc8572ds/README
> > b/board/freescale/mpc8572ds/README index 57fd2ad..d77db48 100644
> > --- a/board/freescale/mpc8572ds/README
> > +++ b/board/freescale/mpc8572ds/README
> > @@ -3,7 +3,7 @@ Overview
> >
> > MPC8572DS is a high-performance computing, evaluation and development
> > platform supporting the mpc8572 PowerTM processor.
> >
> > -Building U-boot
> > +Building U-Boot
> >
> > -----------
> >
> > make MPC8572DS_config
> > make
> >
> > diff --git a/board/freescale/mpc8610hpcd/README
> > b/board/freescale/mpc8610hpcd/README index 31a9af3..066e625 100644
> > --- a/board/freescale/mpc8610hpcd/README
> > +++ b/board/freescale/mpc8610hpcd/README
> >
> > @@ -27,7 +27,7 @@ To Flash U-Boot into the booting bank:
> > cp.b 1000000 fff00000 $filesize
> >
> > -To Flash U-boot into the alternate bank
> > +To Flash U-Boot into the alternate bank
> >
> > tftp 1000000 u-boot.bin
> > erase fbf00000 +$filesize
> >
> > diff --git a/board/freescale/mpc8641hpcn/README
> > b/board/freescale/mpc8641hpcn/README index d8fe0a4..7d3fc53 100644
> > --- a/board/freescale/mpc8641hpcn/README
> > +++ b/board/freescale/mpc8641hpcn/README
> >
> > @@ -102,7 +102,7 @@ To Flash U-Boot into the booting bank (0xEFC00000 -
0xEFFFFFFF):
> > or use tftpflash command:
> > run tftpflash
> >
> > -To Flash U-boot into the alternative bank (0xEF800000 - 0xEFBFFFFF):
> >
> > +To Flash U-Boot into the alternative bank (0xEF800000 - 0xEFBFFFFF):
> > tftp 1000000 u-boot.bin
> > erase efb00000 +$filesize
> >
> > diff --git a/board/freescale/mx28evk/README
> > b/board/freescale/mx28evk/README index f9d6324..a248fb2 100644
> > --- a/board/freescale/mx28evk/README
> > +++ b/board/freescale/mx28evk/README
> > @@ -1,7 +1,7 @@
> >
> > FREESCALE MX28EVK
> > ==================
> >
> > -Supported hardware: MX28EVK rev C and D are supported in U-boot.
> > +Supported hardware: MX28EVK rev C and D are supported in U-Boot.
> >
> > Files of the MX28EVK port
> > --------------------------
> >
> > diff --git a/board/freescale/mx35pdk/README
> > b/board/freescale/mx35pdk/README index 7232b53..5f3d8d9 100644
> > --- a/board/freescale/mx35pdk/README
> > +++ b/board/freescale/mx35pdk/README
> > @@ -71,7 +71,7 @@ exec -c "noinitrd console=ttymxc0,115200
> > root=/dev/nfsroot rootfstype=nfsroot nf
> >
> > Flashing U-Boot
> > --------------------------------
> >
> > -U-boot should be stored on the NOR flash.
> > +U-Boot should be stored on the NOR flash.
> >
> > The boot storage can be select using the switches on the personality
> > board (SW1-SW2) and on the DEBUG board (SW4-SW10).
> >
> > diff --git a/board/freescale/mx6sabresd/mx6sabresd.c
> > b/board/freescale/mx6sabresd/mx6sabresd.c index d20953d..40524a0 100644
> > --- a/board/freescale/mx6sabresd/mx6sabresd.c
> > +++ b/board/freescale/mx6sabresd/mx6sabresd.c
> > @@ -263,7 +263,7 @@ int board_mmc_init(bd_t *bis)
> >
> > /*
> >
> > * According to the board_mmc_init() the following map is done:
> > - * (U-boot device node) (Physical Port)
> > + * (U-Boot device node) (Physical Port)
> >
> > * mmc0 SD2
> > * mmc1 SD3
> > * mmc2 eMMC
> >
> > diff --git a/board/freescale/mx6slevk/mx6slevk.c
> > b/board/freescale/mx6slevk/mx6slevk.c index 5eab4b5..423fb99 100644
> > --- a/board/freescale/mx6slevk/mx6slevk.c
> > +++ b/board/freescale/mx6slevk/mx6slevk.c
> > @@ -197,7 +197,7 @@ int board_mmc_init(bd_t *bis)
> >
> > /*
> >
> > * According to the board_mmc_init() the following map is done:
> > - * (U-boot device node) (Physical Port)
> > + * (U-Boot device node) (Physical Port)
> >
> > * mmc0 USDHC1
> > * mmc1 USDHC2
> > * mmc2 USDHC3
> >
> > diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
> > b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 56dc020..33a2a51
> > 100644
> > --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
> > +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
> > @@ -340,7 +340,7 @@ int board_mmc_init(bd_t *bis)
> >
> > /*
> >
> > * According to the board_mmc_init() the following map is done:
> > - * (U-boot device node) (Physical Port)
> > + * (U-Boot device node) (Physical Port)
> >
> > * mmc0 USDHC2
> > * mmc1 USDHC3
> > * mmc2 USDHC4
> >
> > diff --git a/board/freescale/mx6ul_14x14_evk/README
> > b/board/freescale/mx6ul_14x14_evk/README index d48c7ba..1edccf6 100644
> > --- a/board/freescale/mx6ul_14x14_evk/README
> > +++ b/board/freescale/mx6ul_14x14_evk/README
> > @@ -1,7 +1,7 @@
> > -How to use U-boot on Freescale MX6UL 14x14 EVK
> > +How to use U-Boot on Freescale MX6UL 14x14 EVK
> >
> > -----------------------------------------------
> >
> > -- Build U-boot for MX6UL 14x14 EVK:
> >
> > +- Build U-Boot for MX6UL 14x14 EVK:
> > $ make mrproper
> > $ make mx6ul_14x14_evk_defconfig
> >
> > @@ -28,5 +28,5 @@ switch label numbers reference).
> >
> > - Connect the USB cable between the EVK and the PC for the console.
> > (The USB console connector is the one close the push buttons)
> >
> > -- Insert the micro SD card in the board, power it up and U-boot messages
> > should +- Insert the micro SD card in the board, power it up and U-Boot
> > messages should
> >
> > come up.
> >
> > diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
> > b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index
> > b9b3573..98d5675 100644
> > --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
> > +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
> > @@ -394,7 +394,7 @@ int board_mmc_init(bd_t *bis)
> >
> > /*
> >
> > * According to the board_mmc_init() the following map is done:
> > - * (U-boot device node) (Physical Port)
> > + * (U-Boot device node) (Physical Port)
> >
> > * mmc0 USDHC1
> > * mmc1 USDHC2
> > */
> >
> > diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c
> > b/board/freescale/mx7dsabresd/mx7dsabresd.c index bbcc5bb..db0f1b4
> > 100644
> > --- a/board/freescale/mx7dsabresd/mx7dsabresd.c
> > +++ b/board/freescale/mx7dsabresd/mx7dsabresd.c
> > @@ -376,7 +376,7 @@ int board_mmc_init(bd_t *bis)
> >
> > int i, ret;
> > /*
> >
> > * According to the board_mmc_init() the following map is done:
> > - * (U-boot device node) (Physical Port)
> > + * (U-Boot device node) (Physical Port)
> >
> > * mmc0 USDHC1
> > * mmc2 USDHC3 (eMMC)
> > */
> >
> > diff --git a/board/freescale/t102xqds/README
> > b/board/freescale/t102xqds/README index bb0f280..fef9cec 100644
> > --- a/board/freescale/t102xqds/README
> > +++ b/board/freescale/t102xqds/README
> > @@ -294,7 +294,7 @@ Run time view of SPL framework
> >
> > -------------------------------------------------
> >
> > |STACK | 0xFFFD8000 (22KB) |
> >
> > -------------------------------------------------
> >
> > -|U-boot SPL | 0xFFFD8000 (160KB) |
> > +|U-Boot SPL | 0xFFFD8000 (160KB) |
> >
> > -------------------------------------------------
> >
> > NAND Flash memory Map on T1024QDS
> >
> > diff --git a/board/freescale/t102xqds/eth_t102xqds.c
> > b/board/freescale/t102xqds/eth_t102xqds.c index ca54e2a..19543c0 100644
> > --- a/board/freescale/t102xqds/eth_t102xqds.c
> > +++ b/board/freescale/t102xqds/eth_t102xqds.c
> > @@ -310,7 +310,7 @@ int board_eth_init(bd_t *bis)
> >
> > case 0x95:
> >
> > case 0x99:
> > /*
> >
> > - * XFI does not need a PHY to work, but to avoid U-boot
> > use + * XFI does not need a PHY to work, but to avoid
> > U-Boot use
> >
> > * default PHY address which is zero to a MAC when it
> > found * a MAC has no PHY address, we give a PHY address
> > to XFI * MAC, and should not use a real XAUI PHY
> > address, since
> >
> > diff --git a/board/freescale/t102xrdb/README
> > b/board/freescale/t102xrdb/README index 7d3794a..1c5e027 100644
> > --- a/board/freescale/t102xrdb/README
> > +++ b/board/freescale/t102xrdb/README
> > @@ -276,7 +276,7 @@ Run time view of SPL framework
> >
> > -------------------------------------------------
> >
> > |STACK | 0xFFFD8000 (22KB) |
> >
> > -------------------------------------------------
> >
> > -|U-boot SPL | 0xFFFD8000 (160KB) |
> > +|U-Boot SPL | 0xFFFD8000 (160KB) |
> >
> > -------------------------------------------------
> >
> > NAND Flash memory Map on T1024RDB
> >
> > diff --git a/board/freescale/t1040qds/README
> > b/board/freescale/t1040qds/README index 8160ca0..dc0676b 100644
> > --- a/board/freescale/t1040qds/README
> > +++ b/board/freescale/t1040qds/README
> > @@ -138,7 +138,7 @@ Various Software configurations/environment
> > variables/commands
> >
> > --------------------------------------------------------------
> > The below commands apply to T1040QDS
> >
> > -1. U-boot environment variable hwconfig
> > +1. U-Boot environment variable hwconfig
> >
> > The default hwconfig is:
> > hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1:
> > dr_mode=host,phy_type=utmi
> >
> > diff --git a/board/freescale/t104xrdb/README
> > b/board/freescale/t104xrdb/README index b9d2212..33b2824 100644
> > --- a/board/freescale/t104xrdb/README
> > +++ b/board/freescale/t104xrdb/README
> > @@ -206,7 +206,7 @@ Various Software configurations/environment
> > variables/commands
> >
> > --------------------------------------------------------------
> > The below commands apply to the board
> >
> > -1. U-boot environment variable hwconfig
> > +1. U-Boot environment variable hwconfig
> >
> > The default hwconfig is:
> > hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1:
> > dr_mode=host,phy_type=utmi
> >
> > @@ -250,7 +250,7 @@ SPL has following features:
> > -----------------------------------------------
> > STACK | 0xFFFD8000 (22KB) |
> > -----------------------------------------------
> >
> > - U-boot SPL | 0xFFFD8000 (160KB) |
> > + U-Boot SPL | 0xFFFD8000 (160KB) |
> >
> > -----------------------------------------------
> >
> > NAND Flash memory Map on T104xRDB
> >
> > diff --git a/board/freescale/t208xqds/README
> > b/board/freescale/t208xqds/README index 83060c1..f48c9a5 100755
> > --- a/board/freescale/t208xqds/README
> > +++ b/board/freescale/t208xqds/README
> >
> > @@ -92,7 +92,7 @@ XFI:
> > 10GBASE-KR scenario.
> > So, for XFI usage, there are two scenarios, one will use fiber cable,
> > another will use copper cable. An hwconfig env "fsl_10gkr_copper" is
> >
> > - introduced to indicate a XFI port will use copper cable, and U-boot
> > + introduced to indicate a XFI port will use copper cable, and U-Boot
> >
> > will fixup the dtb accordingly.
> > It's used as: fsl_10gkr_copper:<10g_mac_name>
> > The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm1_10g3, fm1_10g4, they
> >
> > @@ -108,7 +108,7 @@ XFI:
> > - T2080QDS can support 1G-KX by using SGMII protocol, but serdes lane
> > runs in 1G-KX mode. By default, the lane runs in SGMII mode, to set a
> > lane in 1G-KX mode, need to set corresponding bit in SerDes Protocol
> > Configuration
> >
> > - Register 1 (PCCR1), and U-boot fixup the dtb for kernel to do proper
> > + Register 1 (PCCR1), and U-Boot fixup the dtb for kernel to do proper
> >
> > initialization.
> > Hwconfig "fsl_1gkx" is used to indicate a lane runs in 1G-KX mode, MAC
> > 1/2/5/6/9/10 are available for 1G-KX, MAC 3/4 run in RGMII mode. To set
> > a
> >
> > @@ -237,7 +237,7 @@ Run time view of SPL framework
> >
> > -------------------------------------------------
> >
> > |STACK | 0xFFFD8000 (22KB) |
> >
> > -------------------------------------------------
> >
> > -|U-boot SPL | 0xFFFD8000 (160KB) |
> > +|U-Boot SPL | 0xFFFD8000 (160KB) |
> >
> > -------------------------------------------------
> >
> > NAND Flash memory Map on T2080QDS
> >
> > diff --git a/board/freescale/t208xqds/eth_t208xqds.c
> > b/board/freescale/t208xqds/eth_t208xqds.c index f08cff2..e92b5d3 100644
> > --- a/board/freescale/t208xqds/eth_t208xqds.c
> > +++ b/board/freescale/t208xqds/eth_t208xqds.c
> > @@ -600,7 +600,7 @@ int board_eth_init(bd_t *bis)
> >
> > case 0x66:
> >
> > case 0x67:
> > /*
> >
> > - * XFI does not need a PHY to work, but to avoid U-boot
> > use + * XFI does not need a PHY to work, but to avoid
> > U-Boot use
> >
> > * default PHY address which is zero to a MAC when it
> > found * a MAC has no PHY address, we give a PHY address
> > to XFI * MAC, and should not use a real XAUI PHY
> > address, since
> >
> > diff --git a/board/freescale/t208xrdb/README
> > b/board/freescale/t208xrdb/README index 24484cd..c27c211 100644
> > --- a/board/freescale/t208xrdb/README
> > +++ b/board/freescale/t208xrdb/README
> > @@ -218,7 +218,7 @@ Run time view of SPL framework
> >
> > -------------------------------------------------
> >
> > |STACK | 0xFFFD8000 (22KB) |
> >
> > -------------------------------------------------
> >
> > -|U-boot SPL | 0xFFFD8000 (160KB) |
> > +|U-Boot SPL | 0xFFFD8000 (160KB) |
> >
> > -------------------------------------------------
> >
> > NAND Flash memory Map on T2080RDB
> >
> > diff --git a/board/freescale/t4qds/README b/board/freescale/t4qds/README
> > index 3962fee..345b4df 100644
> > --- a/board/freescale/t4qds/README
> > +++ b/board/freescale/t4qds/README
> > @@ -86,7 +86,7 @@ Board Features
> >
> > 10GBASE-KR scenario.
> > So, for XFI usage, there are two scenarios, one will use fiber
> > cable, another will use copper cable. An hwconfig env
> > "fsl_10gkr_copper" is
> >
> > - introduced to indicate a XFI port will use copper cable, and
> > U-boot + introduced to indicate a XFI port will use copper cable,
> > and U-Boot
> >
> > will fixup the dtb accordingly.
> > It's used as: fsl_10gkr_copper:<10g_mac_name>
> > The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm2_10g1, fm2_10g2,
> > they
> >
> > @@ -118,7 +118,7 @@ The physical address of the last (boot page
> > translation) varies with the actual
> >
> > Voltage ID and VDD override
> > --------------------
> >
> > -T4240 has a VID feature. U-boot reads the VID efuses and adjust the
> > voltage +T4240 has a VID feature. U-Boot reads the VID efuses and adjust
> > the voltage
> >
> > accordingly. The voltage can also be override by command vdd_override.
> > The syntax is
> >
> > @@ -165,7 +165,7 @@ Run time view of SPL framework
> >
> > -------------------------------------------------
> >
> > |STACK | 0xFFFD8000 (22KB) |
> >
> > -------------------------------------------------
> >
> > -|U-boot SPL | 0xFFFD8000 (160KB) |
> > +|U-Boot SPL | 0xFFFD8000 (160KB) |
> >
> > -------------------------------------------------
> >
> > NAND Flash memory Map on T4QDS
> >
> > diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c
> > index 83a3a9b..95f8c04 100644
> > --- a/board/freescale/t4qds/eth.c
> > +++ b/board/freescale/t4qds/eth.c
> > @@ -658,7 +658,7 @@ int board_eth_init(bd_t *bis)
> >
> > switch (fm_info_get_enet_if(i)) {
> >
> > case PHY_INTERFACE_MODE_XGMII:
> > if ((srds_prtcl_s2 == 55) || (srds_prtcl_s2 ==
> > 57)) {
> >
> > - /* A fake PHY address to make U-boot
> > happy */ + /* A fake PHY address to make
> > U-Boot happy */
> >
> > fm_info_set_phy_address(i, i);
> >
> > } else {
> >
> > lane = serdes_get_first_lane(FSL_SRDS_1,
> >
> > @@ -839,7 +839,7 @@ int board_eth_init(bd_t *bis)
> >
> > switch (fm_info_get_enet_if(i)) {
> >
> > case PHY_INTERFACE_MODE_XGMII:
> > if ((srds_prtcl_s2 == 55) || (srds_prtcl_s2 ==
> > 57)) {
> >
> > - /* A fake PHY address to make U-boot
> > happy */ + /* A fake PHY address to make
> > U-Boot happy */
> >
> > fm_info_set_phy_address(i, i);
> >
> > } else {
> >
> > lane = serdes_get_first_lane(FSL_SRDS_2,
> >
> > diff --git a/board/gateworks/gw_ventana/README
> > b/board/gateworks/gw_ventana/README index 697e5c8..a4443cd 100644
> > --- a/board/gateworks/gw_ventana/README
> > +++ b/board/gateworks/gw_ventana/README
> > @@ -104,7 +104,7 @@ More details about the i.MX6 BOOT ROM can be found in
> > the IMX6 reference manual.
> >
> > When the IMX6 eFUSE settings have been factory programmed to boot from
> > micro-SD the SPL will be loaded from offset 0x400 (1KB). Once the SPL is
> >
> > -booted, it will load and execute U-boot (u-boot.img) from offset 69KB
> > +booted, it will load and execute U-Boot (u-boot.img) from offset 69KB
> >
> > on the micro-SD (defined by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR).
> >
> > While it is technically possible to enable the SPL to be able to load
> >
> > diff --git a/board/ibf-dsp561/Makefile b/board/ibf-dsp561/Makefile
> > index 5b05ba8..cbf1612 100644
> > --- a/board/ibf-dsp561/Makefile
> > +++ b/board/ibf-dsp561/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2007 Analog Device Inc.
> > #
> >
> > diff --git a/board/ibf-dsp561/ibf-dsp561.c
> > b/board/ibf-dsp561/ibf-dsp561.c index d2ac7a5..8475fda 100644
> > --- a/board/ibf-dsp561/ibf-dsp561.c
> > +++ b/board/ibf-dsp561/ibf-dsp561.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2008-2009 I-SYST.
> > *
> >
> > diff --git a/board/imgtec/malta/malta.c b/board/imgtec/malta/malta.c
> > index cae4a21..f88a3b2 100644
> > --- a/board/imgtec/malta/malta.c
> > +++ b/board/imgtec/malta/malta.c
> > @@ -93,7 +93,7 @@ int checkboard(void)
> >
> > {
> >
> > enum core_card core;
> >
> > - malta_lcd_puts("U-boot");
> > + malta_lcd_puts("U-Boot");
> >
> > puts("Board: MIPS Malta");
> >
> > core = malta_core_card();
> >
> > diff --git a/board/ip04/Makefile b/board/ip04/Makefile
> > index caba16f..44fa684 100644
> > --- a/board/ip04/Makefile
> > +++ b/board/ip04/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2010 Analog Device Inc.
> > #
> >
> > diff --git a/board/ip04/ip04.c b/board/ip04/ip04.c
> > index 70765bc..c7bc334 100644
> > --- a/board/ip04/ip04.c
> > +++ b/board/ip04/ip04.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2007 David Rowe,
> > * (c) 2006 Ivan Danov
> >
> > diff --git a/board/keymile/km83xx/README.kmeter1
> > b/board/keymile/km83xx/README.kmeter1 index 7f4fc99..b85d776 100644
> > --- a/board/keymile/km83xx/README.kmeter1
> > +++ b/board/keymile/km83xx/README.kmeter1
> > @@ -60,7 +60,7 @@ Keymile kmeter1 Board
> >
> > Bytes transferred = 204204 (31dac hex)
> > =>
> >
> > -4.1 Reflash U-boot Image using U-boot
> > +4.1 Reflash U-Boot Image using U-Boot
> >
> > => run update
> > ..... done
> >
> > diff --git a/board/pr1/Makefile b/board/pr1/Makefile
> > index 4f375a8..8caa360 100644
> > --- a/board/pr1/Makefile
> > +++ b/board/pr1/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) Switchfin Org. <dpn at switchfin.org>
> > #
> >
> > diff --git a/board/pr1/pr1.c b/board/pr1/pr1.c
> > index bb907f3..3fffabd 100644
> > --- a/board/pr1/pr1.c
> > +++ b/board/pr1/pr1.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) Switchfin Org. <dpn at switchfin.org>
> > *
> >
> > diff --git a/board/sbc8349/README b/board/sbc8349/README
> > index e2d60cc..5d17341 100644
> > --- a/board/sbc8349/README
> > +++ b/board/sbc8349/README
> > @@ -30,14 +30,14 @@ image.
> >
> > Restoring a corrupted or missing flash image:
> > =============================================
> >
> > -Note that U-boot versions up to and including 2009.06 had essentially
> > +Note that U-Boot versions up to and including 2009.06 had essentially
> >
> > two copies of u-boot in flash; one at the very beginning, which set
>
> and here?
>
> > the HRCW, and one at the very end, which was the image that was run.
> > As of this point in time, the two have been combined into just one
> > at the beginning of flash, which provides both the HRCW, and the image
> > that is executed. This frees up the remainder of flash for other uses.
> > Use of the u-boot command "fli" will indicate what parts are in use.
>
> and here?
>
> > -Details for storing U-boot to flash using a Wind River ICE can be found
> > +Details for storing U-Boot to flash using a Wind River ICE can be found
> >
> > on page 19 of the board manual (request ERG-00328-001). The following
> >
> > is a summary of that information:
> > diff --git a/board/sbc8548/README b/board/sbc8548/README
> > index feac5e3..cfce954 100644
> > --- a/board/sbc8548/README
> > +++ b/board/sbc8548/README
> > @@ -7,7 +7,7 @@ memory. It also has 128MB SDRAM 100MHz LBC memory, with
> > both a PCI-e,
> >
> > and a PCI-X slot, dual mini-DB9 for UART, and dual RJ-45 for eTSEC
> > ethernet connections.
> >
> > -U-boot Configuration:
> >
> > +U-Boot Configuration:
> > =====================
>
> > The following possible u-boot configuration targets are available:
> and here?
>
> > @@ -100,7 +100,7 @@ from the board's socket to resolve the above i2c
> > address overlap
> >
> > issue and allow SPD autodetection of RAM to work.
> >
> > -Updating U-boot with U-boot:
> >
> > +Updating U-Boot with U-Boot:
> > ============================
> >
> > Note that versions of u-boot up to and including 2009.08 had u-boot
> > stored
>
> and here?
>
> > diff --git a/board/seco/mx6quq7/mx6quq7.c b/board/seco/mx6quq7/mx6quq7.c
> > index ea1d4b8..e7523f1 100644
> > --- a/board/seco/mx6quq7/mx6quq7.c
> > +++ b/board/seco/mx6quq7/mx6quq7.c
> > @@ -103,7 +103,7 @@ int board_mmc_init(bd_t *bis)
> >
> > /*
> >
> > * Following map is done:
> > - * (U-boot device node) (Physical Port)
> > + * (U-Boot device node) (Physical Port)
> >
> > * mmc0 eMMC on Board
> > * mmc1 Ext SD
> > */
> >
> > diff --git a/board/solidrun/mx6cuboxi/README
> > b/board/solidrun/mx6cuboxi/README index b417ff0..5d0a45d 100644
> > --- a/board/solidrun/mx6cuboxi/README
> > +++ b/board/solidrun/mx6cuboxi/README
> > @@ -1,7 +1,7 @@
> > -How to use U-boot on Solid-run mx6 Hummingboard and Cubox-i
> > +How to use U-Boot on Solid-run mx6 Hummingboard and Cubox-i
> >
> > -----------------------------------------------------------
> >
> > -- Build U-boot for Hummingboard/Cubox-i:
> >
> > +- Build U-Boot for Hummingboard/Cubox-i:
> > $ make mrproper
> > $ make mx6cuboxi_defconfig
> >
> > @@ -17,5 +17,5 @@ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
> >
> > sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
> >
> > -- Insert the SD card in the board, power it up and U-boot messages
> > should +- Insert the SD card in the board, power it up and U-Boot
> > messages should
> >
> > come up.
Joe, would you please be of such kind heart to not quote billion lines of
useless stuff and just trim the reply to the relevant bits/files ? Thanks
> > diff --git a/board/tbs/tbs2910/tbs2910.c b/board/tbs/tbs2910/tbs2910.c
> > index 0b509b6..7707cf5 100644
> > --- a/board/tbs/tbs2910/tbs2910.c
> > +++ b/board/tbs/tbs2910/tbs2910.c
> > @@ -220,7 +220,7 @@ int board_mmc_getcd(struct mmc *mmc)
> >
> > int board_mmc_init(bd_t *bis)
> > {
> >
> > /*
> >
> > - * (U-boot device node) (Physical Port)
> > + * (U-Boot device node) (Physical Port)
> >
> > * mmc0 SD2
> > * mmc1 SD3
> > * mmc2 eMMC
> >
> > diff --git a/board/tcm-bf518/Makefile b/board/tcm-bf518/Makefile
> > index 2e029f5..1ce8f64 100644
> > --- a/board/tcm-bf518/Makefile
> > +++ b/board/tcm-bf518/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/tcm-bf518/tcm-bf518.c b/board/tcm-bf518/tcm-bf518.c
> > index 4348678..7923eae 100644
> > --- a/board/tcm-bf518/tcm-bf518.c
> > +++ b/board/tcm-bf518/tcm-bf518.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2008-2009 Analog Devices Inc.
> > *
> >
> > diff --git a/board/tcm-bf537/Makefile b/board/tcm-bf537/Makefile
> > index 93a01e4..0fe25e8 100644
> > --- a/board/tcm-bf537/Makefile
> > +++ b/board/tcm-bf537/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# U-boot - Makefile
> > +# U-Boot - Makefile
> >
> > #
> > # Copyright (c) 2005-2008 Analog Device Inc.
> > #
> >
> > diff --git a/board/tcm-bf537/tcm-bf537.c b/board/tcm-bf537/tcm-bf537.c
> > index 2cf70ca..19df51a 100644
> > --- a/board/tcm-bf537/tcm-bf537.c
> > +++ b/board/tcm-bf537/tcm-bf537.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - main board file
> > + * U-Boot - main board file
> >
> > *
> > * Copyright (c) 2005-2009 Analog Devices Inc.
> > *
> >
> > diff --git a/board/ti/ks2_evm/README b/board/ti/ks2_evm/README
> > index 0fe5c3b..191d7d4 100644
> > --- a/board/ti/ks2_evm/README
> > +++ b/board/ti/ks2_evm/README
> > @@ -126,7 +126,7 @@ SPI NOR Flash programming instructions
> >
> > U-Boot image can be flashed to first 512KB of the NOR flash using
> > following
> >
> > instructions:
> > -1. Start CCS and run U-boot as described above.
> > +1. Start CCS and run U-Boot as described above.
> >
> > 2. Suspend Target. Select Run -> Suspend from top level menu
> >
> > CortexA15_1 (Free Running)"
> >
> > 3. Load u-boot-spi.gph binary from build folder on to DDR address
> > 0x87000000
> >
> > @@ -147,7 +147,7 @@ AEMIF NAND Flash programming instructions
> >
> > U-Boot image can be flashed to first 1024KB of the NAND flash using
> > following
> >
> > instructions:
> > -1. Start CCS and run U-boot as described above.
> > +1. Start CCS and run U-Boot as described above.
> >
> > 2. Suspend Target. Select Run -> Suspend from top level menu
> >
> > CortexA15_1 (Free Running)"
> >
> > 3. Load MLO binary from build folder on to DDR address 0x87000000
> >
> > diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c
> > index 8656782..7fc57da 100644
> > --- a/board/tqc/tqma6/tqma6.c
> > +++ b/board/tqc/tqma6/tqma6.c
> > @@ -77,7 +77,7 @@ static iomux_v3_cfg_t const tqma6_usdhc3_pads[] = {
> >
> > /*
> >
> > * According to board_mmc_init() the following map is done:
> > - * (U-boot device node) (Physical Port)
> > + * (U-Boot device node) (Physical Port)
> >
> > * mmc0 eMMC (SD3) on TQMa6
> > * mmc1 .. n optional slots used on baseboard
> > */
> >
> > diff --git a/board/wandboard/README b/board/wandboard/README
> > index c6c0132..6345416 100644
> > --- a/board/wandboard/README
> > +++ b/board/wandboard/README
> > @@ -9,7 +9,7 @@ SoCs: mx6 quad, mx6 dual lite and mx6 solo.
> >
> > For more details about Wandboard, please refer to:
> > http://www.wandboard.org/
> >
> > -Building U-boot for Wandboard
> > +Building U-Boot for Wandboard
> >
> > -----------------------------
> >
> > To build U-Boot for the Wandboard:
> > @@ -17,7 +17,7 @@ To build U-Boot for the Wandboard:
> > $ make wandboard_config
> > $ make
> >
> > -Flashing U-boot into the SD card
> > +Flashing U-Boot into the SD card
> >
> > --------------------------------
> >
> > - After the 'make' command completes, the generated 'SPL' binary must be
> >
> > @@ -36,4 +36,4 @@ as the mx6 processor)
> >
> > - Connect the serial cable to the host PC
> >
> > -- Power up the board and U-boot messages will appear in the serial
> > console. +- Power up the board and U-Boot messages will appear in the
> > serial console. diff --git a/board/wandboard/wandboard.c
> > b/board/wandboard/wandboard.c index ac001ed..4ce74cd 100644
> > --- a/board/wandboard/wandboard.c
> > +++ b/board/wandboard/wandboard.c
> > @@ -155,7 +155,7 @@ int board_mmc_init(bd_t *bis)
> >
> > /*
> >
> > * Following map is done:
> > - * (U-boot device node) (Physical Port)
> > + * (U-Boot device node) (Physical Port)
> >
> > * mmc0 SOM MicroSD
> > * mmc1 Carrier board MicroSD
> > */
> >
> > diff --git a/board/warp/README b/board/warp/README
> > index 22f9055..3cfd22e 100644
> > --- a/board/warp/README
> > +++ b/board/warp/README
> > @@ -1,4 +1,4 @@
> > -How to Update U-boot on Warp board
> > +How to Update U-Boot on Warp board
> >
> > ----------------------------------
> >
> > Required software on the host PC:
> > @@ -7,13 +7,13 @@ Required software on the host PC:
> > - dfu-util: http://dfu-util.sourceforge.net/releases/
> >
> > -Build U-boot for Warp:
> >
> > +Build U-Boot for Warp:
> > $ make mrproper
> > $ make warp_config
> > $ make
> >
> > -This will generate the U-boot binary called u-boot.imx.
> > +This will generate the U-Boot binary called u-boot.imx.
> >
> > Put warp board in USB download mode
> >
> > @@ -29,7 +29,7 @@ Load u-boot.imx via USB:
> > $ sudo ./imx_usb u-boot.imx
> >
> > -Then U-boot should start and its messages will appear in the console
> > program. +Then U-Boot should start and its messages will appear in the
> > console program.
> >
> > Use the default environment variables:
> > @@ -43,7 +43,7 @@ Transfer u-boot.imx that will be flashed into the eMMC:
> > $ sudo dfu-util -D u-boot.imx -a boot
> >
> > -Then on the U-boot prompt the following message should be seen after a
> > +Then on the U-Boot prompt the following message should be seen after a
> >
> > successful upgrade:
> >
> > #DOWNLOAD ... OK
> >
> > @@ -53,4 +53,4 @@ Remove power from the warp board.
> >
> > Put warp board into normal boot mode
> >
> > -Power up the board and the new updated U-boot should boot from eMMC
> > +Power up the board and the new updated U-Boot should boot from eMMC
> > diff --git a/cmd/bootldr.c b/cmd/bootldr.c
> > index bc5c1f9..38b3b2f 100644
> > --- a/cmd/bootldr.c
> > +++ b/cmd/bootldr.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - bootldr.c
> > + * U-Boot - bootldr.c
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/cmd/cramfs.c b/cmd/cramfs.c
> > index 1d31326..270701b 100644
> > --- a/cmd/cramfs.c
> > +++ b/cmd/cramfs.c
> > @@ -77,7 +77,7 @@ extern int cramfs_ls (struct part_info *info, char
> > *filename);
> >
> > extern int cramfs_info (struct part_info *info);
> >
> > /***************************************************/
> >
> > -/* U-boot commands */
> > +/* U-Boot commands */
> >
> > /***************************************************/
> >
> > /**
> >
> > diff --git a/cmd/jffs2.c b/cmd/jffs2.c
> > index bce0983..0b2eefa 100644
> > --- a/cmd/jffs2.c
> > +++ b/cmd/jffs2.c
> > @@ -456,7 +456,7 @@ static struct part_info* jffs2_part_info(struct
> > mtd_device *dev, unsigned int pa
> >
> > }
> >
> > /***************************************************/
> >
> > -/* U-boot commands */
> > +/* U-Boot commands */
> >
> > /***************************************************/
> >
> > /**
> >
> > diff --git a/cmd/ldrinfo.c b/cmd/ldrinfo.c
> > index 2aa56bd..2b49297 100644
> > --- a/cmd/ldrinfo.c
> > +++ b/cmd/ldrinfo.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - ldrinfo
> > + * U-Boot - ldrinfo
> >
> > *
> > * Copyright (c) 2010 Analog Devices Inc.
> > *
> >
> > diff --git a/cmd/mtdparts.c b/cmd/mtdparts.c
> > index dab1958..86a4689 100644
> > --- a/cmd/mtdparts.c
> > +++ b/cmd/mtdparts.c
> > @@ -1877,7 +1877,7 @@ static struct part_info* mtd_part_info(struct
> > mtd_device *dev, unsigned int part
> >
> > }
> >
> > /***************************************************/
> >
> > -/* U-boot commands */
> > +/* U-Boot commands */
> >
> > /***************************************************/
> > /* command line only */
> > /**
> >
> > diff --git a/cmd/pxe.c b/cmd/pxe.c
> > index 080b376..9434a18 100644
> > --- a/cmd/pxe.c
> > +++ b/cmd/pxe.c
> > @@ -571,7 +571,7 @@ static void label_print(void *data)
> >
> > /*
> >
> > * Boot a label that specified 'localboot'. This requires that the
> > 'localcmd'
> >
> > - * environment variable is defined. Its contents will be executed as
> > U-boot + * environment variable is defined. Its contents will be
> > executed as U-Boot
> >
> > * command. If the label specified an 'append' line, its contents will
> > be * used to overwrite the contents of the 'bootargs' environment
> > variable prior * to running 'localcmd'.
> >
> > @@ -1438,7 +1438,7 @@ static struct pxe_menu *parse_pxefile(cmd_tbl_t
> > *cmdtp, unsigned long menucfg)
> >
> > }
> >
> > /*
> >
> > - * Converts a pxe_menu struct into a menu struct for use with U-boot's
> > generic + * Converts a pxe_menu struct into a menu struct for use with
> > U-Boot's generic
> >
> > * menu code.
> > */
> >
> > static struct menu *pxe_menu_to_menu(struct pxe_menu *cfg)
> >
> > diff --git a/cmd/spibootldr.c b/cmd/spibootldr.c
> > index ca76dde..acbb0f6 100644
> > --- a/cmd/spibootldr.c
> > +++ b/cmd/spibootldr.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - spibootldr.c
> > + * U-Boot - spibootldr.c
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/common/image-fdt.c b/common/image-fdt.c
> > index 5e4e5bd..79fa655 100644
> > --- a/common/image-fdt.c
> > +++ b/common/image-fdt.c
> >
> > @@ -450,7 +450,7 @@ error:
> > * addresses of some of the devices in the device tree are compared with
> > the * actual addresses at which U-Boot has placed them.
> > *
> >
> > - * Returns 1 on success, 0 on failure. If 0 is returned, U-boot will
> > halt the + * Returns 1 on success, 0 on failure. If 0 is returned,
> > U-Boot will halt the
> >
> > * boot process.
> > */
> >
> > __weak int ft_verify_fdt(void *fdt)
> >
> > diff --git a/common/image.c b/common/image.c
> > index f4a1dc8..75b1104 100644
> > --- a/common/image.c
> > +++ b/common/image.c
> > @@ -1265,7 +1265,7 @@ int boot_get_loadable(int argc, char * const
> > argv[], bootm_headers_t *images,
> >
> > * @cmd_end: pointer to a ulong variable, will hold cmdline end
> > *
> > * boot_get_cmdline() allocates space for kernel command line below
> >
> > - * BOOTMAPSZ + getenv_bootm_low() address. If "bootargs" U-boot
> > environemnt + * BOOTMAPSZ + getenv_bootm_low() address. If "bootargs"
> > U-Boot environemnt
> >
> > * variable is present its contents is copied to allocated kernel
> > * command line.
> > *
> >
> > diff --git a/common/kgdb_stubs.c b/common/kgdb_stubs.c
> > index 19b0c18..5278209 100644
> > --- a/common/kgdb_stubs.c
> > +++ b/common/kgdb_stubs.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - stub functions for common kgdb code,
> > + * U-Boot - stub functions for common kgdb code,
> >
> > * can be overridden in board specific files
> > *
> > * Copyright 2009 Analog Devices Inc.
> >
> > diff --git a/doc/README.440-DDR-performance
> > b/doc/README.440-DDR-performance index 17bc747..66b97bc 100644
> > --- a/doc/README.440-DDR-performance
> > +++ b/doc/README.440-DDR-performance
> >
> > @@ -9,7 +9,7 @@ performance changes:
> > ----------------------------------------
> >
> > -SDRAM0_CFG0[PMU] = 1 (U-boot default for Bamboo, Yosemite and
> > Yellowstone) +SDRAM0_CFG0[PMU] = 1 (U-Boot default for Bamboo, Yosemite
> > and Yellowstone)
> >
> > ----------------------------------------
> > Stream benchmark results
> > -------------------------------------------------------------
> >
> > diff --git a/doc/README.arm64 b/doc/README.arm64
> > index f32108f..5127c05 100644
> > --- a/doc/README.arm64
> > +++ b/doc/README.arm64
> > @@ -1,4 +1,4 @@
> > -U-boot for arm64
> > +U-Boot for arm64
> >
> > Summary
> > =======
> >
> > @@ -11,7 +11,7 @@ Notes
> >
> > 1. Currenly, u-boot run at the highest exception level processor
>
> and here?
>
> > supported and jump to EL2 or optionally EL1 before enter OS.
> >
> > -2. U-boot for arm64 is compiled with AArch64-gcc. AArch64-gcc
> > +2. U-Boot for arm64 is compiled with AArch64-gcc. AArch64-gcc
> >
> > use rela relocation format, a tool(tools/relocate-rela) by Scott Wood
> > is used to encode the initial addend of rela to u-boot.bin. After
> > running, the u-boot will be relocated to destination again.
>
> and here?
>
> > diff --git a/doc/README.b4860qds b/doc/README.b4860qds
> > index 6fcc3bd..76ecfaa 100644
> > --- a/doc/README.b4860qds
> > +++ b/doc/README.b4860qds
> > @@ -246,7 +246,7 @@ Various Software configurations/environment
> > variables/commands
> >
> > --------------------------------------------------------------
> > The below commands apply to both B4860QDS and B4420QDS.
> >
> > -1. U-boot environment variable hwconfig
> > +1. U-Boot environment variable hwconfig
> >
> > The default hwconfig is:
> > hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1:
> > dr_mode=host,phy_type=ulpi
> >
> > @@ -309,7 +309,7 @@ The below commands apply to both B4860QDS and
> > B4420QDS.
> >
> > When using [DEFAULT] RCW, which including 2 * 1G SGMII on board and 2
> > * 1G SGMII on SGMII riser card.
> >
> > - Under U-boot these network interfaces are recognized as:
> >
> > + Under U-Boot these network interfaces are recognized as:
> > FM1 at DTSEC3, FM1 at DTSEC4, FM1 at DTSEC5 and FM1 at DTSEC6.
> >
> > On Linux the interfaces are renamed as:
> > @@ -322,7 +322,7 @@ The below commands apply to both B4860QDS and
> > B4420QDS.
> >
> > Serdes protocosl tested:
> > 0x18, 0x9e (serdes1, serdes2)
> >
> > - Under U-boot these network interfaces are recognized as:
> >
> > + Under U-Boot these network interfaces are recognized as:
> > FM1 at DTSEC3, FM1 at DTSEC4 and e1000#0.
> >
> > On Linux the interfaces are renamed as:
> > @@ -355,7 +355,7 @@ SPL has following features:
> > -----------------------------------------------
> > STACK | 0xFFFD8000 (22KB) |
> > -----------------------------------------------
> >
> > - U-boot SPL | 0xFFFD8000 (160KB) |
> > + U-Boot SPL | 0xFFFD8000 (160KB) |
> >
> > -----------------------------------------------
> >
> > NAND Flash memory Map on B4860 and B4420QDS
> >
> > diff --git a/doc/README.clang b/doc/README.clang
> > index fe36909..04c2f4f 100644
> > --- a/doc/README.clang
> > +++ b/doc/README.clang
> > @@ -1,4 +1,4 @@
> > -The biggest problem when trying to compile U-boot with clang is that
> > +The biggest problem when trying to compile U-Boot with clang is that
> >
> > almost all archs rely on storing gd in a global register and clang user
> > manual states: "clang does not support global register variables; this
> > is unlikely to be implemented soon because it requires additional LLVM
> >
> > diff --git a/doc/README.fec_mxc b/doc/README.fec_mxc
> > index 30e05da..ed7e47d 100644
> > --- a/doc/README.fec_mxc
> > +++ b/doc/README.fec_mxc
> > @@ -1,4 +1,4 @@
> > -U-boot config options used in fec_mxc.c
> > +U-Boot config options used in fec_mxc.c
> >
> > CONFIG_FEC_MXC
> >
> > Selects fec_mxc.c to be compiled into u-boot. Can read out the
> >
> > diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr
> > index 1243a12..2683daf 100644
> > --- a/doc/README.fsl-ddr
> > +++ b/doc/README.fsl-ddr
> > @@ -125,7 +125,7 @@ hwconfig=fsl_ddr:ecc=off
> >
> > Memory testing options for mpc85xx
> > ==================================
> >
> > -1. Memory test can be done once U-boot prompt comes up using mtest, or
> > +1. Memory test can be done once U-Boot prompt comes up using mtest, or
> >
> > 2. Memory test can be done with Power-On-Self-Test function, activated
> > at
> >
> > compile time.
> >
> > @@ -267,7 +267,7 @@ For DDR parameter tuning up and debugging, the
> > interactive DDR debugger can
> >
> > be activated by setting the environment variable "ddr_interactive" to
> > any value. (The value of ddr_interactive may have a meaning in the
> > future, but, for now, the presence of the variable will cause the
> > debugger to run.) Once
> >
> > -activated, U-boot will show the prompt "FSL DDR>" before enabling the
> > DDR +activated, U-Boot will show the prompt "FSL DDR>" before enabling
> > the DDR
> >
> > controller. The available commands are printed by typing "help".
> >
> > Another way to enter the interactive DDR debugger without setting the
> >
> > @@ -341,7 +341,7 @@ help
> >
> > no argument - print a list of all commands
> >
> > go
> >
> > - no argument - program memory controller(s) and continue with
> > U-boot + no argument - program memory controller(s) and
> > continue with U-Boot
> >
> > Examples of debugging flow
> >
> > diff --git a/doc/README.imx6 b/doc/README.imx6
> > index e26ab71..75576a4 100644
> > --- a/doc/README.imx6
> > +++ b/doc/README.imx6
> >
> > @@ -34,7 +34,7 @@ As the fuses are arranged in banks of 8 words:
> > bank = 4
> > word = 2
> >
> > -And the U-boot command would be:
> >
> > +And the U-Boot command would be:
> > => fuse read 4 2
> >
> > Reading bank 4:
> > @@ -55,7 +55,7 @@ As the fuses are arranged in banks of 8 words:
> > bank = 4
> > word = 3
> >
> > -And the U-boot command would be:
> >
> > +And the U-Boot command would be:
> > => fuse read 4 3
> >
> > Reading bank 4:
> > diff --git a/doc/README.m68k b/doc/README.m68k
> > index c85febc..1166734 100644
> > --- a/doc/README.m68k
> > +++ b/doc/README.m68k
> > @@ -71,7 +71,7 @@ must be configured for a pre-loader (see 4.1)
> >
> > For the preloader, please see
> > http://mailman.uclinux.org/pipermail/uclinux-dev/2003-December/023384.ht
> > ml
> >
> > -U-boot is configured to run at 0x20000 at default. This can be
> > configured by +U-Boot is configured to run at 0x20000 at default. This
> > can be configured by
> >
> > change CONFIG_SYS_TEXT_BASE in board/m5282evb/config.mk and
> > CONFIG_SYS_MONITOR_BASE in include/configs/M5282EVB.h.
> >
> > diff --git a/doc/README.malta b/doc/README.malta
> > index c8db8a0..8614696 100644
> > --- a/doc/README.malta
> > +++ b/doc/README.malta
> >
> > @@ -13,4 +13,4 @@ How to flash using a MIPS Navigator Probe:
> > reset
> > flash-boot /path/to/u-boot/u-boot.bin
> >
> > - - You should now be able to reboot your Malta to a U-boot shell.
> > + - You should now be able to reboot your Malta to a U-Boot shell.
> > diff --git a/doc/README.menu b/doc/README.menu
> > index ad520ab..cf14231 100644
> > --- a/doc/README.menu
> > +++ b/doc/README.menu
> > @@ -4,7 +4,7 @@
> >
> > * SPDX-License-Identifier: GPL-2.0+
> > */
> >
> > -U-boot provides a set of interfaces for creating and using simple, text
> > +U-Boot provides a set of interfaces for creating and using simple, text
> >
> > based menus. Menus are displayed as lists of labeled entries on the
> > console, and an entry can be selected by entering its label.
> >
> > diff --git a/doc/README.mpc83xxads b/doc/README.mpc83xxads
> > index d456103..7a8b706 100644
> > --- a/doc/README.mpc83xxads
> > +++ b/doc/README.mpc83xxads
> > @@ -80,7 +80,7 @@ Freescale MPC83xx ADS Boards
> >
> > tftp 10000 u-boot.bin
> >
> > -5.1 Reflash U-boot Image using U-boot
> > +5.1 Reflash U-Boot Image using U-Boot
> >
> > tftp 10000 u-boot.bin
> > protect off fe000000 fe09ffff
> >
> > diff --git a/doc/README.mpc85xx-spin-table
> > b/doc/README.mpc85xx-spin-table index 8da768a..72c7bd7 100644
> > --- a/doc/README.mpc85xx-spin-table
> > +++ b/doc/README.mpc85xx-spin-table
> > @@ -1,7 +1,7 @@
> >
> > Spin table in cache
> > =====================================
> > As specified by ePAPR v1.1, the spin table needs to be in cached memory.
> > After
> >
> > -DDR is initialized and U-boot relocates itself into DDR, the spin table
> > is +DDR is initialized and U-Boot relocates itself into DDR, the spin
> > table is
> >
> > accessible for core 0. It is part of release.S, within 4KB range after
> > __secondary_start_page. For other cores to use the spin table, the
> > booting
> >
> > process is described below:
> > diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
> > index 28bbcbe..8344cbc 100644
> > --- a/doc/README.mpc85xxads
> > +++ b/doc/README.mpc85xxads
> > @@ -192,7 +192,7 @@ straightforward.
> >
> > and future revisions of 8540/8560.
> >
> > -4.4 Reflash U-boot Image using U-boot
> > +4.4 Reflash U-Boot Image using U-Boot
> >
> > tftp 10000 u-boot.bin
> > protect off fff80000 ffffffff
> >
> > diff --git a/doc/README.mpc85xxcds b/doc/README.mpc85xxcds
> > index bc5db0c..5359115 100644
> > --- a/doc/README.mpc85xxcds
> > +++ b/doc/README.mpc85xxcds
> >
> > @@ -62,7 +62,7 @@ as follows:
> > cp.b fff80000 ff780000 80000
> >
> > -U-boot/kermit commands for downloading an image, then copying
> > +U-Boot/kermit commands for downloading an image, then copying
> >
> > it into the secondary bank:
> > loadb
> >
> > @@ -76,7 +76,7 @@ it into the secondary bank:
> > cp.b $loadaddr ff780000 80000
> >
> > -U-boot commands for downloading an image via tftp and flashing
> > +U-Boot commands for downloading an image via tftp and flashing
> >
> > it into the second bank:
> > tftp 10000 <u-boot.bin.image>
> >
> > diff --git a/doc/README.mxs b/doc/README.mxs
> > index ed2e568..6ea73b9 100644
> > --- a/doc/README.mxs
> > +++ b/doc/README.mxs
> > @@ -1,4 +1,4 @@
> > -Booting U-boot on a MXS processor
> > +Booting U-Boot on a MXS processor
> >
> > =================================
> >
> > This document describes the MXS U-Boot port. This document mostly covers
> > topics
> >
> > @@ -23,7 +23,7 @@ Contents
> >
> > 2) Compiling U-Boot for a MXS based board
> > 3) Installation of U-Boot for a MXS based board to SD card
> > 4) Installation of U-Boot into NAND flash on a MX28 based board
> >
> > -5) Installation of U-boot into SPI NOR flash on a MX28 based board
> > +5) Installation of U-Boot into SPI NOR flash on a MX28 based board
> >
> > 1) Prerequisites
> > ----------------
> >
> > @@ -95,19 +95,19 @@ Next, configure U-Boot for a MXS based board
> >
> > Examples:
> > -1. For building U-boot for Denx M28EVK board:
> >
> > +1. For building U-Boot for Denx M28EVK board:
> > $ make m28evk_config
> >
> > -2. For building U-boot for Freescale MX28EVK board:
> >
> > +2. For building U-Boot for Freescale MX28EVK board:
> > $ make mx28evk_config
> >
> > -3. For building U-boot for Freescale MX23EVK board:
> >
> > +3. For building U-Boot for Freescale MX23EVK board:
> > $ make mx23evk_config
> >
> > -4. For building U-boot for Olimex MX23 Olinuxino board:
> >
> > +4. For building U-Boot for Olimex MX23 Olinuxino board:
> > $ make mx23_olinuxino_config
> >
> > @@ -267,7 +267,7 @@ There are two possibilities when preparing an image
> > writable to NAND flash.
> >
> > 5) Installation of U-Boot into SPI NOR flash on a MX28 based board
> > ------------------------------------------------------------------
> >
> > -The u-boot.sb file can be directly written to SPI NOR from U-boot
> > prompt. +The u-boot.sb file can be directly written to SPI NOR from
> > U-Boot prompt.
> >
> > Load u-boot.sb into RAM, this can be done in several ways and one way is
> > to use
> >
> > tftp:
> > @@ -278,7 +278,7 @@ Probe the SPI NOR flash:
> > (SPI NOR should be succesfully detected in this step)
> >
> > -Erase the blocks where U-boot binary will be written to:
> >
> > +Erase the blocks where U-Boot binary will be written to:
> > => sf erase 0x0 0x80000
> >
> > Write u-boot.sb to SPI NOR:
> > @@ -287,4 +287,4 @@ Write u-boot.sb to SPI NOR:
> > Power off the board and set the boot mode DIP switches to boot from the
> > SPI NOR according to MX28 manual section 12.2.1 (Table 12-2)
> >
> > -Last step is to power up the board and U-boot should start from SPI NOR.
> > +Last step is to power up the board and U-Boot should start from SPI NOR.
> > diff --git a/doc/README.odroid b/doc/README.odroid
> > index 8a004ca..124303e 100644
> > --- a/doc/README.odroid
> > +++ b/doc/README.odroid
> > @@ -1,4 +1,4 @@
> > - U-boot for Odroid X2/U3/XU3
> > + U-Boot for Odroid X2/U3/XU3
> >
> > ========================
> >
> > 1. Summary
> >
> > @@ -36,7 +36,7 @@
> > https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/har
> > dkernel
> >
> > 4. Boot media layout
> > ====================
> >
> > -The table below shows SD/eMMC cards layout for U-boot.
> > +The table below shows SD/eMMC cards layout for U-Boot.
> >
> > The block offset is starting from 0 and the block size is 512B.
> >
> > -------------------------------------
> >
> > | Binary | Block offset| part type |
> >
> > @@ -44,7 +44,7 @@ The block offset is starting from 0 and the block size
> > is 512B.
> >
> > -------------------------------------
> >
> > | Bl1 | 1 | 0 | 1 (boot) |
> > | Bl2 | 31 | 30 | 1 (boot) |
> >
> > -| U-boot | 63 | 62 | 1 (boot) |
> > +| U-Boot | 63 | 62 | 1 (boot) |
> >
> > | Tzsw | 2111 | 2110 | 1 (boot) |
> > | Uboot Env | 2560 | 2560 | 0 (user) |
> >
> > -------------------------------------
> >
> > @@ -66,14 +66,14 @@ u-boot then you need to change u-boot.bin with your
> > own u-boot binary*
>
> and here?
>
> > and run the script "sd_fusing.sh" - this script is valid only for SD
> > card.
> >
> > *note:
> > -The proper binary file of current U-boot is u-boot-dtb.bin.
> > +The proper binary file of current U-Boot is u-boot-dtb.bin.
> >
> > quick steps for Linux:
> > - Download all files from the link at point 3 and extract it if needed.
> > - put any SD card into the SD reader
> > - check the device with "dmesg"
> > - run ./sd_fusing.sh /dev/sdX - where X is SD card device (but not a
> > partition)
> >
> > -Check if Hardkernel U-boot is booting, and next do the same with your
> > U-boot. +Check if Hardkernel U-Boot is booting, and next do the same
> > with your U-Boot.
> >
> > 6. Prepare the eMMC boot card
> >
> > with a eMMC card reader (boot from eMMC card slot)
> >
> > @@ -92,19 +92,19 @@ eMMC partition - its size is usually very small,
> > about 1-4 MiB.
> >
> > If you have an eMMC->microSD adapter you can prepare the card as in
> > point 5. But then the device can boot only from the SD card slot.
> >
> > -8. Prepare the boot media using Hardkernel U-boot
> > +8. Prepare the boot media using Hardkernel U-Boot
> >
> > =================================================
> >
> > -You can update the U-boot to the custom one if you have a working
> > bootloader +You can update the U-Boot to the custom one if you have a
> > working bootloader
> >
> > delivered with the board on the eMMC/SD card. Then follow the steps:
> > - install the android fastboot tool
> > - connect a micro usb cable to the board
> >
> > -- on the U-boot prompt, run command: fastboot (as a root)
> > +- on the U-Boot prompt, run command: fastboot (as a root)
> >
> > - on the host, run command: "fastboot flash bootloader u-boot-dtb.bin"
> >
> > -- the custom U-boot should start after the board resets.
> > +- the custom U-Boot should start after the board resets.
> >
> > 9. Partition layout
> > ====================
> >
> > -Default U-boot environment is setup for fixed partition layout.
> > +Default U-Boot environment is setup for fixed partition layout.
> >
> > Partition table: MSDOS. Disk layout and files as listed in the table
> > below.
> >
> > ----- ------ ------ ------ -------- ---------------------------------
> >
> > diff --git a/doc/README.pxe b/doc/README.pxe
> > index bd175eb..cc182c9 100644
> > --- a/doc/README.pxe
> > +++ b/doc/README.pxe
> > @@ -5,8 +5,8 @@
> >
> > */
> >
> > The 'pxe' commands provide a near subset of the functionality provided
> > by
> >
> > -the PXELINUX boot loader. This allows U-boot based systems to be
> > controlled -remotely using the same PXE based techniques that many non
> > U-boot based servers +the PXELINUX boot loader. This allows U-Boot based
> > systems to be controlled +remotely using the same PXE based techniques
> > that many non U-Boot based servers
> >
> > use.
> >
> > Commands
> >
> > @@ -99,7 +99,7 @@ with # are treated as comments. White space between and
> > at the beginning of
> >
> > lines is ignored.
> >
> > The size of pxe files and the number of labels is only limited by the
> > amount
> >
> > -of RAM available to U-boot. Memory for labels is dynamically allocated
> > as +of RAM available to U-Boot. Memory for labels is dynamically
> > allocated as
> >
> > they're parsed, and memory for pxe files is statically allocated, and
> > its location is given by the pxefile_addr_r environment variable. The
> > pxe code is not aware of the size of the pxefile memory and will
> > outgrow it if pxe files
> >
> > @@ -206,38 +206,38 @@ to be downloaded, and boot with the command line
> > "root=/dev/sdb1"
> >
> > Differences with PXELINUX
> > =========================
> >
> > -The biggest difference between U-boot's pxe and PXELINUX is that since
> > -U-boot's pxe support is written entirely in C, it can run on any
> > platform -with network support in U-boot. Here are some other
> > differences between -PXELINUX and U-boot's pxe support.
> > +The biggest difference between U-Boot's pxe and PXELINUX is that since
> > +U-Boot's pxe support is written entirely in C, it can run on any
> > platform +with network support in U-Boot. Here are some other
> > differences between +PXELINUX and U-Boot's pxe support.
> >
> > -- U-boot's pxe does not support the PXELINUX DHCP option codes specified
> > +- U-Boot's pxe does not support the PXELINUX DHCP option codes specified
> >
> > in RFC 5071, but could be extended to do so.
> >
> > -- when U-boot's pxe fails to boot, it will return control to U-boot,
> > - allowing another command to run, other U-boot command, instead of
> > resetting +- when U-Boot's pxe fails to boot, it will return control to
> > U-Boot, + allowing another command to run, other U-Boot command,
> > instead of resetting
> >
> > the machine like PXELINUX.
> >
> > -- U-boot's pxe doesn't rely on or provide an UNDI/PXE stack in memory,
> > it - only uses U-boot.
> > +- U-Boot's pxe doesn't rely on or provide an UNDI/PXE stack in memory,
> > it + only uses U-Boot.
> >
> > -- U-boot's pxe doesn't provide the full menu implementation that
> > PXELINUX +- U-Boot's pxe doesn't provide the full menu implementation
> > that PXELINUX
> >
> > does, only a simple text based menu using the commands described in
> > this README. With PXELINUX, it's possible to have a graphical boot
> >
> > - menu, submenus, passwords, etc. U-boot's pxe could be extended to
> > support + menu, submenus, passwords, etc. U-Boot's pxe could be
> > extended to support
> >
> > a more robust menuing system like that of PXELINUX's.
> >
> > -- U-boot's pxe expects U-boot uimg's as kernels. Anything that would
> > work - with the 'bootm' command in U-boot could work with the 'pxe
> > boot' command. +- U-Boot's pxe expects U-Boot uimg's as kernels.
> > Anything that would work + with the 'bootm' command in U-Boot could
> > work with the 'pxe boot' command.
> >
> > -- U-boot's pxe only recognizes a single file on the initrd command line.
> > It +- U-Boot's pxe only recognizes a single file on the initrd command
> > line. It
> >
> > could be extended to support multiple.
> >
> > -- in U-boot's pxe, the localboot command doesn't necessarily cause a
> > local +- in U-Boot's pxe, the localboot command doesn't necessarily
> > cause a local
> >
> > disk boot - it will do whatever is defined in the 'localcmd' env
> > variable. And since it doesn't support a full UNDI/PXE stack, the
> > type field is ignored.
> >
> > -- the interactive prompt in U-boot's pxe only allows you to choose a
> > label +- the interactive prompt in U-Boot's pxe only allows you to
> > choose a label
> >
> > from the menu. If you want to boot something not listed, you can
> > ctrl+c
> >
> > - out of 'pxe boot' and use existing U-boot commands to accomplish it.
> > + out of 'pxe boot' and use existing U-Boot commands to accomplish it.
> > diff --git a/doc/README.qemu-mips b/doc/README.qemu-mips
> > index a192752..3940fac 100644
> > --- a/doc/README.qemu-mips
> > +++ b/doc/README.qemu-mips
> > @@ -157,7 +157,7 @@ This GDB was configured as "--host=i486-linux-gnu
> > --target=mipsel-unknown-linux-
> >
> > (gdb) target remote localhost:1234
> > Remote debugging using localhost:1234
> > _start () at start.S:64
> >
> > -64 RVECENT(reset,0) /* U-boot entry point */
> > +64 RVECENT(reset,0) /* U-Boot entry point */
> >
> > Current language: auto; currently asm
> > (gdb) b board.c:289
> > Breakpoint 1 at 0xbfc00cc8: file board.c, line 289.
> >
> > diff --git a/doc/README.sata b/doc/README.sata
> > index d0ce667..b1104bb 100644
> > --- a/doc/README.sata
> > +++ b/doc/README.sata
> > @@ -1,4 +1,4 @@
> > -1. SATA usage in U-boot
> > +1. SATA usage in U-Boot
> >
> > There are two ways to operate the hard disk
> >
> > @@ -45,9 +45,9 @@ SATA device 0: Model: ST3320620AS Firm: 3.AAD Ser#:
> > 4QF01ZTN
> >
> > boot
> > => bootm 200000 1000000 2000000
> >
> > -1.3 How to load an image from an ext2 file system in U-boot?
> > +1.3 How to load an image from an ext2 file system in U-Boot?
> >
> > - U-boot doesn't support writing to an ext2 file system, so the
> > + U-Boot doesn't support writing to an ext2 file system, so the
> >
> > files must be written by other means (e.g. linux).
> >
> > => ext2ls sata 0:1 /
> >
> > diff --git a/doc/README.video b/doc/README.video
> > index 62ac17b..5c437ba 100644
> > --- a/doc/README.video
> > +++ b/doc/README.video
> >
> > @@ -32,10 +32,10 @@ The driver has been tested with the following
configurations:
> > Example: video-mode=fslfb:1280x1024-32 at 60,monitor=dvi
> >
> > -U-boot sunxi video controller driver
> > +U-Boot sunxi video controller driver
> >
> > ====================================
> >
> > -U-boot supports hdmi and lcd output on Allwinner sunxi SoCs, lcd output
> > +U-Boot supports hdmi and lcd output on Allwinner sunxi SoCs, lcd output
> >
> > requires the CONFIG_VIDEO_LCD_MODE Kconfig value to be set.
>
> > The sunxi u-boot driver supports the following video-mode options:
> and here?
>
> > diff --git a/doc/SPI/README.ti_qspi_flash b/doc/SPI/README.ti_qspi_flash
> > index 1b86d01..6457172 100644
> > --- a/doc/SPI/README.ti_qspi_flash
> > +++ b/doc/SPI/README.ti_qspi_flash
> > @@ -1,4 +1,4 @@
> > -QSPI U-boot support
> > +QSPI U-Boot support
> >
> > ------------------
> >
> > Host processor is connected to serial flash device via qpsi
> >
> > diff --git a/doc/uImage.FIT/kernel.its b/doc/uImage.FIT/kernel.its
> > index 539cdbf..e668c3f 100644
> > --- a/doc/uImage.FIT/kernel.its
> > +++ b/doc/uImage.FIT/kernel.its
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * Simple U-boot uImage source file containing a single kernel
> > + * Simple U-Boot uImage source file containing a single kernel
> >
> > */
> >
> > /dts-v1/;
> >
> > diff --git a/doc/uImage.FIT/kernel_fdt.its
> > b/doc/uImage.FIT/kernel_fdt.its index 7e940d2..7c52148 100644
> > --- a/doc/uImage.FIT/kernel_fdt.its
> > +++ b/doc/uImage.FIT/kernel_fdt.its
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * Simple U-boot uImage source file containing a single kernel and FDT
> > blob + * Simple U-Boot uImage source file containing a single kernel and
> > FDT blob
> >
> > */
> >
> > /dts-v1/;
> >
> > diff --git a/doc/uImage.FIT/multi.its b/doc/uImage.FIT/multi.its
> > index 881b749..37369ec 100644
> > --- a/doc/uImage.FIT/multi.its
> > +++ b/doc/uImage.FIT/multi.its
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot uImage source file with multiple kernels, ramdisks and FDT
> > blobs + * U-Boot uImage source file with multiple kernels, ramdisks and
> > FDT blobs
> >
> > */
> >
> > /dts-v1/;
> >
> > diff --git a/doc/uImage.FIT/source_file_format.txt
> > b/doc/uImage.FIT/source_file_format.txt index 029f481..3175c9f 100644
> > --- a/doc/uImage.FIT/source_file_format.txt
> > +++ b/doc/uImage.FIT/source_file_format.txt
> > @@ -1,4 +1,4 @@
> > -U-boot new uImage source file format (bindings definition)
> > +U-Boot new uImage source file format (bindings definition)
> >
> > ==========================================================
> >
> > Author: Marian Balakowicz <m8 at semihalf.com>
> >
> > @@ -14,7 +14,7 @@ Booting with a Flattened Device Tree is much more
> > flexible and is intended to
> >
> > replace direct passing of 'struct bd_info' which was used to boot
> > pre-FDT kernels.
> >
> > -However, U-boot needs to support both techniques to provide backward
> > +However, U-Boot needs to support both techniques to provide backward
> >
> > compatibility for platforms which are not FDT ready. Number of elements
> > playing role in the booting process has increased and now includes the
> > FDT blob. Kernel image, FDT blob and possibly ramdisk image - all must
> > be placed
> >
> > @@ -36,15 +36,15 @@ a) Implementation
> >
> > Libfdt has been selected for the new uImage format implementation as (1)
> > it provides needed functionality, (2) is actively maintained and
> > developed and
> >
> > -(3) increases code reuse as it is already part of the U-boot source
> > tree. +(3) increases code reuse as it is already part of the U-Boot
> > source tree.
> >
> > b) Terminology
> >
> > This document defines new uImage structure by providing FDT bindings for
> > new
> >
> > -uImage internals. Bindings are defined from U-boot perspective, i.e.
> > describe -final form of the uImage at the moment when it reaches U-boot.
> > User +uImage internals. Bindings are defined from U-Boot perspective,
> > i.e. describe +final form of the uImage at the moment when it reaches
> > U-Boot. User
> >
> > perspective may be simpler, as some of the properties (like timestamps
> > and
> >
> > -hashes) will need to be filled in automatically by the U-boot mkimage
> > tool. +hashes) will need to be filled in automatically by the U-Boot
> > mkimage tool.
> >
> > To avoid confusion with the kernel FDT the following naming convention
> > is
> >
> > proposed for the new uImage format related terms:
> > @@ -61,7 +61,7 @@ c) Image building procedure
> >
> > The following picture shows how the new uImage is prepared. Input
> > consists of image source file (.its) and a set of data files. Image is
> > created with the
> >
> > -help of standard U-boot mkimage tool which in turn uses dtc (device tree
> > +help of standard U-Boot mkimage tool which in turn uses dtc (device tree
> >
> > compiler) to produce image tree blob (.itb). Resulting .itb file is the
> > actual binary of a new uImage.
> >
> > diff --git a/drivers/block/mvsata_ide.c b/drivers/block/mvsata_ide.c
> > index 2c6d424..7b6a155 100644
> > --- a/drivers/block/mvsata_ide.c
> > +++ b/drivers/block/mvsata_ide.c
> > @@ -83,7 +83,7 @@ struct mvsata_port_registers {
> >
> > * Status codes to return to client callers. Currently, callers ignore
> > * exact value and only care for zero or nonzero, so no need to make
> > this * public, it is only #define'd for clarity.
> >
> > - * If/when standard negative codes are implemented in U-boot, then these
> > + * If/when standard negative codes are implemented in U-Boot, then these
> >
> > * #defines should be moved to, or replaced by ones from, the common
> > list * of status codes.
> > */
> >
> > diff --git a/drivers/ddr/marvell/axp/ddr3_hw_training.c
> > b/drivers/ddr/marvell/axp/ddr3_hw_training.c index a8c5e6a..c8d7041
> > 100644
> > --- a/drivers/ddr/marvell/axp/ddr3_hw_training.c
> > +++ b/drivers/ddr/marvell/axp/ddr3_hw_training.c
> > @@ -450,7 +450,7 @@ int ddr3_hw_training(u32 target_freq, u32 ddr_width,
> > int xor_bypass,
> >
> > ddr3_set_performance_params(&dram_info);
> >
> > if (dram_info.ecc_ena) {
> >
> > - /* Need to SCRUB the DRAM memory area to load U-boot */
> > + /* Need to SCRUB the DRAM memory area to load U-Boot */
> >
> > mv_sys_xor_finish();
> > dram_info.num_cs = 1;
> > dram_info.cs_ena = 1;
> >
> > diff --git a/drivers/gpio/db8500_gpio.c b/drivers/gpio/db8500_gpio.c
> > index d5cb383..db32db6 100644
> > --- a/drivers/gpio/db8500_gpio.c
> > +++ b/drivers/gpio/db8500_gpio.c
> > @@ -1,14 +1,14 @@
> >
> > /*
> >
> > * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel
> > code. * The purpose is that GPIO config found in kernel should work by
> > simply
> >
> > - * copy-paste it to U-boot.
> > + * copy-paste it to U-Boot.
> >
> > *
> > * Original Linux authors:
> > * Copyright (C) 2008,2009 STMicroelectronics
> > * Copyright (C) 2009 Alessandro Rubini <rubini at unipv.it>
> > * Rewritten based on work by Prafulla WADASKAR
> > <prafulla.wadaskar at st.com> *
> >
> > - * Ported to U-boot by:
> >
> > + * Ported to U-Boot by:
> > * Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT
> > stericsson.com> *
> > * This program is free software; you can redistribute it and/or modify
> >
> > diff --git a/drivers/mmc/sh_sdhi.c b/drivers/mmc/sh_sdhi.c
> > index cc62c89..30e538c 100644
> > --- a/drivers/mmc/sh_sdhi.c
> > +++ b/drivers/mmc/sh_sdhi.c
> > @@ -526,7 +526,7 @@ static int sh_sdhi_start_cmd(struct sh_sdhi_host
> > *host,
> >
> > opc = sh_sdhi_set_cmd(host, data, opc);
> >
> > /*
> >
> > - * U-boot cannot use interrupt.
> > + * U-Boot cannot use interrupt.
> >
> > * So this flag may not be clear by timing
> > */
> >
> > sh_sdhi_writew(host, SDHI_INFO1, ~INFO1_RESP_END);
> >
> > diff --git a/drivers/mtd/nand/fsl_ifc_spl.c
> > b/drivers/mtd/nand/fsl_ifc_spl.c index fccbfb5..cbeb74a 100644
> > --- a/drivers/mtd/nand/fsl_ifc_spl.c
> > +++ b/drivers/mtd/nand/fsl_ifc_spl.c
> > @@ -236,7 +236,7 @@ int nand_spl_load_image(uint32_t offs, unsigned int
> > uboot_size, void *vdst)
> >
> > /*
> >
> > * Main entrypoint for NAND Boot. It's necessary that SDRAM is already
> >
> > - * configured and available since this code loads the main U-boot image
> > + * configured and available since this code loads the main U-Boot image
> >
> > * from NAND into SDRAM and starts from there.
> > */
> >
> > void nand_boot(void)
> >
> > diff --git a/drivers/mtd/nand/lpc32xx_nand_slc.c
> > b/drivers/mtd/nand/lpc32xx_nand_slc.c index 2e5f139..4e1be36 100644
> > --- a/drivers/mtd/nand/lpc32xx_nand_slc.c
> > +++ b/drivers/mtd/nand/lpc32xx_nand_slc.c
> > @@ -516,7 +516,7 @@ static int lpc32xx_write_page_hwecc(struct mtd_info
> > *mtd,
> >
> > /*
> >
> > * LPC32xx has only one SLC NAND controller, don't utilize
> > * CONFIG_SYS_NAND_SELF_INIT to be able to reuse this function
> >
> > - * both in SPL NAND and U-boot images.
> > + * both in SPL NAND and U-Boot images.
> >
> > */
> >
> > int board_nand_init(struct nand_chip *lpc32xx_chip)
> > {
> >
> > diff --git a/drivers/mtd/nand/mxc_nand_spl.c
> > b/drivers/mtd/nand/mxc_nand_spl.c index 69b736a..6ac2c96 100644
> > --- a/drivers/mtd/nand/mxc_nand_spl.c
> > +++ b/drivers/mtd/nand/mxc_nand_spl.c
> > @@ -337,7 +337,7 @@ void nand_boot(void)
> >
> > if (!nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
> >
> > CONFIG_SYS_NAND_U_BOOT_SIZE,
> > (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) {
> >
> > - /* Copy from NAND successful, start U-boot */
> > + /* Copy from NAND successful, start U-Boot */
> >
> > uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
> > uboot();
> >
> > } else {
> >
> > diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
> > index 70fc02e..6a434d7 100644
> > --- a/drivers/net/e1000.c
> > +++ b/drivers/net/e1000.c
> > @@ -5380,7 +5380,7 @@ e1000_initialize(bd_t * bis)
> >
> > for (i = 0; (devno = pci_find_devices(e1000_supported, i)) >= 0;
> > i++) {
> >
> > /*
> >
> > * These will never get freed due to errors, this allows
> > us to
> >
> > - * perform SPI EEPROM programming from U-boot, for
> > example. + * perform SPI EEPROM programming from U-Boot,
> > for example.
> >
> > */
> >
> > struct eth_device *nic = malloc(sizeof(*nic));
> > struct e1000_hw *hw = malloc(sizeof(*hw));
> >
> > diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
> > index 4b9b372..5ff25a8 100644
> > --- a/drivers/net/fsl-mc/mc.c
> > +++ b/drivers/net/fsl-mc/mc.c
> > @@ -455,7 +455,7 @@ int mc_init(u64 mc_fw_addr, u64 mc_dpc_addr)
> >
> > /*
> >
> > * Management Complex cores should be held at reset out of POR.
> >
> > - * U-boot should be the first software to touch MC. To be safe,
> > + * U-Boot should be the first software to touch MC. To be safe,
> >
> > * we reset all cores again by setting GCR1 to 0. It doesn't do
> > * anything if they are held at reset. After we setup the
> > firmware * we kick off MC by deasserting the reset bit for core
> > 0, and
> >
> > diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
> > index c4dd01e..3526876 100644
> > --- a/drivers/net/lan91c96.c
> > +++ b/drivers/net/lan91c96.c
> > @@ -1,7 +1,7 @@
> >
> > /*----------------------------------------------------------------------
> > --
> >
> > * lan91c96.c
> > * This is a driver for SMSC's LAN91C96 single-chip Ethernet device,
> > based
> >
> > - * on the SMC91111 driver from U-boot.
> > + * on the SMC91111 driver from U-Boot.
> >
> > *
> > * (C) Copyright 2002
> > * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
> >
> > diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c
> > index 887cfd9..71d133c 100644
> > --- a/drivers/net/ne2000_base.c
> > +++ b/drivers/net/ne2000_base.c
> > @@ -650,7 +650,7 @@ dp83902a_poll(void)
> >
> > }
> >
> > -/* U-boot specific routines */
> > +/* U-Boot specific routines */
> >
> > static u8 *pbuf = NULL;
> >
> > static int pkey = -1;
> >
> > diff --git a/drivers/serial/sandbox.c b/drivers/serial/sandbox.c
> > index 45dff98..58f882b 100644
> > --- a/drivers/serial/sandbox.c
> > +++ b/drivers/serial/sandbox.c
> > @@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR;
> >
> > /*
> >
> > *
> > * serial_buf: A buffer that holds keyboard characters for the
> >
> > - * Sandbox U-boot.
> > + * Sandbox U-Boot.
> >
> > *
> > * invariants:
> > * serial_buf_write == serial_buf_read -> empty buffer
> >
> > diff --git a/drivers/serial/serial_bfin.c b/drivers/serial/serial_bfin.c
> > index 0443b84..1d5be2a 100644
> > --- a/drivers/serial/serial_bfin.c
> > +++ b/drivers/serial/serial_bfin.c
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - serial.c Blackfin Serial Driver
> > + * U-Boot - serial.c Blackfin Serial Driver
> >
> > *
> > * Copyright (c) 2005-2008 Analog Devices Inc.
> > *
> >
> > diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
> > index 99345eb..69f680c 100644
> > --- a/drivers/soc/Makefile
> > +++ b/drivers/soc/Makefile
> > @@ -1,5 +1,5 @@
> >
> > #
> >
> > -# Makefile for the U-boot SOC specific device drivers.
> > +# Makefile for the U-Boot SOC specific device drivers.
> >
> > #
> > # SPDX-License-Identifier: GPL-2.0+
> > #
> >
> > diff --git a/drivers/usb/gadget/composite.c
> > b/drivers/usb/gadget/composite.c index a13b21d..60f9272 100644
> > --- a/drivers/usb/gadget/composite.c
> > +++ b/drivers/usb/gadget/composite.c
> > @@ -2,7 +2,7 @@
> >
> > * composite.c - infrastructure for Composite USB Gadgets
> > *
> > * Copyright (C) 2006-2008 David Brownell
> >
> > - * U-boot porting: Lukasz Majewski <l.majewski at samsung.com>
> > + * U-Boot porting: Lukasz Majewski <l.majewski at samsung.com>
> >
> > *
> > * SPDX-License-Identifier: GPL-2.0+
> > */
> >
> > diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
> > index 014a679..64284b0 100644
> > --- a/drivers/usb/gadget/config.c
> > +++ b/drivers/usb/gadget/config.c
> > @@ -5,7 +5,7 @@
> >
> > *
> > * SPDX-License-Identifier: GPL-2.0+
> > *
> >
> > - * Ported to U-boot by: Thomas Smits <ts.smits at gmail.com> and
> > + * Ported to U-Boot by: Thomas Smits <ts.smits at gmail.com> and
> >
> > * Remy Bohmer <linux at bohmer.net>
> > */
> >
> > diff --git a/drivers/usb/gadget/epautoconf.c
> > b/drivers/usb/gadget/epautoconf.c index 6ddbe83..a53a6dc 100644
> > --- a/drivers/usb/gadget/epautoconf.c
> > +++ b/drivers/usb/gadget/epautoconf.c
> > @@ -7,7 +7,7 @@
> >
> > *
> > * SPDX-License-Identifier: GPL-2.0+
> > *
> >
> > - * Ported to U-boot by: Thomas Smits <ts.smits at gmail.com> and
> > + * Ported to U-Boot by: Thomas Smits <ts.smits at gmail.com> and
> >
> > * Remy Bohmer <linux at bohmer.net>
> > */
> >
> > diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
> > index cfe9a24..9b06f02 100644
> > --- a/drivers/usb/gadget/ether.c
> > +++ b/drivers/usb/gadget/ether.c
> > @@ -256,7 +256,7 @@ static inline int BITRATE(struct usb_gadget *g)
> >
> > #if defined(CONFIG_USBNET_MANUFACTURER)
> > static char *iManufacturer = CONFIG_USBNET_MANUFACTURER;
> > #else
> >
> > -static char *iManufacturer = "U-boot";
> > +static char *iManufacturer = "U-Boot";
> >
> > #endif
> >
> > /* These probably need to be configurable. */
> >
> > diff --git a/drivers/usb/gadget/gadget_chips.h
> > b/drivers/usb/gadget/gadget_chips.h index e9811c3..973cd97 100644
> > --- a/drivers/usb/gadget/gadget_chips.h
> > +++ b/drivers/usb/gadget/gadget_chips.h
> > @@ -11,7 +11,7 @@
> >
> > * Some are available on 2.4 kernels; several are available, but not
> > * yet pushed in the 2.6 mainline tree.
> > *
> >
> > - * Ported to U-boot by: Thomas Smits <ts.smits at gmail.com> and
> > + * Ported to U-Boot by: Thomas Smits <ts.smits at gmail.com> and
> >
> > * Remy Bohmer <linux at bohmer.net>
> > */
> >
> > #ifdef CONFIG_USB_GADGET_NET2280
> >
> > diff --git a/drivers/usb/gadget/usbstring.c
> > b/drivers/usb/gadget/usbstring.c index 8c3ff64..3e24fbf 100644
> > --- a/drivers/usb/gadget/usbstring.c
> > +++ b/drivers/usb/gadget/usbstring.c
> > @@ -3,7 +3,7 @@
> >
> > *
> > * SPDX-License-Identifier: LGPL-2.1+
> > *
> >
> > - * Ported to U-boot by: Thomas Smits <ts.smits at gmail.com> and
> > + * Ported to U-Boot by: Thomas Smits <ts.smits at gmail.com> and
> >
> > * Remy Bohmer <linux at bohmer.net>
> > */
> >
> > diff --git a/examples/standalone/README.smc91111_eeprom
> > b/examples/standalone/README.smc91111_eeprom index f73a8d3..0d8bc63
> > 100644
> > --- a/examples/standalone/README.smc91111_eeprom
> > +++ b/examples/standalone/README.smc91111_eeprom
> > @@ -7,14 +7,14 @@ EEPROMs.
> >
> > Contents:
> > ------------------------
> >
> > -1. Ensuring U-boot's MAC address can be set in hardware
> > +1. Ensuring U-Boot's MAC address can be set in hardware
> >
> > 2. Running the smc91111_eeprom program
> > 3. Setting MAC addresses
> > 4. Other things you can do with this
> > 5. Things to be done.
> >
> > -1. Ensuring U-boot's MAC address can be set in hardware
> > +1. Ensuring U-Boot's MAC address can be set in hardware
> >
> > ------------------------------------------------------------------------
> > --
> >
> > On the Internet - MAC addresses are very important. Short for Media
> >
> > @@ -130,14 +130,14 @@ SMC91111>
> >
> > The MAC address can be stored in four locations:
> >
> > -Boot environmental variable in Flash <- can not change, without
> >
> > - re-flashing U-boot.
> > + re-flashing U-Boot.
> >
> > U-Boot environmental variable <- can not change, without
> >
> > resetting board/U-Boot
> >
> > LAN91C111 Registers <- volatile
> > LAN91C111 EEPROM <- Non-volatile
> >
> > If you have not activated the network, and do not have a hardcoded
> >
> > -or pre-assigned MAC address in U-boot, the environmental variables
> > +or pre-assigned MAC address in U-Boot, the environmental variables
> >
> > should be blank, and allow you to set things one time.
> >
> > To set the EEPROM MAC address to 12:34:56:78:9A:BC
> >
> > diff --git a/examples/standalone/smc91111_eeprom.c
> > b/examples/standalone/smc91111_eeprom.c index afecbb1..38faded 100644
> > --- a/examples/standalone/smc91111_eeprom.c
> > +++ b/examples/standalone/smc91111_eeprom.c
> > @@ -6,7 +6,7 @@
> >
> > *
> > * Heavily borrowed from the following peoples GPL'ed software:
> > * - Wolfgang Denk, DENX Software Engineering, wd at denx.de
> >
> > - * Das U-boot
> > + * Das U-Boot
> >
> > * - Ladislav Michl ladis at linux-mips.org
> > * A rejected patch on the U-Boot mailing list
> > */
> >
> > diff --git a/examples/standalone/smc911x_eeprom.c
> > b/examples/standalone/smc911x_eeprom.c index 364ad2d..2c05ed9 100644
> > --- a/examples/standalone/smc911x_eeprom.c
> > +++ b/examples/standalone/smc911x_eeprom.c
> > @@ -9,7 +9,7 @@
> >
> > * Based on smc91111_eeprom.c which:
> > * Heavily borrowed from the following peoples GPL'ed software:
> > * - Wolfgang Denk, DENX Software Engineering, wd at denx.de
> >
> > - * Das U-boot
> > + * Das U-Boot
> >
> > * - Ladislav Michl ladis at linux-mips.org
> > * A rejected patch on the U-Boot mailing list
> > */
> >
> > diff --git a/include/asm-generic/errno.h b/include/asm-generic/errno.h
> > index 523defb..464cfb7 100644
> > --- a/include/asm-generic/errno.h
> > +++ b/include/asm-generic/errno.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - errno.h Error number defines
> > + * U-Boot - errno.h Error number defines
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/include/config_distro_defaults.h
> > b/include/config_distro_defaults.h index 9d1de55..0f85cd0 100644
> > --- a/include/config_distro_defaults.h
> > +++ b/include/config_distro_defaults.h
> > @@ -24,15 +24,15 @@
> >
> > #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
> > #if defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__)
> > #if !defined(CONFIG_BOOTP_VCI_STRING)
> >
> > -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7"
> > +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv7"
> >
> > #endif
> > #elif defined(__aarch64__)
> > #if !defined(CONFIG_BOOTP_VCI_STRING)
> >
> > -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8"
> > +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv8"
> >
> > #endif
> > #else
> > #if !defined(CONFIG_BOOTP_VCI_STRING)
> >
> > -#define CONFIG_BOOTP_VCI_STRING "U-boot.arm"
> > +#define CONFIG_BOOTP_VCI_STRING "U-Boot.arm"
> >
> > #endif
> > #endif
> > #elif defined(__i386__)
> >
> > diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
> > index 342fdfe..535dc6e 100644
> > --- a/include/configs/TQM5200.h
> > +++ b/include/configs/TQM5200.h
> > @@ -334,7 +334,7 @@
> >
> > *
> > * Please notice, that the resulting clock frequency could differ from
> > the * configured value. This is because the I2C clock is derived from
> > system
> >
> > - * clock over a frequency divider with only a few divider values. U-boot
> > + * clock over a frequency divider with only a few divider values. U-Boot
> >
> > * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However
> > the calculated * approximation allways lies below the configured
> > value, never above. */
> >
> > diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h
> > index 2499b39..f6c0147 100644
> > --- a/include/configs/adp-ag101p.h
> > +++ b/include/configs/adp-ag101p.h
> > @@ -271,7 +271,7 @@
> >
> > /*
> >
> > * Load address and memory test area should agree with
> >
> > - * arch/nds32/config.mk. Be careful not to overwrite U-boot itself.
> > + * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself.
> >
> > */
> >
> > #define CONFIG_SYS_LOAD_ADDR 0x300000
> >
> > diff --git a/include/configs/bct-brettl2.h
> > b/include/configs/bct-brettl2.h index 36637ae..658b16d 100644
> > --- a/include/configs/bct-brettl2.h
> > +++ b/include/configs/bct-brettl2.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF536 brettl2 board
> > + * U-Boot - Configuration file for BF536 brettl2 board
> >
> > */
> >
> > #ifndef __CONFIG_BCT_BRETTL2_H__
> >
> > diff --git a/include/configs/bf506f-ezkit.h
> > b/include/configs/bf506f-ezkit.h index 597f1cd..68a91a6 100644
> > --- a/include/configs/bf506f-ezkit.h
> > +++ b/include/configs/bf506f-ezkit.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF506F EZ-Kit board
> > + * U-Boot - Configuration file for BF506F EZ-Kit board
> >
> > */
> >
> > #ifndef __CONFIG_BF506F_EZKIT_H__
> >
> > diff --git a/include/configs/bf518f-ezbrd.h
> > b/include/configs/bf518f-ezbrd.h index 84bb044..9f44ebd 100644
> > --- a/include/configs/bf518f-ezbrd.h
> > +++ b/include/configs/bf518f-ezbrd.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF518F EZBrd board
> > + * U-Boot - Configuration file for BF518F EZBrd board
> >
> > */
> >
> > #ifndef __CONFIG_BF518F_EZBRD_H__
> >
> > diff --git a/include/configs/bf525-ucr2.h b/include/configs/bf525-ucr2.h
> > index d12963a..5a6067e 100644
> > --- a/include/configs/bf525-ucr2.h
> > +++ b/include/configs/bf525-ucr2.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for bf525-ucr2 board
> > + * U-Boot - Configuration file for bf525-ucr2 board
> >
> > * The board includes ADSP-BF525 rev. 0.2,
> > * 32-bit SDRAM (SAMSUNG K4S561632H-UC75),
> > * USB 2.0 High Speed OTG USB WIFI,
> >
> > diff --git a/include/configs/bf526-ezbrd.h
> > b/include/configs/bf526-ezbrd.h index 35a2228..e9d900e 100644
> > --- a/include/configs/bf526-ezbrd.h
> > +++ b/include/configs/bf526-ezbrd.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF526 EZBrd board
> > + * U-Boot - Configuration file for BF526 EZBrd board
> >
> > */
> >
> > #ifndef __CONFIG_BF526_EZBRD_H__
> >
> > diff --git a/include/configs/bf527-ad7160-eval.h
> > b/include/configs/bf527-ad7160-eval.h index 2f3dec5..dd62e7e 100644
> > --- a/include/configs/bf527-ad7160-eval.h
> > +++ b/include/configs/bf527-ad7160-eval.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF527 AD7160-EVAL board
> > + * U-Boot - Configuration file for BF527 AD7160-EVAL board
> >
> > */
> >
> > #ifndef __CONFIG_BF527_AD7160_EVAL_H__
> >
> > diff --git a/include/configs/bf527-ezkit.h
> > b/include/configs/bf527-ezkit.h index aee7761..44de44f 100644
> > --- a/include/configs/bf527-ezkit.h
> > +++ b/include/configs/bf527-ezkit.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF537 STAMP board
> > + * U-Boot - Configuration file for BF537 STAMP board
> >
> > */
> >
> > #ifndef __CONFIG_BF527_EZKIT_H__
> >
> > diff --git a/include/configs/bf527-sdp.h b/include/configs/bf527-sdp.h
> > index 51814a6..6b51201 100644
> > --- a/include/configs/bf527-sdp.h
> > +++ b/include/configs/bf527-sdp.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF527 SDP board
> > + * U-Boot - Configuration file for BF527 SDP board
> >
> > */
> >
> > #ifndef __CONFIG_BF527_SDP_H__
> >
> > diff --git a/include/configs/bf533-ezkit.h
> > b/include/configs/bf533-ezkit.h index 1b7290e..9581101 100644
> > --- a/include/configs/bf533-ezkit.h
> > +++ b/include/configs/bf533-ezkit.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF533 EZKIT board
> > + * U-Boot - Configuration file for BF533 EZKIT board
> >
> > */
> >
> > #ifndef __CONFIG_BF533_EZKIT_H__
> >
> > diff --git a/include/configs/bf533-stamp.h
> > b/include/configs/bf533-stamp.h index 4876169..c8c48ae 100644
> > --- a/include/configs/bf533-stamp.h
> > +++ b/include/configs/bf533-stamp.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF533 STAMP board
> > + * U-Boot - Configuration file for BF533 STAMP board
> >
> > */
> >
> > #ifndef __CONFIG_BF533_STAMP_H__
> >
> > diff --git a/include/configs/bf537-minotaur.h
> > b/include/configs/bf537-minotaur.h index 4fbdca7..be474ad 100644
> > --- a/include/configs/bf537-minotaur.h
> > +++ b/include/configs/bf537-minotaur.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for CSP Minotaur board
> > + * U-Boot - Configuration file for CSP Minotaur board
> >
> > *
> > * Thu Oct 25 15:30:44 CEST 2007 <hackfin at section5.ch>
> > * Minotaur config, brushed up for official uClinux dist.
> >
> > diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h
> > index 2474adb..5794f47 100644
> > --- a/include/configs/bf537-pnav.h
> > +++ b/include/configs/bf537-pnav.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF537 PNAV board
> > + * U-Boot - Configuration file for BF537 PNAV board
> >
> > */
> >
> > #ifndef __CONFIG_BF537_PNAV_H__
> >
> > diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h
> > index 89d2604..6d4a93b 100644
> > --- a/include/configs/bf537-srv1.h
> > +++ b/include/configs/bf537-srv1.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for CSP Minotaur board
> > + * U-Boot - Configuration file for CSP Minotaur board
> >
> > *
> > * Thu Oct 25 15:30:44 CEST 2007 <hackfin at section5.ch>
> > * Minotaur config, brushed up for official uClinux dist.
> >
> > diff --git a/include/configs/bf537-stamp.h
> > b/include/configs/bf537-stamp.h index f250cdb..b178713 100644
> > --- a/include/configs/bf537-stamp.h
> > +++ b/include/configs/bf537-stamp.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF537 STAMP board
> > + * U-Boot - Configuration file for BF537 STAMP board
> >
> > */
> >
> > #ifndef __CONFIG_BF537_STAMP_H__
> >
> > diff --git a/include/configs/bf538f-ezkit.h
> > b/include/configs/bf538f-ezkit.h index b1d4f26..55becdc 100644
> > --- a/include/configs/bf538f-ezkit.h
> > +++ b/include/configs/bf538f-ezkit.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF538F EZ-Kit Lite board
> > + * U-Boot - Configuration file for BF538F EZ-Kit Lite board
> >
> > */
> >
> > #ifndef __CONFIG_BF538F_EZKIT_H__
> >
> > diff --git a/include/configs/bf548-ezkit.h
> > b/include/configs/bf548-ezkit.h index 65009c6..8198cb8 100644
> > --- a/include/configs/bf548-ezkit.h
> > +++ b/include/configs/bf548-ezkit.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF548 STAMP board
> > + * U-Boot - Configuration file for BF548 STAMP board
> >
> > */
> >
> > #ifndef __CONFIG_BF548_EZKIT_H__
> >
> > diff --git a/include/configs/bf561-acvilon.h
> > b/include/configs/bf561-acvilon.h index 92251fc..31862da 100644
> > --- a/include/configs/bf561-acvilon.h
> > +++ b/include/configs/bf561-acvilon.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF561 Acvilon System On Module
> > + * U-Boot - Configuration file for BF561 Acvilon System On Module
> >
> > * For more information please go to http://www.niistt.ru/
> > */
> >
> > diff --git a/include/configs/bf561-ezkit.h
> > b/include/configs/bf561-ezkit.h index efbc6c2..1a3b33f 100644
> > --- a/include/configs/bf561-ezkit.h
> > +++ b/include/configs/bf561-ezkit.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF561 EZKIT board
> > + * U-Boot - Configuration file for BF561 EZKIT board
> >
> > */
> >
> > #ifndef __CONFIG_BF561_EZKIT_H__
> >
> > diff --git a/include/configs/bf609-ezkit.h
> > b/include/configs/bf609-ezkit.h index b5d4847..3e0bff5 100644
> > --- a/include/configs/bf609-ezkit.h
> > +++ b/include/configs/bf609-ezkit.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BF609 EZ-Kit board
> > + * U-Boot - Configuration file for BF609 EZ-Kit board
> >
> > */
> >
> > #ifndef __CONFIG_BF609_EZKIT_H__
> >
> > diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h
> > index 60650aa..b9e859c 100644
> > --- a/include/configs/blackstamp.h
> > +++ b/include/configs/blackstamp.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BlackStamp board
> > + * U-Boot - Configuration file for BlackStamp board
> >
> > * Configuration by Ben Matthews for UR LLE using bf533-stamp.h
> > * as a template
> > * See http://blackfin.uclinux.org/gf/project/blackstamp/
> >
> > diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h
> > index 16949aa..a262e79 100644
> > --- a/include/configs/blackvme.h
> > +++ b/include/configs/blackvme.h
> > @@ -1,4 +1,4 @@
> > -/* U-boot for BlackVME. (C) Wojtek Skulski 2010.
> > +/* U-Boot for BlackVME. (C) Wojtek Skulski 2010.
> >
> > * The board includes ADSP-BF561 rev. 0.5,
> > * 32-bit SDRAM (2 * MT48LC16M16A2TG or MT48LC32M16A2TG),
> > * Gigabit Ether AX88180 (ASIX) + 88E1111 rev. B2 (Marvell),
> >
> > diff --git a/include/configs/br4.h b/include/configs/br4.h
> > index 7dda472..85f31a4 100644
> > --- a/include/configs/br4.h
> > +++ b/include/configs/br4.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for BR4 Appliance
> > + * U-Boot - Configuration file for BR4 Appliance
> >
> > *
> > * based on bf537-stamp.h
> > * Copyright (c) Switchfin Org. <dpn at switchfin.org>
> >
> > diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h
> > index e9e4e14..761e2c5 100644
> > --- a/include/configs/cm-bf527.h
> > +++ b/include/configs/cm-bf527.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for CM-BF527 board
> > + * U-Boot - Configuration file for CM-BF527 board
> >
> > */
> >
> > #ifndef __CONFIG_CM_BF527_H__
> >
> > diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h
> > index a464785..d06333d 100644
> > --- a/include/configs/cm-bf533.h
> > +++ b/include/configs/cm-bf533.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for CM-BF533 board
> > + * U-Boot - Configuration file for CM-BF533 board
> >
> > */
> >
> > #ifndef __CONFIG_CM_BF533_H__
> >
> > diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h
> > index 0eebe56..746a5bd 100644
> > --- a/include/configs/cm-bf537e.h
> > +++ b/include/configs/cm-bf537e.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for CM-BF537E board
> > + * U-Boot - Configuration file for CM-BF537E board
> >
> > */
> >
> > #ifndef __CONFIG_CM_BF537E_H__
> >
> > diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h
> > index 3a2d726..71008aa 100644
> > --- a/include/configs/cm-bf537u.h
> > +++ b/include/configs/cm-bf537u.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for CM-BF537U board
> > + * U-Boot - Configuration file for CM-BF537U board
> >
> > */
> >
> > #ifndef __CONFIG_CM_BF537U_H__
> >
> > diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h
> > index cde23ad..37205a9 100644
> > --- a/include/configs/cm-bf548.h
> > +++ b/include/configs/cm-bf548.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for cm-bf548 board
> > + * U-Boot - Configuration file for cm-bf548 board
> >
> > */
> >
> > #ifndef __CONFIG_CM_BF548_H__
> >
> > diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h
> > index 9d8a2c6..284ec83 100644
> > --- a/include/configs/cm-bf561.h
> > +++ b/include/configs/cm-bf561.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for CM-BF561 board
> > + * U-Boot - Configuration file for CM-BF561 board
> >
> > */
> >
> > #ifndef __CONFIG_CM_BF561_H__
> >
> > diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
> > index 8e70d8c..67a143f 100644
> > --- a/include/configs/cobra5272.h
> > +++ b/include/configs/cobra5272.h
> > @@ -7,7 +7,7 @@
> >
> > */
> >
> > /* ---
> >
> > - * Version: U-boot 1.0.0 - initial release for Sentec COBRA5272 board
> > + * Version: U-Boot 1.0.0 - initial release for Sentec COBRA5272 board
> >
> > * Date: 2004-03-29
> > * Author: Florian Schlote
> > *
> >
> > diff --git a/include/configs/dnp5370.h b/include/configs/dnp5370.h
> > index 3b2da0d..c46e60d 100644
> > --- a/include/configs/dnp5370.h
> > +++ b/include/configs/dnp5370.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for SSV DNP5370 board
> > + * U-Boot - Configuration file for SSV DNP5370 board
> >
> > */
> >
> > #ifndef __CONFIG_DNP5370_H__
> >
> > diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h
> > index 9fce1cd..7bc58dc 100644
> > --- a/include/configs/edb93xx.h
> > +++ b/include/configs/edb93xx.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for Cirrus Logic EDB93xx boards
> > + * U-Boot - Configuration file for Cirrus Logic EDB93xx boards
> >
> > */
> >
> > #ifndef __CONFIG_H
> >
> > diff --git a/include/configs/espt.h b/include/configs/espt.h
> > index d854341..4896498 100644
> > --- a/include/configs/espt.h
> > +++ b/include/configs/espt.h
> > @@ -56,7 +56,7 @@
> >
> > #define CONFIG_SYS_MAX_FLASH_BANKS (1)
> > #define CONFIG_SYS_MAX_FLASH_SECT (150)
> >
> > -/* U-boot setting */
> > +/* U-Boot setting */
> >
> > #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024
> > * 1024) #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
> > #define CONFIG_SYS_MONITOR_LEN (128 * 1024)
> >
> > diff --git a/include/configs/exynos5-common.h
> > b/include/configs/exynos5-common.h index 9c3ea88..834a22f 100644
> > --- a/include/configs/exynos5-common.h
> > +++ b/include/configs/exynos5-common.h
> > @@ -113,7 +113,7 @@
> >
> > #define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE +
> > CONFIG_SEC_FW_SIZE) #define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET +
> > CONFIG_BL1_SIZE)
> >
> > -/* U-boot copy size from boot Media to DRAM.*/
> > +/* U-Boot copy size from boot Media to DRAM.*/
> >
> > #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
> > #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
> >
> > diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h
> > index 4757929..7cb2346 100644
> > --- a/include/configs/ibf-dsp561.h
> > +++ b/include/configs/ibf-dsp561.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for IBF-DSP561 board
> > + * U-Boot - Configuration file for IBF-DSP561 board
> >
> > */
> >
> > #ifndef __CONFIG_IBF_DSP561__H__
> >
> > diff --git a/include/configs/ip04.h b/include/configs/ip04.h
> > index 0993ffa..3638648 100644
> > --- a/include/configs/ip04.h
> > +++ b/include/configs/ip04.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for IP04 board (having BF532 processor)
> > + * U-Boot - Configuration file for IP04 board (having BF532 processor)
> >
> > *
> > * Copyright (c) 2006 Intratrade Ltd., Ivan Danov, idanov at gmail.com
> > *
> >
> > diff --git a/include/configs/ls2080a_emu.h
> > b/include/configs/ls2080a_emu.h index 4a7ba24..534ebb6 100644
> > --- a/include/configs/ls2080a_emu.h
> > +++ b/include/configs/ls2080a_emu.h
> > @@ -11,12 +11,12 @@
> >
> > #ifdef CONFIG_LS2080A
> > #define CONFIG_IDENT_STRING " LS2080A-EMU"
> >
> > -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2080A-EMU"
> > +#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2080A-EMU"
>
> Is this safe to change? Here and other instances of VCI_STRING.
>
> > #endif
> >
> > #ifdef CONFIG_LS2085A
> > #define CONFIG_IDENT_STRING " LS2085A-EMU"
> >
> > -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-EMU"
> > +#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2085A-EMU"
> >
> > #endif
> >
> > #define CONFIG_SYS_CLK_FREQ 100000000
> >
> > diff --git a/include/configs/ls2080a_simu.h
> > b/include/configs/ls2080a_simu.h index 876ee30..2c2ce7b 100644
> > --- a/include/configs/ls2080a_simu.h
> > +++ b/include/configs/ls2080a_simu.h
> > @@ -11,12 +11,12 @@
> >
> > #ifdef CONFIG_LS2080A
> > #define CONFIG_IDENT_STRING " LS2080A-SIMU"
> >
> > -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2080A-SIMU"
> > +#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2080A-SIMU"
> >
> > #endif
> >
> > #ifdef CONFIG_LS2085A
> > #define CONFIG_IDENT_STRING " LS2085A-SIMU"
> >
> > -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-SIMU"
> > +#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2085A-SIMU"
> >
> > #endif
> >
> > #define CONFIG_SYS_CLK_FREQ 100000000
> >
> > diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
> > index 863b032..3813e25 100644
> > --- a/include/configs/mx31pdk.h
> > +++ b/include/configs/mx31pdk.h
> > @@ -165,7 +165,7 @@
> >
> > /* NAND configuration for the NAND_SPL */
> >
> > -/* Start copying real U-boot from the second page */
> > +/* Start copying real U-Boot from the second page */
> >
> > #define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
> > #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x3f800
> > /* Load U-Boot to this address */
> >
> > diff --git a/include/configs/novena.h b/include/configs/novena.h
> > index 5f0a230..1200db1 100644
> > --- a/include/configs/novena.h
> > +++ b/include/configs/novena.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * Configuration settings for the Novena U-boot.
> > + * Configuration settings for the Novena U-Boot.
> >
> > *
> > * Copyright (C) 2014 Marek Vasut <marex at denx.de>
> > *
> >
> > diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
> > index 1dd71a8..996f772 100644
> > --- a/include/configs/omap3_evm.h
> > +++ b/include/configs/omap3_evm.h
> > @@ -21,7 +21,7 @@
> >
> > #include <asm/arch/omap.h>
> >
> > /*
> > -----------------------------------------------------------------------
> > -----
> >
> > - * Supported U-boot commands
> > + * Supported U-Boot commands
> >
> > *
> > ----------------------------------------------------------------------
> > ------ */
> >
> > #define CONFIG_CMD_ASKENV
> >
> > @@ -37,7 +37,7 @@
> >
> > #define CONFIG_CMD_PING
> >
> > /*
> > -----------------------------------------------------------------------
> > -----
> >
> > - * Supported U-boot features
> > + * Supported U-Boot features
> >
> > *
> > ----------------------------------------------------------------------
> > ------ */
> >
> > #define CONFIG_SYS_LONGHELP
> >
> > diff --git a/include/configs/omap3_evm_common.h
> > b/include/configs/omap3_evm_common.h index 2004d14..0f16a6e 100644
> > --- a/include/configs/omap3_evm_common.h
> > +++ b/include/configs/omap3_evm_common.h
> > @@ -175,7 +175,7 @@
> >
> > #endif /* CONFIG_USB_OMAP3 */
> >
> > /*
> > -----------------------------------------------------------------------
> > -----
> >
> > - * U-boot features
> > + * U-Boot features
> >
> > *
> > ----------------------------------------------------------------------
> > ------ */
> >
> > #define CONFIG_SYS_MAXARGS 16 /* max args for a command
> > */
> >
> > diff --git a/include/configs/omap3_evm_quick_mmc.h
> > b/include/configs/omap3_evm_quick_mmc.h index 27cd9be..23a8a07 100644
> > --- a/include/configs/omap3_evm_quick_mmc.h
> > +++ b/include/configs/omap3_evm_quick_mmc.h
> > @@ -16,7 +16,7 @@
> >
> > #include <asm/arch/omap.h>
> >
> > /*
> > -----------------------------------------------------------------------
> > -----
> >
> > - * Supported U-boot commands
> > + * Supported U-Boot commands
> >
> > *
> > ----------------------------------------------------------------------
> > ------ */
> >
> > #define CONFIG_CMD_MMC
> >
> > @@ -30,7 +30,7 @@
> >
> > */
> >
> > /*
> > -----------------------------------------------------------------------
> > -----
> >
> > - * Supported U-boot features
> > + * Supported U-Boot features
> >
> > *
> > ----------------------------------------------------------------------
> > ------ */
> >
> > #define CONFIG_SILENT_CONSOLE
> >
> > diff --git a/include/configs/omap3_evm_quick_nand.h
> > b/include/configs/omap3_evm_quick_nand.h index 124e8c6..bb908fa 100644
> > --- a/include/configs/omap3_evm_quick_nand.h
> > +++ b/include/configs/omap3_evm_quick_nand.h
> > @@ -16,7 +16,7 @@
> >
> > #include <asm/arch/omap.h>
> >
> > /*
> > -----------------------------------------------------------------------
> > -----
> >
> > - * Supported U-boot commands
> > + * Supported U-Boot commands
> >
> > *
> > ----------------------------------------------------------------------
> > ------ */
> >
> > #define CONFIG_CMD_NAND
> >
> > @@ -29,7 +29,7 @@
> >
> > */
> >
> > /*
> > -----------------------------------------------------------------------
> > -----
> >
> > - * Supported U-boot features
> > + * Supported U-Boot features
> >
> > *
> > ----------------------------------------------------------------------
> > ------ */
> >
> > #define CONFIG_SILENT_CONSOLE
> >
> > diff --git a/include/configs/origen.h b/include/configs/origen.h
> > index ef80bf6..fa71874 100644
> > --- a/include/configs/origen.h
> > +++ b/include/configs/origen.h
> > @@ -111,7 +111,7 @@
> >
> > #define CONFIG_SYS_INIT_SP_ADDR 0x02040000
> >
> > -/* U-boot copy size from boot Media to DRAM.*/
> > +/* U-Boot copy size from boot Media to DRAM.*/
> >
> > #define COPY_BL2_SIZE 0x80000
> > #define BL2_START_OFFSET ((CONFIG_ENV_OFFSET +
> > CONFIG_ENV_SIZE)/512) #define BL2_SIZE_BLOC_COUNT
> > (COPY_BL2_SIZE/512)
> >
> > diff --git a/include/configs/pr1.h b/include/configs/pr1.h
> > index 2e5ce75..1af9ef7 100644
> > --- a/include/configs/pr1.h
> > +++ b/include/configs/pr1.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for PR1 Appliance
> > + * U-Boot - Configuration file for PR1 Appliance
> >
> > *
> > * based on bf537-stamp.h
> > * Copyright (c) Switchfin Org. <dpn at switchfin.org>
> >
> > diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h
> > index 7148f1d..0fd2caf 100644
> > --- a/include/configs/sh7763rdp.h
> > +++ b/include/configs/sh7763rdp.h
> > @@ -56,7 +56,7 @@
> >
> > #define CONFIG_SYS_MAX_FLASH_BANKS (1)
> > #define CONFIG_SYS_MAX_FLASH_SECT (520)
> >
> > -/* U-boot setting */
> > +/* U-Boot setting */
> >
> > #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024
> > * 1024) #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
> > #define CONFIG_SYS_MONITOR_LEN (128 * 1024)
> >
> > diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
> > index 2492f99..b7ac402 100644
> > --- a/include/configs/smdkv310.h
> > +++ b/include/configs/smdkv310.h
> > @@ -92,7 +92,7 @@
> >
> > #define CONFIG_SYS_INIT_SP_ADDR 0x02040000
> >
> > -/* U-boot copy size from boot Media to DRAM.*/
> > +/* U-Boot copy size from boot Media to DRAM.*/
> >
> > #define COPY_BL2_SIZE 0x80000
> > #define BL2_START_OFFSET ((CONFIG_ENV_OFFSET +
> > CONFIG_ENV_SIZE)/512) #define BL2_SIZE_BLOC_COUNT
> > (COPY_BL2_SIZE/512)
> >
> > diff --git a/include/configs/spear-common.h
> > b/include/configs/spear-common.h index d2630f4..a309448 100644
> > --- a/include/configs/spear-common.h
> > +++ b/include/configs/spear-common.h
> > @@ -12,7 +12,7 @@
> >
> > */
> >
> > -/* U-boot Load Address */
> > +/* U-Boot Load Address */
> >
> > #define CONFIG_SYS_TEXT_BASE 0x00700000
> >
> > /* Ethernet driver configuration */
> >
> > diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
> > index f421321..6db628a 100644
> > --- a/include/configs/stv0991.h
> > +++ b/include/configs/stv0991.h
> > @@ -45,7 +45,7 @@
> >
> > #define CONFIG_SYS_INIT_RAM_ADDR 0x00190000
> > #define CONFIG_SYS_INIT_SP_OFFSET \
> >
> > (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
> >
> > -/* U-boot Load Address */
> > +/* U-Boot Load Address */
> >
> > #define CONFIG_SYS_TEXT_BASE 0x00010000
> > #define CONFIG_SYS_INIT_SP_ADDR \
> >
> > (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
> >
> > diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h
> > index 1e74535..0f4d959 100644
> > --- a/include/configs/tcm-bf518.h
> > +++ b/include/configs/tcm-bf518.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for Bluetechnix TCM-BF518 board
> > + * U-Boot - Configuration file for Bluetechnix TCM-BF518 board
> >
> > */
> >
> > #ifndef __CONFIG_TCM_BF518_H__
> >
> > diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h
> > index a8947c5..fc98d24 100644
> > --- a/include/configs/tcm-bf537.h
> > +++ b/include/configs/tcm-bf537.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - Configuration file for TCM-BF537 board
> > + * U-Boot - Configuration file for TCM-BF537 board
> >
> > */
> >
> > #ifndef __CONFIG_TCM_BF537_H__
> >
> > diff --git a/include/configs/ts4800.h b/include/configs/ts4800.h
> > index 2f6c97c..50e1abb 100644
> > --- a/include/configs/ts4800.h
> > +++ b/include/configs/ts4800.h
> > @@ -20,7 +20,7 @@
> >
> > #define CONFIG_DISPLAY_BOARDINFO
> >
> > #define CONFIG_SYS_NO_FLASH /* No NOR Flash */
> >
> > -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-boot is a 2nd stage
> > bootloader */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd
> > stage bootloader */
> >
> > #define CONFIG_HW_WATCHDOG
> >
> > diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
> > index 599b269..bf89a0e 100644
> > --- a/include/configs/uniphier.h
> > +++ b/include/configs/uniphier.h
> > @@ -4,7 +4,7 @@
> >
> > * SPDX-License-Identifier: GPL-2.0+
> > */
> >
> > -/* U-boot - Common settings for UniPhier Family */
> > +/* U-Boot - Common settings for UniPhier Family */
> >
> > #ifndef __CONFIG_UNIPHIER_COMMON_H__
> > #define __CONFIG_UNIPHIER_COMMON_H__
> >
> > diff --git a/include/configs/vexpress_aemv8a.h
> > b/include/configs/vexpress_aemv8a.h index 814934a..133041b 100644
> > --- a/include/configs/vexpress_aemv8a.h
> > +++ b/include/configs/vexpress_aemv8a.h
> > @@ -24,7 +24,7 @@
> >
> > #define CONFIG_SYS_ICACHE_OFF
> >
> > #define CONFIG_IDENT_STRING " vexpress_aemv8a"
> >
> > -#define CONFIG_BOOTP_VCI_STRING
> > "U-boot.armv8.vexpress_aemv8a" +#define CONFIG_BOOTP_VCI_STRING
> > "U-Boot.armv8.vexpress_aemv8a"
> >
> > /* Link Definitions */
> > #if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
> >
> > diff --git a/include/configs/vexpress_ca15_tc2.h
> > b/include/configs/vexpress_ca15_tc2.h index 59b6310..883e58e 100644
> > --- a/include/configs/vexpress_ca15_tc2.h
> > +++ b/include/configs/vexpress_ca15_tc2.h
> > @@ -12,7 +12,7 @@
> >
> > #define __VEXPRESS_CA15X2_TC2_h
> >
> > #define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP
> >
> > -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca15x2_tc2"
> > +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv7.vexpress_ca15x2_tc2"
> >
> > #include "vexpress_common.h"
> >
> > #define CONFIG_SYSFLAGS_ADDR 0x1c010030
> >
> > diff --git a/include/configs/vexpress_ca5x2.h
> > b/include/configs/vexpress_ca5x2.h index a4ffdf5..4385027 100644
> > --- a/include/configs/vexpress_ca5x2.h
> > +++ b/include/configs/vexpress_ca5x2.h
> > @@ -12,7 +12,7 @@
> >
> > #define __VEXPRESS_CA5X2_h
> >
> > #define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP
> >
> > -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca5x2"
> > +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv7.vexpress_ca5x2"
> >
> > #include "vexpress_common.h"
> >
> > #endif /* __VEXPRESS_CA5X2_h */
> >
> > diff --git a/include/configs/vexpress_ca9x4.h
> > b/include/configs/vexpress_ca9x4.h index 71233d8..99be50a 100644
> > --- a/include/configs/vexpress_ca9x4.h
> > +++ b/include/configs/vexpress_ca9x4.h
> > @@ -12,7 +12,7 @@
> >
> > #define __VEXPRESS_CA9X4_H
> >
> > #define CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
> >
> > -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca9x4"
> > +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv7.vexpress_ca9x4"
> >
> > #include "vexpress_common.h"
> >
> > #endif /* VEXPRESS_CA9X4_H */
> >
> > diff --git a/include/linux/linkage.h b/include/linux/linkage.h
> > index efb04ee..8e2f15a 100644
> > --- a/include/linux/linkage.h
> > +++ b/include/linux/linkage.h
> > @@ -1,5 +1,5 @@
> >
> > /*
> >
> > - * U-boot - linkage.h
> > + * U-Boot - linkage.h
> >
> > *
> > * Copyright (c) 2005-2007 Analog Devices Inc.
> > *
> >
> > diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
> > index c1d039c..442316b 100644
> > --- a/include/linux/usb/cdc.h
> > +++ b/include/linux/usb/cdc.h
> > @@ -5,7 +5,7 @@
> >
> > * notably ethernet adapters and various modems. It's used mostly with
> > * firmware based USB peripherals.
> > *
> >
> > - * Ported to U-boot by: Thomas Smits <ts.smits at gmail.com> and
> > + * Ported to U-Boot by: Thomas Smits <ts.smits at gmail.com> and
> >
> > * Remy Bohmer <linux at bohmer.net>
> > */
> >
> > diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
> > index 4adf35e..b824f13 100644
> > --- a/include/linux/usb/gadget.h
> > +++ b/include/linux/usb/gadget.h
> > @@ -11,7 +11,7 @@
> >
> > *
> > * This software is licensed under the GNU GPL version 2.
> > *
> >
> > - * Ported to U-boot by: Thomas Smits <ts.smits at gmail.com> and
> > + * Ported to U-Boot by: Thomas Smits <ts.smits at gmail.com> and
> >
> > * Remy Bohmer <linux at bohmer.net>
> > */
> >
> > diff --git a/lib/Kconfig b/lib/Kconfig
> > index 46d7034..c7eab46 100644
> > --- a/lib/Kconfig
> > +++ b/lib/Kconfig
> > @@ -16,7 +16,7 @@ config USE_PRIVATE_LIBGCC
> >
> > depends on HAVE_PRIVATE_LIBGCC
> > help
> >
> > This option allows you to use the built-in libgcc
> > implementation
> >
> > - of U-boot instead of the one privided by the compiler.
> > + of U-Boot instead of the one privided by the compiler.
> >
> > If unsure, say N.
> >
> > config SYS_HZ
> >
> > diff --git a/lib/zlib/inffast.c b/lib/zlib/inffast.c
> > index 0700e04..e3c7f3b 100644
> > --- a/lib/zlib/inffast.c
> > +++ b/lib/zlib/inffast.c
> > @@ -3,7 +3,7 @@
> >
> > * For conditions of distribution and use, see copyright notice in
> > zlib.h */
> >
> > -/* U-boot: we already included these
> > +/* U-Boot: we already included these
> >
> > #include "zutil.h"
> > #include "inftrees.h"
> > #include "inflate.h"
> >
> > diff --git a/lib/zlib/inftrees.c b/lib/zlib/inftrees.c
> > index 7474a52..b71b969 100644
> > --- a/lib/zlib/inftrees.c
> > +++ b/lib/zlib/inftrees.c
> > @@ -3,7 +3,7 @@
> >
> > * For conditions of distribution and use, see copyright notice in
> > zlib.h */
> >
> > -/* U-boot: we already included these
> > +/* U-Boot: we already included these
> >
> > #include "zutil.h"
> > #include "inftrees.h"
> > */
> >
> > diff --git a/lib/zlib/zutil.h b/lib/zlib/zutil.h
> > index 7e05c3b..e63bf68 100644
> > --- a/lib/zlib/zutil.h
> > +++ b/lib/zlib/zutil.h
> > @@ -95,7 +95,7 @@ extern const char * const z_errmsg[10]; /* indexed by
> > 2-zlib_error */
> >
> > /* Diagnostic functions */
> > #ifdef DEBUG
> >
> > -/* Not valid for U-boot
> > +/* Not valid for U-Boot
> >
> > # include <stdio.h> */
> >
> > extern int z_verbose;
> > extern void z_error OF((char *m));
> >
> > diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
> > index 074234f..e8e8c77 100644
> > --- a/scripts/basic/fixdep.c
> > +++ b/scripts/basic/fixdep.c
> > @@ -123,7 +123,7 @@
> >
> > char *target;
> > char *depfile;
> > char *cmdline;
> >
> > -int is_spl_build = 0; /* hack for U-boot */
> > +int is_spl_build = 0; /* hack for U-Boot */
> >
> > static void usage(void)
> > {
> >
> > @@ -459,7 +459,7 @@ int main(int argc, char *argv[])
> >
> > target = argv[2];
> > cmdline = argv[3];
> >
> > - /* hack for U-boot */
> > + /* hack for U-Boot */
> >
> > if (!strncmp(target, "spl/", 4) || !strncmp(target, "tpl/", 4))
> >
> > is_spl_build = 1;
> >
> > diff --git a/test/ums/ums_gadget_test.sh b/test/ums/ums_gadget_test.sh
> > index 9da486b..97a7566 100755
> > --- a/test/ums/ums_gadget_test.sh
> > +++ b/test/ums/ums_gadget_test.sh
> > @@ -96,7 +96,7 @@ ums_test_file () {
> >
> > }
> >
> > printf
> > "$COLOUR_GREEN=========================================================
> > ================================ $COLOUR_DEFAULT\n"
> >
> > -echo "U-boot UMS test program"
> > +echo "U-Boot UMS test program"
> >
> > if [ $EUID -ne 0 ]; then
> >
> > echo "You must be root to do this." 1>&2
> >
> > diff --git a/tools/palmtreo680/flash_u-boot.c
> > b/tools/palmtreo680/flash_u-boot.c index 3d8296f..832d3fe 100644
> > --- a/tools/palmtreo680/flash_u-boot.c
> > +++ b/tools/palmtreo680/flash_u-boot.c
> > @@ -97,7 +97,7 @@ int main(int argc, char * const argv[])
> >
> > return -errsv;
> >
> > }
> > printf("The mtd partition contains %d blocks\n", devinfo.eb_cnt);
> >
> > - printf("U-boot will occupy %d blocks\n", num_blocks);
> > + printf("U-Boot will occupy %d blocks\n", num_blocks);
> >
> > if (num_blocks > devinfo.eb_cnt) {
> >
> > fprintf(stderr, "Insufficient blocks on partition\n");
> > return -EINVAL;
> >
> > diff --git a/tools/patman/README b/tools/patman/README
> > index 5bd74c4..e36857d 100644
> > --- a/tools/patman/README
> > +++ b/tools/patman/README
> > @@ -138,7 +138,7 @@ is useful if your top commit is for setting up
> > testing.
> >
> > How to install it
> > =================
> >
> > -The most up to date version of patman can be found in the U-boot
> > sources. +The most up to date version of patman can be found in the
> > U-Boot sources.
> >
> > However to use it on other projects it may be more convenient to install
> > it as a standalone application. A distutils installer is included, this
> > can be used
> >
> > to install patman:
> > --
> > 1.8.2.1
> >
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
More information about the U-Boot
mailing list