[U-Boot] [PATCH 3/3] mips: ath79: Move SYS_SOC and SYS_VENDOR to board Kconfig

Wills Wang wills.wang at live.com
Thu Jan 28 15:43:58 CET 2016



On Thursday, January 28, 2016 09:44 PM, Marek Vasut wrote:
> On Thursday, January 28, 2016 at 02:31:11 PM, Wills Wang wrote:
>> On Thursday, January 28, 2016 07:51 AM, Marek Vasut wrote:
>>> In order to support boards with ath79 from different vendors and
>>> thus located under /board/$VENDOR/ , we need to define SYS_VENDOR
>>> and SYS_SOC in the board-level Kconfig. Move these two variables
>>> into board-level Kconfig for both ap121 and ap143 boards.
>>>
>>> Signed-off-by: Marek Vasut <marex at denx.de>
>>> Cc: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
>>> Cc: Wills Wang <wills.wang at live.com>
>>> ---
>>>
>>>    arch/mips/mach-ath79/Kconfig | 6 ------
>>>    board/ath79/ap121/Kconfig    | 6 ++++++
>>>    board/ath79/ap143/Kconfig    | 6 ++++++
>>>    3 files changed, 12 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig
>>> index 95f7de9..8f07a77 100644
>>> --- a/arch/mips/mach-ath79/Kconfig
>>> +++ b/arch/mips/mach-ath79/Kconfig
>>> @@ -1,12 +1,6 @@
>>>
>>>    menu "QCA/Athroes 7xxx/9xxx platforms"
>>>    
>>>    	depends on ARCH_ATH79
>>>
>>> -config SYS_VENDOR
>>> -	default "ath79"
>>> -
>>> -config SYS_SOC
>>> -	default "ath79"
>>> -
>>>
>>>    config SOC_AR933X
>>>    
>>>    	bool
>>>    	select SUPPORTS_BIG_ENDIAN
>>>
>>> diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
>>> index ec72914..a4e5690 100644
>>> --- a/board/ath79/ap121/Kconfig
>>> +++ b/board/ath79/ap121/Kconfig
>>> @@ -1,5 +1,11 @@
>>>
>>>    if BOARD_AP121
>>>
>>> +config SYS_VENDOR
>>> +	default "ath79"
>>> +
>>> +config SYS_SOC
>>> +	default "ath79"
>>> +
>>>
>>>    config SYS_BOARD
>>>    
>>>    	default "ap121"
>>>
>>> diff --git a/board/ath79/ap143/Kconfig b/board/ath79/ap143/Kconfig
>>> index 118b9b5..2e54fa7 100644
>>> --- a/board/ath79/ap143/Kconfig
>>> +++ b/board/ath79/ap143/Kconfig
>>> @@ -1,5 +1,11 @@
>>>
>>>    if BOARD_AP143
>>>
>>> +config SYS_VENDOR
>>> +	default "ath79"
>>> +
>>> +config SYS_SOC
>>> +	default "ath79"
>>> +
>>>
>>>    config SYS_BOARD
>>>    
>>>    	default "ap143"
>> I plan to place ap121 and ap143 into board/qca, and then
>> move these into board directory.
> That's fine, but keep this patch or something along those lines, since
> I want to create board/arduino/yun/ soon after your stuff is accepted.
>
> btw. I got both EHCI and ethernet operational, but I am still struggling
> with booting the board from the SPI NOR. I think there's something broken
> in start.S or lowlevel_init.S . Which board do you use for your development
> and testing ?
My private board was made by myself, it originate from AP121, and
it's circuit is compatible with AP121.

-- 
Best Regards
Wills



More information about the U-Boot mailing list