[U-Boot] [PATCH] [RFC] net: Add ag7xxx driver for Atheros MIPS

[Marek Vasut]

On Thursday, January 28, 2016 at 03:49:06 PM, Joe Hershberger wrote:
> Hi Marek,
> 
> On Wed, Jan 27, 2016 at 4:10 PM, Marek Vasut <marex at denx.de> wrote:
> > Add ethernet driver for the AR71xx and AR9xxx Atheros MIPS machines.
> > 
> > Signed-off-by: Marek Vasut <marex at denx.de>
> > Cc: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
> > Cc: Joe Hershberger <joe.hershberger at ni.com>
> > Cc: Wills Wang <wills.wang at live.com>
> > ---
> > 
> >  arch/mips/dts/ap121.dts    |   8 +
> >  arch/mips/dts/ar933x.dtsi  |  16 +
> >  arch/mips/mach-ath79/cpu.c |  47 +++
> >  configs/ap121_defconfig    |   1 +
> >  drivers/net/Kconfig        |   9 +
> >  drivers/net/Makefile       |   1 +
> >  drivers/net/ag7xxx.c       | 794
> >  +++++++++++++++++++++++++++++++++++++++++++++ 7 files changed, 876
> >  insertions(+)
> >  create mode 100644 drivers/net/ag7xxx.c
> > 
> > NOTE: This is RFC patch, it is by no means a standard submission, but it
> > should
> > 
> >       give you some starting point for the ethernet driver.
> > 
> > NOTE: The driver works and I can transfer data via TFTP, but this patch
> > needs
> > 
> >       splitting and cleanup. Some FIXMEs need to be sorted out of course.
> > 
> > NOTE: This is only tested on ar9331.
> 
> What is your plan for this?
> 
> Are you wanting a review to continue improvements (sounds like you
> already know of some improvements needed)?

A review (sans the few FIXME parts) would be nice. Also, the DT bindings
and config bits should be split from the patch of course during the
official submission.

> Are you transferring it to someone else to complete? If so, who?

Just wanted to get it out so others can have fun with it.

Best regards,
Marek Vasut