[U-Boot] [PATCH] imx: MX6DQ{P}/DL:SABRESD Fix bmode eMMC failure
Peng Fan
van.freenix at gmail.com
Fri Jan 29 03:39:11 CET 2016
From: Ye Li <ye.li at nxp.com>
The BOOTCFG value used by bmode for SABRESD eMMC boot are actually for SD card.
Fixed the value to correct one.
The issue was fixed in 2014.04 u-boot, but that patch seems missed during porting
to 2015.04.
Signed-off-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
---
board/freescale/mx6sabresd/mx6sabresd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index d20953d..42f89ab 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -638,7 +638,7 @@ static const struct boot_mode board_boot_modes[] = {
{"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
{"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
/* 8 bit bus width */
- {"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
+ {"emmc", MAKE_CFGVAL(0x60, 0x58, 0x00, 0x00)},
{NULL, 0},
};
#endif
--
2.6.2
More information about the U-Boot
mailing list