[U-Boot] question regarding USB gadget driver (dwc2)
Steve Rae
srae at broadcom.com
Fri Jan 29 19:19:10 CET 2016
Hi Lukasz,
On 16-01-29 08:40 AM, Lukasz Majewski wrote:
> Hi Steve,
>
>>
>>
>> On 16-01-26 05:35 PM, Marek Vasut wrote:
>>> On Wednesday, January 27, 2016 at 01:35:55 AM, Steve Rae wrote:
>>>> Hi Marek & Lukasz,
>>>>
>>>>
>>>> I have an issue running fastboot on my board (which is
>>>> USB_SPEED_HIGH):
>>>>
>>>> => fastboot0
>>>>
>>>> failed to enable in ep
>>>>
>>>> failed to enable in ep
>>>>
>>>> failed to enable in ep
>>>>
>>>> Because of this, fastboot does not even initialize properly, and I
>>>> need to "^C" to break out…
>>>>
>>>> I have traced this the following code in
>>>> "drivers/usb/gadget/dwc2_udc_otg.c":
>>>
>>> I will have to delegate this onto Lukasz, since he's the s3c gadget
>>> expert.
>>>
>>> Take a look at:
>>> [PATCH 1/2] usb: gadget: s3c_udc_otg: fixed max packet size check
>>> for ep_in in high speed
>>>
>>> Best regards,
>>> Marek Vasut
>>>
>> yes - I think that 'patchwork.ozlabs.org/patch/560029' would resolve
>> my issue
>> Thanks, Steve
>>
>
> Ok, I see the point. The above patch should not bring any regression,
> since if MPS < maxpacket(ep), then we will set the descriptor's
> wMaxPacketSize as ep->ep.maxpacket.
>
> I'm just wondering if you could share the wMaxPacketSize of your
> platform (lsusb -v on HOST).
>
> In my case it is:
> wMaxPacketSize 0x0200 1x 512 bytes
>
>
>
on host: lsusb -v
[... snip ...]
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
[... snip ...]
Thanks, Steve
More information about the U-Boot
mailing list