[U-Boot] [PATCH v2] arm: imx: Add support for GE Bx50v3 boards

Peng Fan van.freenix at gmail.com
Sat Jan 30 05:07:00 CET 2016


Hi Akshay,

On Fri, Jan 29, 2016 at 03:16:40PM -0500, Akshay Bhat wrote:
>Add support for GE B450v3, B650v3 and B850v3 boards. The boards
>are based on Advantech BA16 module which has a i.MX6D processor.
>The boards support:
> - FEC Ethernet
> - USB Ports
> - SDHC and MMC boot
> - SPI NOR
> - LVDS and HDMI display
>
>Basic information about the module:
> - Module manufacturer: Advantech
> - CPU: Freescale ARM Cortex-A9 i.MX6D
> - SPECS:
>     Up to 2GB Onboard DDR3 Memory;
>     Up to 16GB Onboard eMMC NAND Flash
>     Supports OpenGL ES 2.0 and OpenVG 1.1
>     HDMI, 24-bit LVDS
>     1x UART, 2x I2C, 8x GPIO,
>     4x Host USB 2.0 port, 1x USB OTG port,
>     1x micro SD (SDHC),1x SDIO, 1x SATA II,
>     1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2
>
>Signed-off-by: Akshay Bhat <akshay.bhat at timesys.com>


Reviewed-by: Peng Fan <peng.fan at nxp.com>

Regards,
Peng.


More information about the U-Boot mailing list