[U-Boot] [PATCH] OMAP3_LOGIC: Setup defconfig to enable SPL and NAND booting

[Adam Ford]

The defconfig patch will enable the the SPL and NAND settings.
The update to Kconfig will allow the SPL to configured in and
built.

Signed-off-by: Derald D. Woods <woods.technical at gmail.com>
Signed-off-by: Adam Ford <aford173 at gmail.com>
---
 arch/arm/cpu/armv7/omap3/Kconfig | 1 +
 configs/omap3_logic_defconfig    | 3 +++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig
index 4fa72f7..652d319 100644
--- a/arch/arm/cpu/armv7/omap3/Kconfig
+++ b/arch/arm/cpu/armv7/omap3/Kconfig
@@ -89,6 +89,7 @@ config TARGET_OMAP3_LOGIC
 	select DM
 	select DM_SERIAL
 	select DM_GPIO
+	select SUPPORT_SPL
 
 config TARGET_NOKIA_RX51
 	bool "Nokia RX51"
diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
index 0ff510e..53c6913 100644
--- a/configs/omap3_logic_defconfig
+++ b/configs/omap3_logic_defconfig
@@ -1,7 +1,10 @@
 CONFIG_ARM=y
 CONFIG_OMAP34XX=y
 CONFIG_TARGET_OMAP3_LOGIC=y
+CONFIG_SPL=y
+CONFIG_FIT=y
 CONFIG_SYS_PROMPT="OMAP Logic # "
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-- 
1.9.1