[U-Boot] [PATCH v2 08/23] tegra: lcd: Merge tegra124-lcd.c into display.c

[Simon Glass]

There isn't a lot of benefit of have two separate files. With driver model
the code needs to be in the same driver, so it's better to have it in the
same file.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v2: None

 arch/arm/include/asm/arch-tegra/dc.h  |  5 --
 drivers/video/tegra124/Makefile       |  1 -
 drivers/video/tegra124/display.c      | 81 ++++++++++++++++++++++++++++-
 drivers/video/tegra124/tegra124-lcd.c | 95 -----------------------------------
 4 files changed, 79 insertions(+), 103 deletions(-)
 delete mode 100644 drivers/video/tegra124/tegra124-lcd.c

diff --git a/arch/arm/include/asm/arch-tegra/dc.h b/arch/arm/include/asm/arch-tegra/dc.h
index 3a87f0b..3a7ee5e 100644
--- a/arch/arm/include/asm/arch-tegra/dc.h
+++ b/arch/arm/include/asm/arch-tegra/dc.h
@@ -566,9 +566,4 @@ enum {
 #define DC_N_WINDOWS			5
 #define DC_REG_SAVE_SPACE		(DC_N_WINDOWS + 5)
 
-struct display_timing;
-
-int display_init(void *lcdbase, int fb_bits_per_pixel,
-		 struct display_timing *timing);
-
 #endif /* __ASM_ARCH_TEGRA_DC_H */
diff --git a/drivers/video/tegra124/Makefile b/drivers/video/tegra124/Makefile
index 52eedb0..4287b9a 100644
--- a/drivers/video/tegra124/Makefile
+++ b/drivers/video/tegra124/Makefile
@@ -7,4 +7,3 @@
 obj-y += display.o
 obj-y += dp.o
 obj-y += sor.o
-obj-y += tegra124-lcd.o
diff --git a/drivers/video/tegra124/display.c b/drivers/video/tegra124/display.c
index 610ffa9..b4c4093 100644
--- a/drivers/video/tegra124/display.c
+++ b/drivers/video/tegra124/display.c
@@ -376,8 +376,8 @@ err:
 	return ret;
 }
 
-int display_init(void *lcdbase, int fb_bits_per_pixel,
-		 struct display_timing *timing)
+static int display_init(void *lcdbase, int fb_bits_per_pixel,
+			struct display_timing *timing)
 {
 	struct dc_ctlr *dc_ctlr;
 	const void *blob = gd->fdt_blob;
@@ -462,3 +462,80 @@ int display_init(void *lcdbase, int fb_bits_per_pixel,
 
 	return 0;
 }
+
+enum {
+	/* Maximum LCD size we support */
+	LCD_MAX_WIDTH		= 1920,
+	LCD_MAX_HEIGHT		= 1200,
+	LCD_MAX_LOG2_BPP	= 4,		/* 2^4 = 16 bpp */
+};
+
+vidinfo_t panel_info = {
+	/* Insert a value here so that we don't end up in the BSS */
+	.vl_col = -1,
+};
+
+int tegra_lcd_check_next_stage(const void *blob, int wait)
+{
+	return 0;
+}
+
+void tegra_lcd_early_init(const void *blob)
+{
+	/*
+	 * Go with the maximum size for now. We will fix this up after
+	 * relocation. These values are only used for memory alocation.
+	 */
+	panel_info.vl_col = LCD_MAX_WIDTH;
+	panel_info.vl_row = LCD_MAX_HEIGHT;
+	panel_info.vl_bpix = LCD_MAX_LOG2_BPP;
+}
+
+static int tegra124_lcd_init(void *lcdbase)
+{
+	struct display_timing timing;
+	int ret;
+
+	clock_set_up_plldp();
+	clock_start_periph_pll(PERIPH_ID_HOST1X, CLOCK_ID_PERIPH, 408000000);
+
+	clock_enable(PERIPH_ID_HOST1X);
+	clock_enable(PERIPH_ID_DISP1);
+	clock_enable(PERIPH_ID_PWM);
+	clock_enable(PERIPH_ID_DPAUX);
+	clock_enable(PERIPH_ID_SOR0);
+	udelay(2);
+
+	reset_set_enable(PERIPH_ID_HOST1X, 0);
+	reset_set_enable(PERIPH_ID_DISP1, 0);
+	reset_set_enable(PERIPH_ID_PWM, 0);
+	reset_set_enable(PERIPH_ID_DPAUX, 0);
+	reset_set_enable(PERIPH_ID_SOR0, 0);
+
+	ret = display_init(lcdbase, 1 << LCD_BPP, &timing);
+	if (ret)
+		return ret;
+
+	panel_info.vl_col = roundup(timing.hactive.typ, 16);
+	panel_info.vl_row = timing.vactive.typ;
+
+	lcd_set_flush_dcache(1);
+
+	return 0;
+}
+
+void lcd_ctrl_init(void *lcdbase)
+{
+	ulong start;
+	int ret;
+
+	start = get_timer(0);
+	ret = tegra124_lcd_init(lcdbase);
+	debug("LCD init took %lu ms\n", get_timer(start));
+	if (ret)
+		printf("%s: Error %d\n", __func__, ret);
+}
+
+void lcd_enable(void)
+{
+}
diff --git a/drivers/video/tegra124/tegra124-lcd.c b/drivers/video/tegra124/tegra124-lcd.c
deleted file mode 100644
index cfdc77f..0000000
--- a/drivers/video/tegra124/tegra124-lcd.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2014 Google Inc.
- *
- * SPDX-License-Identifier:     GPL-2.0+
- *
- */
-
-#include <common.h>
-#include <errno.h>
-#include <fdtdec.h>
-#include <lcd.h>
-#include <asm/gpio.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch/clock.h>
-#include <asm/arch-tegra/dc.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-enum {
-	/* Maximum LCD size we support */
-	LCD_MAX_WIDTH		= 1920,
-	LCD_MAX_HEIGHT		= 1200,
-	LCD_MAX_LOG2_BPP	= 4,		/* 2^4 = 16 bpp */
-};
-
-vidinfo_t panel_info = {
-	/* Insert a value here so that we don't end up in the BSS */
-	.vl_col = -1,
-};
-
-int tegra_lcd_check_next_stage(const void *blob, int wait)
-{
-	return 0;
-}
-
-void tegra_lcd_early_init(const void *blob)
-{
-	/*
-	 * Go with the maximum size for now. We will fix this up after
-	 * relocation. These values are only used for memory alocation.
-	 */
-	panel_info.vl_col = LCD_MAX_WIDTH;
-	panel_info.vl_row = LCD_MAX_HEIGHT;
-	panel_info.vl_bpix = LCD_MAX_LOG2_BPP;
-}
-
-static int tegra124_lcd_init(void *lcdbase)
-{
-	struct display_timing timing;
-	int ret;
-
-	clock_set_up_plldp();
-	clock_start_periph_pll(PERIPH_ID_HOST1X, CLOCK_ID_PERIPH, 408000000);
-
-	clock_enable(PERIPH_ID_HOST1X);
-	clock_enable(PERIPH_ID_DISP1);
-	clock_enable(PERIPH_ID_PWM);
-	clock_enable(PERIPH_ID_DPAUX);
-	clock_enable(PERIPH_ID_SOR0);
-	udelay(2);
-
-	reset_set_enable(PERIPH_ID_HOST1X, 0);
-	reset_set_enable(PERIPH_ID_DISP1, 0);
-	reset_set_enable(PERIPH_ID_PWM, 0);
-	reset_set_enable(PERIPH_ID_DPAUX, 0);
-	reset_set_enable(PERIPH_ID_SOR0, 0);
-
-	ret = display_init(lcdbase, 1 << LCD_BPP, &timing);
-	if (ret)
-		return ret;
-
-	panel_info.vl_col = roundup(timing.hactive.typ, 16);
-	panel_info.vl_row = timing.vactive.typ;
-
-	lcd_set_flush_dcache(1);
-
-	return 0;
-}
-
-void lcd_ctrl_init(void *lcdbase)
-{
-	ulong start;
-	int ret;
-
-	start = get_timer(0);
-	ret = tegra124_lcd_init(lcdbase);
-	debug("LCD init took %lu ms\n", get_timer(start));
-	if (ret)
-		printf("%s: Error %d\n", __func__, ret);
-}
-
-void lcd_enable(void)
-{
-}
-- 
2.7.0.rc3.207.g0ac5344