[U-Boot] [PATCH v2 20/23] tegra: video: Move all fdt-decoding into a single function
Simon Glass
sjg at chromium.org
Sun Jan 31 00:37:59 CET 2016
Join the two functions which decode the device tree and put them in the
ofdata_to_platdata() method.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
drivers/video/tegra.c | 264 ++++++++++++++++++++------------------------------
1 file changed, 105 insertions(+), 159 deletions(-)
diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c
index ae9edfd..ccd9c08 100644
--- a/drivers/video/tegra.c
+++ b/drivers/video/tegra.c
@@ -57,7 +57,6 @@ struct tegra_lcd_priv {
unsigned long timer_next; /* Time we can move onto next stage */
int width; /* width in pixels */
int height; /* height in pixels */
- int bpp; /* number of bits per pixel */
/*
* log2 of number of bpp, in general, unless it bpp is 24 in which
@@ -69,7 +68,6 @@ struct tegra_lcd_priv {
unsigned pixel_clock; /* Pixel clock in Hz */
uint horiz_timing[FDT_LCD_TIMING_COUNT]; /* Horizontal timing */
uint vert_timing[FDT_LCD_TIMING_COUNT]; /* Vertical timing */
- int panel_node; /* node offset of panel information */
int pwm_channel; /* PWM channel to use for backlight */
enum lcd_cache_t cache_type;
@@ -318,109 +316,6 @@ static void debug_timing(const char *name, unsigned int timing[])
}
/**
- * Decode panel information from the fdt, according to a standard binding
- *
- * @param blob fdt blob
- * @param node offset of fdt node to read from
- * @param priv structure to store fdt config into
- * @return 0 if ok, -ve on error
- */
-static int tegra_decode_panel(const void *blob, int node,
- struct tegra_lcd_priv *priv)
-{
- int front, back, ref;
-
- priv->width = fdtdec_get_int(blob, node, "xres", -1);
- priv->height = fdtdec_get_int(blob, node, "yres", -1);
- priv->pixel_clock = fdtdec_get_int(blob, node, "clock", 0);
- if (!priv->pixel_clock || priv->width == -1 || priv->height == -1) {
- debug("%s: Pixel parameters missing\n", __func__);
- return -FDT_ERR_NOTFOUND;
- }
-
- back = fdtdec_get_int(blob, node, "left-margin", -1);
- front = fdtdec_get_int(blob, node, "right-margin", -1);
- ref = fdtdec_get_int(blob, node, "hsync-len", -1);
- if ((back | front | ref) == -1) {
- debug("%s: Horizontal parameters missing\n", __func__);
- return -FDT_ERR_NOTFOUND;
- }
-
- /* Use a ref-to-sync of 1 always, and take this from the front porch */
- priv->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
- priv->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
- priv->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
- priv->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
- priv->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC];
- debug_timing("horiz", priv->horiz_timing);
-
- back = fdtdec_get_int(blob, node, "upper-margin", -1);
- front = fdtdec_get_int(blob, node, "lower-margin", -1);
- ref = fdtdec_get_int(blob, node, "vsync-len", -1);
- if ((back | front | ref) == -1) {
- debug("%s: Vertical parameters missing\n", __func__);
- return -FDT_ERR_NOTFOUND;
- }
-
- priv->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
- priv->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
- priv->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
- priv->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
- priv->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC];
- debug_timing("vert", priv->vert_timing);
-
- return 0;
-}
-
-/**
- * Decode the display controller information from the fdt.
- *
- * @param blob fdt blob
- * @param priv structure to store fdt priv into
- * @return 0 if ok, -ve on error
- */
-static int tegra_display_decode_config(const void *blob, int node,
- struct tegra_lcd_priv *priv)
-{
- int rgb;
- int bpp, bit;
-
- priv->disp = (struct disp_ctlr *)fdtdec_get_addr(blob, node, "reg");
- if (!priv->disp) {
- debug("%s: No display controller address\n", __func__);
- return -1;
- }
-
- rgb = fdt_subnode_offset(blob, node, "rgb");
-
- priv->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel");
- if (priv->panel_node < 0) {
- debug("%s: Cannot find panel information\n", __func__);
- return -1;
- }
-
- if (tegra_decode_panel(blob, priv->panel_node, priv)) {
- debug("%s: Failed to decode panel information\n", __func__);
- return -1;
- }
-
- bpp = fdtdec_get_int(blob, priv->panel_node, "nvidia,bits-per-pixel",
- -1);
- bit = ffs(bpp) - 1;
- if (bpp == (1 << bit))
- priv->log2_bpp = bit;
- else
- priv->log2_bpp = bpp;
- if (bpp == -1) {
- debug("%s: Pixel bpp parameters missing\n", __func__);
- return -FDT_ERR_NOTFOUND;
- }
- priv->bpp = bpp;
-
- return 0;
-}
-
-/**
* Register a new display based on device tree configuration.
*
* The frame buffer can be positioned by U-Boot or overriden by the fdt.
@@ -467,51 +362,6 @@ static int tegra_display_probe(const void *blob, struct tegra_lcd_priv *priv,
}
/**
- * Decode the panel information from the fdt.
- *
- * @param blob fdt blob
- * @param priv structure to store fdt config into
- * @return 0 if ok, -ve on error
- */
-static int fdt_decode_lcd(const void *blob, struct tegra_lcd_priv *priv)
-{
- int display_node;
-
- display_node = priv->panel_node;
- if (display_node < 0) {
- debug("%s: No panel configuration available\n", __func__);
- return -1;
- }
-
- priv->pwm_channel = pwm_request(blob, display_node, "nvidia,pwm");
- if (priv->pwm_channel < 0) {
- debug("%s: Unable to request PWM channel\n", __func__);
- return -1;
- }
-
- priv->cache_type = fdtdec_get_int(blob, display_node,
- "nvidia,cache-type",
- FDT_LCD_CACHE_WRITE_BACK_FLUSH);
-
- /* These GPIOs are all optional */
- gpio_request_by_name_nodev(blob, display_node,
- "nvidia,backlight-enable-gpios", 0,
- &priv->backlight_en, GPIOD_IS_OUT);
- gpio_request_by_name_nodev(blob, display_node,
- "nvidia,lvds-shutdown-gpios", 0,
- &priv->lvds_shutdown, GPIOD_IS_OUT);
- gpio_request_by_name_nodev(blob, display_node,
- "nvidia,backlight-vdd-gpios", 0,
- &priv->backlight_vdd, GPIOD_IS_OUT);
- gpio_request_by_name_nodev(blob, display_node,
- "nvidia,panel-vdd-gpios", 0,
- &priv->panel_vdd, GPIOD_IS_OUT);
-
- return fdtdec_get_int_array(blob, display_node, "nvidia,panel-timings",
- priv->panel_timings, FDT_LCD_TIMINGS);
-}
-
-/**
* Handle the next stage of device init
*/
static int handle_stage(const void *blob, struct tegra_lcd_priv *priv)
@@ -624,15 +474,6 @@ static int tegra_lcd_probe(struct udevice *dev)
const void *blob = gd->fdt_blob;
int type = DCACHE_OFF;
- if (tegra_display_decode_config(blob, dev->of_offset, priv))
- return -1;
-
- /* get panel details */
- if (fdt_decode_lcd(blob, priv)) {
- printf("No valid LCD information in device tree\n");
- return -1;
- }
-
/* Initialize the Tegra display controller */
if (tegra_display_probe(blob, priv, (void *)plat->base)) {
printf("%s: Failed to probe display driver\n", __func__);
@@ -660,6 +501,110 @@ static int tegra_lcd_probe(struct udevice *dev)
return 0;
}
+static int tegra_lcd_ofdata_to_platdata(struct udevice *dev)
+{
+ struct tegra_lcd_priv *priv = dev_get_priv(dev);
+ const void *blob = gd->fdt_blob;
+ int node = dev->of_offset;
+ int front, back, ref;
+ int panel_node;
+ int rgb;
+ int bpp, bit;
+
+ priv->disp = (struct disp_ctlr *)dev_get_addr(dev);
+ if (!priv->disp) {
+ debug("%s: No display controller address\n", __func__);
+ return -EINVAL;
+ }
+
+ rgb = fdt_subnode_offset(blob, node, "rgb");
+
+ panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel");
+ if (panel_node < 0) {
+ debug("%s: Cannot find panel information\n", __func__);
+ return -EINVAL;
+ }
+
+ priv->width = fdtdec_get_int(blob, panel_node, "xres", -1);
+ priv->height = fdtdec_get_int(blob, panel_node, "yres", -1);
+ priv->pixel_clock = fdtdec_get_int(blob, panel_node, "clock", 0);
+ if (!priv->pixel_clock || priv->width == -1 || priv->height == -1) {
+ debug("%s: Pixel parameters missing\n", __func__);
+ return -EINVAL;
+ }
+
+ back = fdtdec_get_int(blob, panel_node, "left-margin", -1);
+ front = fdtdec_get_int(blob, panel_node, "right-margin", -1);
+ ref = fdtdec_get_int(blob, panel_node, "hsync-len", -1);
+ if ((back | front | ref) == -1) {
+ debug("%s: Horizontal parameters missing\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Use a ref-to-sync of 1 always, and take this from the front porch */
+ priv->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
+ priv->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
+ priv->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
+ priv->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
+ priv->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC];
+ debug_timing("horiz", priv->horiz_timing);
+
+ back = fdtdec_get_int(blob, panel_node, "upper-margin", -1);
+ front = fdtdec_get_int(blob, panel_node, "lower-margin", -1);
+ ref = fdtdec_get_int(blob, panel_node, "vsync-len", -1);
+ if ((back | front | ref) == -1) {
+ debug("%s: Vertical parameters missing\n", __func__);
+ return -EINVAL;
+ }
+
+ priv->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1;
+ priv->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref;
+ priv->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back;
+ priv->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front -
+ priv->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC];
+ debug_timing("vert", priv->vert_timing);
+
+ bpp = fdtdec_get_int(blob, panel_node, "nvidia,bits-per-pixel", -1);
+ bit = ffs(bpp) - 1;
+ if (bpp == (1 << bit))
+ priv->log2_bpp = bit;
+ else
+ priv->log2_bpp = bpp;
+ if (bpp == -1) {
+ debug("%s: Pixel bpp parameters missing\n", __func__);
+ return -EINVAL;
+ }
+
+ priv->pwm_channel = pwm_request(blob, panel_node, "nvidia,pwm");
+ if (priv->pwm_channel < 0) {
+ debug("%s: Unable to request PWM channel\n", __func__);
+ return -EINVAL;
+ }
+
+ priv->cache_type = fdtdec_get_int(blob, panel_node, "nvidia,cache-type",
+ FDT_LCD_CACHE_WRITE_BACK_FLUSH);
+
+ /* These GPIOs are all optional */
+ gpio_request_by_name_nodev(blob, panel_node,
+ "nvidia,backlight-enable-gpios", 0,
+ &priv->backlight_en, GPIOD_IS_OUT);
+ gpio_request_by_name_nodev(blob, panel_node,
+ "nvidia,lvds-shutdown-gpios", 0,
+ &priv->lvds_shutdown, GPIOD_IS_OUT);
+ gpio_request_by_name_nodev(blob, panel_node,
+ "nvidia,backlight-vdd-gpios", 0,
+ &priv->backlight_vdd, GPIOD_IS_OUT);
+ gpio_request_by_name_nodev(blob, panel_node,
+ "nvidia,panel-vdd-gpios", 0,
+ &priv->panel_vdd, GPIOD_IS_OUT);
+
+ if (fdtdec_get_int_array(blob, panel_node, "nvidia,panel-timings",
+ priv->panel_timings, FDT_LCD_TIMINGS))
+ return -EINVAL;
+
+ return 0;
+}
+
static int tegra_lcd_bind(struct udevice *dev)
{
struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
@@ -685,5 +630,6 @@ U_BOOT_DRIVER(tegra_lcd) = {
.ops = &tegra_lcd_ops,
.bind = tegra_lcd_bind,
.probe = tegra_lcd_probe,
+ .ofdata_to_platdata = tegra_lcd_ofdata_to_platdata,
.priv_auto_alloc_size = sizeof(struct tegra_lcd_priv),
};
--
2.7.0.rc3.207.g0ac5344
More information about the U-Boot
mailing list