[U-Boot] [PATCH] net: phy: marvell: Do not reset 88e1310 after autoneg

[Michal Simek]

On 3.6.2016 15:16, Nathan Rossi wrote:
> Commit a058052c "net: phy: do not read configuration register on reset",
> changes the behaviour of the phy_reset function such that the state of
> the BMCR register is not preserved during reset.
> 
> Change the config function for the m88e1310 so that it does not do a
> reset after configuring auto-negotiation.
> 
> Signed-off-by: Nathan Rossi <nathan at nathanrossi.com>
> Cc: Joe Hershberger <joe.hershberger at ni.com>
> Cc: Michal Simek <michal.simek at xilinx.com>
> Cc: Stefan Roese <sr at denx.de>
> ---
>  drivers/net/phy/marvell.c | 5 +----
>  1 file changed, 1 insertion(+), 4 deletions(-)
> 
> diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
> index d2e68d4..58d287b 100644
> --- a/drivers/net/phy/marvell.c
> +++ b/drivers/net/phy/marvell.c
> @@ -476,10 +476,7 @@ static int m88e1310_config(struct phy_device *phydev)
>  	/* Ensure to return to page 0 */
>  	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1310_PHY_PAGE, 0x0000);
>  
> -	genphy_config_aneg(phydev);
> -	phy_reset(phydev);
> -
> -	return 0;
> +	return genphy_config_aneg(phydev);
>  }
>  
>  static struct phy_driver M88E1011S_driver = {
> 

Acked-by: Michal Simek <michal.simek at xilinx.com>

Thanks,
Michal