[U-Boot] [PATCH] pcie/layerscape: fix bug in bus number computation when setting msi-map

York Sun york.sun at nxp.com
Fri Jun 3 18:31:50 CEST 2016


On 06/03/2016 04:19 AM, Bogdan Purcareata wrote:
> Ping?

If you checked patchwork, you would see this patch is marked as "under review".
It is in my test queue and will be merged along with other patches.

York

> 
> Bogdan P.
> 
> On 17.05.2016 10:18, Bogdan Purcareata wrote:
>> When multiple PCI cards are present in an ls2080a board, the second
>> card does not get its msi-map set up properly due to a bug in computing
>> the bus number.
>>
>> The bus number returned by PCI_BDF() is not the actual PCI bus
>> number, but instead represents a global u-boot PCI bus number.  A given
>> bus number is relative to hose->first_busno, so that has to be subtracted
>> from the PCI device id.
>>
>> Signed-off-by: Bogdan Purcareata <bogdan.purcareata at nxp.com>
>> Acked-by: Stuart Yoder <stuart.yoder at nxp.com>
>> ---
>>  drivers/pci/pcie_layerscape.c | 9 ++++++---
>>  1 file changed, 6 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c
>> index 0ba960e..2e6b986 100644
>> --- a/drivers/pci/pcie_layerscape.c
>> +++ b/drivers/pci/pcie_layerscape.c
>> @@ -569,7 +569,7 @@ static void fdt_fixup_pcie(void *blob)
>>  	unsigned char header_type;
>>  	int index;
>>  	u32 streamid;
>> -	pci_dev_t dev;
>> +	pci_dev_t dev, bdf;
>>  	int bus;
>>  	unsigned short id;
>>  	struct pci_controller *hose;
>> @@ -611,12 +611,15 @@ static void fdt_fixup_pcie(void *blob)
>>  					continue;
>>  				}
>>
>> +				/* the DT fixup must be relative to the hose first_busno */
>> +				bdf = dev - PCI_BDF(hose->first_busno, 0, 0);
>> +
>>  				/* map PCI b.d.f to streamID in LUT */
>> -				ls_pcie_lut_set_mapping(pcie, index, dev >> 8,
>> +				ls_pcie_lut_set_mapping(pcie, index, bdf >> 8,
>>  							streamid);
>>
>>  				/* update msi-map in device tree */
>> -				fdt_pcie_set_msi_map_entry(blob, pcie, dev >> 8,
>> +				fdt_pcie_set_msi_map_entry(blob, pcie, bdf >> 8,
>>  							   streamid);
>>  			}
>>  		}
>>



More information about the U-Boot mailing list