[U-Boot] [PATCH] include: usb: Rename USB controller base address mapping

[Rajesh Bhagat]

Removes SoC specific defines and use generic chasis specific defines
for USB controller base address mapping. This is done to resue the same
defines for newer platforms of same chasis.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
---
 .../include/asm/arch-fsl-layerscape/immap_lsch2.h  |    6 +++---
 .../include/asm/arch-fsl-layerscape/immap_lsch3.h  |    4 ++--
 arch/arm/include/asm/arch-ls102xa/config.h         |    4 ++--
 include/linux/usb/xhci-fsl.h                       |   12 ++++++------
 4 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index 57b99d4..1d4dbee 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -31,9 +31,9 @@
 #define CONFIG_SYS_NS16550_COM2			(CONFIG_SYS_IMMR + 0x011c0600)
 #define CONFIG_SYS_NS16550_COM3			(CONFIG_SYS_IMMR + 0x011d0500)
 #define CONFIG_SYS_NS16550_COM4			(CONFIG_SYS_IMMR + 0x011d0600)
-#define CONFIG_SYS_LS1043A_XHCI_USB1_ADDR	(CONFIG_SYS_IMMR + 0x01f00000)
-#define CONFIG_SYS_LS1043A_XHCI_USB2_ADDR	(CONFIG_SYS_IMMR + 0x02000000)
-#define CONFIG_SYS_LS1043A_XHCI_USB3_ADDR	(CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_XHCI_USB1_ADDR		(CONFIG_SYS_IMMR + 0x01f00000)
+#define CONFIG_SYS_XHCI_USB2_ADDR		(CONFIG_SYS_IMMR + 0x02000000)
+#define CONFIG_SYS_XHCI_USB3_ADDR		(CONFIG_SYS_IMMR + 0x02100000)
 #define CONFIG_SYS_PCIE1_ADDR			(CONFIG_SYS_IMMR + 0x2400000)
 #define CONFIG_SYS_PCIE2_ADDR			(CONFIG_SYS_IMMR + 0x2500000)
 #define CONFIG_SYS_PCIE3_ADDR			(CONFIG_SYS_IMMR + 0x2600000)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 65b3357..2dc9e5c 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -51,8 +51,8 @@
 #define I2C3_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01020000)
 #define I2C4_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01030000)
 
-#define CONFIG_SYS_LS2080A_XHCI_USB1_ADDR	(CONFIG_SYS_IMMR + 0x02100000)
-#define CONFIG_SYS_LS2080A_XHCI_USB2_ADDR	(CONFIG_SYS_IMMR + 0x02110000)
+#define CONFIG_SYS_XHCI_USB1_ADDR		(CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_XHCI_USB2_ADDR		(CONFIG_SYS_IMMR + 0x02110000)
 
 /* TZ Address Space Controller Definitions */
 #define TZASC1_BASE			0x01100000	/* as per CCSR map. */
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index 04abec4..30561f6 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -35,8 +35,8 @@
 #define CONFIG_SYS_NS16550_COM1			(CONFIG_SYS_IMMR + 0x011c0500)
 #define CONFIG_SYS_NS16550_COM2			(CONFIG_SYS_IMMR + 0x011d0500)
 #define CONFIG_SYS_DCU_ADDR			(CONFIG_SYS_IMMR + 0x01ce0000)
-#define CONFIG_SYS_LS102XA_XHCI_USB1_ADDR	(CONFIG_SYS_IMMR + 0x02100000)
-#define CONFIG_SYS_LS102XA_USB1_ADDR \
+#define CONFIG_SYS_XHCI_USB1_ADDR		(CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_USB1_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_LS102XA_USB1_OFFSET)
 
 #define CONFIG_SYS_FSL_SEC_OFFSET		0x00700000
diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h
index c5e42e6..b504bfd 100644
--- a/include/linux/usb/xhci-fsl.h
+++ b/include/linux/usb/xhci-fsl.h
@@ -52,17 +52,17 @@ struct fsl_xhci {
 };
 
 #if defined(CONFIG_LS102XA)
-#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS102XA_XHCI_USB1_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
 #elif defined(CONFIG_LS2080A)
-#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2080A_XHCI_USB1_ADDR
-#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2080A_XHCI_USB2_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
 #elif defined(CONFIG_LS1043A)
-#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS1043A_XHCI_USB1_ADDR
-#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS1043A_XHCI_USB2_ADDR
-#define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_LS1043A_XHCI_USB3_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_XHCI_USB3_ADDR
 #endif
 
 #define FSL_USB_XHCI_ADDR	{CONFIG_SYS_FSL_XHCI_USB1_ADDR, \
-- 
1.7.7.4