[U-Boot] [PATCH 0/6] sunxi: Add NAND controller driver

[Boris Brezillon]

Hello,

This patch series is adding the normal sunxi NAND controller driver to
u-boot.

It's based on the Linux driver, with a few adaptions to make it work
in Linux.

It's based on Scott's series syncing the MTD/NAND frameworks with
Linux 4.6 [1].

Best Regards,

Boris

[1]https://patchwork.ozlabs.org/patch/627928/

Boris Brezillon (4):
  sunxi: Add missing macros to configure the NAND controller clk
  mtd: nand: Add the sunxi NAND controller driver
  mtd: nand: Add a full-id entry for the H27QCG8T2E5R‐BCF NAND
  sunxi: Enable NAND controller on the CHIP

Brian Norris (1):
  mtd: nand: add common DT init code

Maxime Ripard (1):
  sun5i: Add NAND controller to the sun5i DTSI

 arch/arm/dts/sun5i-a10s.dtsi                  |   14 +
 arch/arm/dts/sun5i-a13-olinuxino.dts          |   15 +
 arch/arm/dts/sun5i-r8-chip.dts                |   15 +
 arch/arm/dts/sun5i.dtsi                       |   49 +
 arch/arm/include/asm/arch-sunxi/clock_sun4i.h |    5 +
 board/sunxi/board.c                           |    9 +-
 drivers/mtd/nand/Kconfig                      |    8 +-
 drivers/mtd/nand/Makefile                     |    1 +
 drivers/mtd/nand/nand_base.c                  |   70 +
 drivers/mtd/nand/nand_ids.c                   |    4 +
 drivers/mtd/nand/sunxi_nand.c                 | 1845 +++++++++++++++++++++++++
 include/configs/sunxi-common.h                |    2 +
 include/fdtdec.h                              |    1 +
 include/linux/mtd/nand.h                      |    3 +
 lib/fdtdec.c                                  |    1 +
 15 files changed, 2038 insertions(+), 4 deletions(-)
 create mode 100644 drivers/mtd/nand/sunxi_nand.c

-- 
2.7.4