[U-Boot] [linux-sunxi] [PATCH 0/6] sunxi: Add NAND controller driver
Hans de Goede
hdegoede at redhat.com
Mon Jun 6 17:37:33 CEST 2016
Hi,
On 06-06-16 17:21, Boris Brezillon wrote:
> Hello,
>
> This patch series is adding the normal sunxi NAND controller driver to
> u-boot.
>
> It's based on the Linux driver, with a few adaptions to make it work
> in Linux.
>
> It's based on Scott's series syncing the MTD/NAND frameworks with
> Linux 4.6 [1].
The entire series looks good to me, execept for one small remark
to 3/6 see me reply to that patch, with that fixed this series
is:
Acked-by: Hans de Goede <hdegoede at redhat.com>
Scott, I believe it is best for this series to be merged through
your tree, can you pick it up once any remarks you may have
are dealt with ?
Regards,
Hans
>
> Best Regards,
>
> Boris
>
> [1]https://patchwork.ozlabs.org/patch/627928/
>
> Boris Brezillon (4):
> sunxi: Add missing macros to configure the NAND controller clk
> mtd: nand: Add the sunxi NAND controller driver
> mtd: nand: Add a full-id entry for the H27QCG8T2E5R‐BCF NAND
> sunxi: Enable NAND controller on the CHIP
>
> Brian Norris (1):
> mtd: nand: add common DT init code
>
> Maxime Ripard (1):
> sun5i: Add NAND controller to the sun5i DTSI
>
> arch/arm/dts/sun5i-a10s.dtsi | 14 +
> arch/arm/dts/sun5i-a13-olinuxino.dts | 15 +
> arch/arm/dts/sun5i-r8-chip.dts | 15 +
> arch/arm/dts/sun5i.dtsi | 49 +
> arch/arm/include/asm/arch-sunxi/clock_sun4i.h | 5 +
> board/sunxi/board.c | 9 +-
> drivers/mtd/nand/Kconfig | 8 +-
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/nand_base.c | 70 +
> drivers/mtd/nand/nand_ids.c | 4 +
> drivers/mtd/nand/sunxi_nand.c | 1845 +++++++++++++++++++++++++
> include/configs/sunxi-common.h | 2 +
> include/fdtdec.h | 1 +
> include/linux/mtd/nand.h | 3 +
> lib/fdtdec.c | 1 +
> 15 files changed, 2038 insertions(+), 4 deletions(-)
> create mode 100644 drivers/mtd/nand/sunxi_nand.c
>
More information about the U-Boot
mailing list