[U-Boot] [PATCH] usb: dwc2_udc_otg: support 8-bit interface

Marek Vasut marex at denx.de
Mon Jun 6 17:59:30 CEST 2016


On 06/06/2016 05:57 PM, Steve Rae wrote:
> Define CONFIG_USB_GADGET_DWC2_PHY_8_BIT to allow the
> physical interface to be 8-bit (rather than 16-bit).
> 
> Signed-off-by: Steve Rae <srae at broadcom.com>

Can this config option be picked from DT rather than hard-coded by some
new ad-hoc config option ? Also, new options should be Kconfig'd .

Thanks

> ---
> 
>  drivers/usb/gadget/dwc2_udc_otg.c | 4 ++++
>  include/configs/bcm28155_ap.h     | 1 +
>  2 files changed, 5 insertions(+)
> 
> diff --git a/drivers/usb/gadget/dwc2_udc_otg.c b/drivers/usb/gadget/dwc2_udc_otg.c
> index cb20b00..a95c8d5 100644
> --- a/drivers/usb/gadget/dwc2_udc_otg.c
> +++ b/drivers/usb/gadget/dwc2_udc_otg.c
> @@ -415,7 +415,11 @@ static void reconfig_usbd(struct dwc2_udc *dev)
>  		|0<<7		/* Ulpi DDR sel*/
>  		|0<<6		/* 0: high speed utmi+, 1: full speed serial*/
>  		|0<<4		/* 0: utmi+, 1:ulpi*/
> +#ifdef CONFIG_USB_GADGET_DWC2_PHY_8_BIT
> +		|0<<3		/* phy i/f  0:8bit, 1:16bit*/
> +#else
>  		|1<<3		/* phy i/f  0:8bit, 1:16bit*/
> +#endif
>  		|0x7<<0;	/* HS/FS Timeout**/
>  
>  	if (dev->pdata->usb_gusbcfg)
> diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
> index 889e5db..e04cfbe 100644
> --- a/include/configs/bcm28155_ap.h
> +++ b/include/configs/bcm28155_ap.h
> @@ -134,6 +134,7 @@
>  #define CONFIG_SYS_CACHELINE_SIZE	64
>  #define CONFIG_FASTBOOT_BUF_SIZE	(CONFIG_SYS_SDRAM_SIZE - SZ_1M)
>  #define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_SDRAM_BASE
> +#define CONFIG_USB_GADGET_DWC2_PHY_8_BIT
>  #define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
>  #define CONFIG_USBID_ADDR		0x34052c46
>  
> 


-- 
Best regards,
Marek Vasut


More information about the U-Boot mailing list