[U-Boot] [PATCH v3 7/7] siemens,am33x: add draco etamin board
Heiko Schocher
hs at denx.de
Tue Jun 7 08:55:45 CEST 2016
In the draco CPU board family, etamin is a new variant
with bigger flash and more RAM. Due to new flash that
uses larger pages (4K) some changes are necessary because
it impacts the MTD partition layout and the ubi mount
parameters.
Signed-off-by: Samuel Egli <samuel.egli at siemens.com>
Signed-off-by: Heiko Schocher <hs at denx.de>
---
Changes in v2: None
arch/arm/Kconfig | 5 +
board/siemens/common/board.c | 4 +
board/siemens/draco/Kconfig | 16 ++
board/siemens/draco/MAINTAINERS | 1 +
board/siemens/draco/board.c | 39 ++++-
board/siemens/draco/mux.c | 2 +-
configs/etamin_defconfig | 17 +++
include/configs/draco.h | 1 +
include/configs/etamin.h | 261 +++++++++++++++++++++++++++++++++
include/configs/pxm2.h | 1 +
include/configs/rastaban.h | 1 +
include/configs/rut.h | 1 +
include/configs/siemens-am33x-common.h | 5 +-
include/configs/thuban.h | 1 +
14 files changed, 351 insertions(+), 4 deletions(-)
create mode 100644 configs/etamin_defconfig
create mode 100644 include/configs/etamin.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 30ed279..642a5e5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -361,6 +361,11 @@ config TARGET_RASTABAN
select CPU_V7
select SUPPORT_SPL
+config TARGET_ETAMIN
+ bool "Support etamin"
+ select CPU_V7
+ select SUPPORT_SPL
+
config TARGET_PXM2
bool "Support pxm2"
select CPU_V7
diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c
index c127f6c..9cafcea 100644
--- a/board/siemens/common/board.c
+++ b/board/siemens/common/board.c
@@ -83,8 +83,12 @@ int board_init(void)
#ifdef CONFIG_FACTORYSET
factoryset_read_eeprom(CONFIG_SYS_I2C_EEPROM_ADDR);
#endif
+
gpmc_init();
+#ifdef CONFIG_NAND_CS_INIT
+ board_nand_cs_init();
+#endif
#ifdef CONFIG_VIDEO
board_video_init();
#endif
diff --git a/board/siemens/draco/Kconfig b/board/siemens/draco/Kconfig
index 819d187..a699c7d 100644
--- a/board/siemens/draco/Kconfig
+++ b/board/siemens/draco/Kconfig
@@ -45,3 +45,19 @@ config SYS_CONFIG_NAME
default "rastaban"
endif
+
+if TARGET_ETAMIN
+
+config SYS_BOARD
+ default "draco"
+
+config SYS_VENDOR
+ default "siemens"
+
+config SYS_SOC
+ default "am33xx"
+
+config SYS_CONFIG_NAME
+ default "etamin"
+
+endif
diff --git a/board/siemens/draco/MAINTAINERS b/board/siemens/draco/MAINTAINERS
index 484dd73..e9107f0 100644
--- a/board/siemens/draco/MAINTAINERS
+++ b/board/siemens/draco/MAINTAINERS
@@ -4,6 +4,7 @@ S: Maintained
F: board/siemens/draco/
F: include/configs/draco.h
F: configs/draco_defconfig
+F: configs/etamin_defconfig
F: include/configs/thuban.h
F: configs/thuban_defconfig
F: include/configs/rastaban.h
diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c
index 41bdef0..d8869a0 100644
--- a/board/siemens/draco/board.c
+++ b/board/siemens/draco/board.c
@@ -24,6 +24,7 @@
#include <asm/arch/gpio.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
#include <asm/io.h>
#include <asm/emif.h>
#include <asm/gpio.h>
@@ -33,6 +34,7 @@
#include <watchdog.h>
#include "board.h"
#include "../common/factoryset.h"
+#include <nand.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -40,6 +42,7 @@ DECLARE_GLOBAL_DATA_PTR;
static struct draco_baseboard_id __attribute__((section(".data"))) settings;
#if DDR_PLL_FREQ == 303
+#if !defined(CONFIG_TARGET_ETAMIN)
/* Default at 303MHz-i0 */
const struct ddr3_data ddr3_default = {
0x33524444, 0x56312e35, 0x0080, 0x0000, 0x003A, 0x003F, 0x009F,
@@ -48,6 +51,16 @@ const struct ddr3_data ddr3_default = {
"default name @303MHz \0",
"default marking \0",
};
+#else
+/* etamin board */
+const struct ddr3_data ddr3_default = {
+ 0x33524444, 0x56312e36, 0x0080, 0x0000, 0x003A, 0x0010, 0x009F,
+ 0x0050, 0x0888A39B, 0x266D7FDA, 0x501F86AF, 0x00100206, 0x61A44BB2,
+ 0x0000093B, 0x0000018A,
+ "test-etamin \0",
+ "generic-8Gbit \0",
+};
+#endif
#elif DDR_PLL_FREQ == 400
/* Default at 400MHz-i0 */
const struct ddr3_data ddr3_default = {
@@ -210,6 +223,7 @@ struct ctrl_ioregs draco_ddr3_ioregs = {
draco_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 =
settings.ddr3.emif_ddr_phy_ctlr_1;
draco_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config;
+ draco_ddr3_emif_reg_data.sdram_config2 = 0x08000000;
draco_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl;
draco_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0;
@@ -251,6 +265,10 @@ int board_late_init(void)
nand_curr_device = 0;
omap_nand_switch_ecc(1, ecc_type);
+#ifdef CONFIG_TARGET_ETAMIN
+ nand_curr_device = 1;
+ omap_nand_switch_ecc(1, ecc_type);
+#endif
#ifdef CONFIG_FACTORYSET
/* Set ASN in environment*/
if (factory_dat.asn[0] != 0) {
@@ -326,7 +344,7 @@ int board_eth_init(bd_t *bis)
}
static int do_switch_reset(cmd_tbl_t *cmdtp, int flag, int argc,
- char *const argv[])
+ char *const argv[])
{
/* Reset SMSC LAN9303 switch for default configuration */
gpio_request(GPIO_LAN9303_NRST, "nRST");
@@ -346,4 +364,23 @@ U_BOOT_CMD(
#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
+#ifdef CONFIG_NAND_CS_INIT
+/* GPMC definitions for second nand cs1 */
+static const u32 gpmc_nand_config[] = {
+ ETAMIN_NAND_GPMC_CONFIG1,
+ ETAMIN_NAND_GPMC_CONFIG2,
+ ETAMIN_NAND_GPMC_CONFIG3,
+ ETAMIN_NAND_GPMC_CONFIG4,
+ ETAMIN_NAND_GPMC_CONFIG5,
+ ETAMIN_NAND_GPMC_CONFIG6,
+ /*CONFIG7- computed as params */
+};
+
+static void board_nand_cs_init(void)
+{
+ enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[1],
+ 0x18000000, GPMC_SIZE_16M);
+}
+#endif
+
#include "../common/board.c"
diff --git a/board/siemens/draco/mux.c b/board/siemens/draco/mux.c
index dbcc80b..38a484e 100644
--- a/board/siemens/draco/mux.c
+++ b/board/siemens/draco/mux.c
@@ -51,6 +51,7 @@ static struct module_pin_mux nand_pin_mux[] = {
{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
+ {OFFSET(gpmc_csn1), MODE(0) | PULLUDEN | PULLUP_EN}, /* NAND_CS1 */
{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
@@ -68,7 +69,6 @@ static struct module_pin_mux gpios_pin_mux[] = {
{OFFSET(mmc0_dat1), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y3 GPIO2_28*/
{OFFSET(mmc0_dat2), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y7 GPIO2_27*/
/* Triacs initial HW Rev */
- {OFFSET(gpmc_csn1), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_30 Y0 */
{OFFSET(gpmc_be1n), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_28 Y1 */
{OFFSET(gpmc_csn2), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_31 Y2 */
{OFFSET(lcd_data15), MODE(7) | RXACTIVE | PULLUDDIS}, /* 0_11 Y3 */
diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig
new file mode 100644
index 0000000..3f21bc4
--- /dev/null
+++ b/configs/etamin_defconfig
@@ -0,0 +1,17 @@
+CONFIG_ARM=y
+CONFIG_TARGET_ETAMIN=y
+CONFIG_SPL=y
+CONFIG_SYS_PROMPT="U-Boot# "
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
+CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_OF_LIBFDT=y
diff --git a/include/configs/draco.h b/include/configs/draco.h
index 8aee25b..35642a5 100644
--- a/include/configs/draco.h
+++ b/include/configs/draco.h
@@ -73,6 +73,7 @@
/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hostname=draco\0" \
+ "ubi_off=2048\0"\
"nand_img_size=0x400000\0" \
"optargs=\0" \
"preboot=draco_led 0\0" \
diff --git a/include/configs/etamin.h b/include/configs/etamin.h
new file mode 100644
index 0000000..91d4b26
--- /dev/null
+++ b/include/configs/etamin.h
@@ -0,0 +1,261 @@
+/*
+ * (C) Copyright 2013 Siemens Schweiz AG
+ * (C) Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ * Based on:
+ * U-Boot file:/include/configs/am335x_evm.h
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ETAMIN_H
+#define __CONFIG_ETAMIN_H
+
+#include "siemens-am33x-common.h"
+/* NAND specific changes for etamin due to different page size */
+#undef CONFIG_SYS_NAND_PAGE_SIZE
+#undef CONFIG_SYS_NAND_OOBSIZE
+#undef CONFIG_SYS_NAND_BLOCK_SIZE
+#undef CONFIG_SYS_NAND_ECCPOS
+#undef CONFIG_SYS_NAND_U_BOOT_OFFS
+#undef CONFIG_SYS_ENV_SECT_SIZE
+#undef CONFIG_ENV_OFFSET
+#undef CONFIG_NAND_OMAP_ECCSCHEME
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
+
+#define CONFIG_ENV_OFFSET 0x980000
+#define CONFIG_SYS_ENV_SECT_SIZE (512 << 10) /* 512 KiB */
+#define CONFIG_SYS_NAND_PAGE_SIZE 4096
+#define CONFIG_SYS_NAND_OOBSIZE 224
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
+ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
+ 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
+ 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \
+ 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \
+ 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \
+ 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \
+ 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \
+ 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \
+ 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \
+ 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \
+ 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \
+ 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \
+ 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \
+ 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \
+ 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \
+ 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \
+ 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \
+ 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \
+ 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \
+ 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \
+ }
+
+#undef CONFIG_SYS_NAND_ECCSIZE
+#undef CONFIG_SYS_NAND_ECCBYTES
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 26
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
+
+#define CONFIG_SYS_NAND_MAX_CHIPS 1
+
+#undef CONFIG_SYS_MAX_NAND_DEVICE
+#define CONFIG_SYS_MAX_NAND_DEVICE 3
+#define CONFIG_SYS_NAND_BASE2 (0x18000000) /* physical address */
+#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \
+ CONFIG_SYS_NAND_BASE2}
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_SYS_MPUCLK 300
+#define DDR_PLL_FREQ 303
+#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
+
+/* FWD Button = 27
+ * SRV Button = 87 */
+#define BOARD_DFU_BUTTON_GPIO 27
+#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
+/* In dfu mode keep led1 on */
+#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
+ "button_dfu0=27\0" \
+ "button_dfu1=87\0" \
+ "led0=3,0,1\0" \
+ "led1=4,0,0\0" \
+ "led2=5,0,1\0" \
+ "led3=87,0,1\0" \
+ "led4=60,0,1\0" \
+ "led5=63,0,1\0"
+
+#undef CONFIG_DOS_PARTITION
+#undef CONFIG_CMD_FAT
+
+#define CONFIG_BOARD_LATE_INIT
+
+/* Physical Memory Map */
+#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
+
+/* I2C Configuration */
+#define CONFIG_SYS_I2C_SPEED 100000
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define EEPROM_ADDR_DDR3 0x90
+#define EEPROM_ADDR_CHIP 0x120
+
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300
+
+#undef CONFIG_SPL_NET_SUPPORT
+#undef CONFIG_SPL_NET_VCI_STRING
+#undef CONFIG_SPL_ETH_SUPPORT
+
+#undef CONFIG_MII
+#undef CONFIG_PHY_GIGE
+#define CONFIG_PHY_SMSC
+
+#define CONFIG_FACTORYSET
+
+/* use both define to compile a SPL compliance test */
+/*
+#define CONFIG_SPL_CMT
+#define CONFIG_SPL_CMT_DEBUG
+*/
+
+/* nedded by compliance test in read mode */
+#if defined(CONFIG_SPL_CMT)
+#define CONFIG_SYS_DCACHE_OFF
+#endif
+
+/* Watchdog */
+#define CONFIG_OMAP_WATCHDOG
+
+/* Define own nand partitions */
+#define CONFIG_ENV_OFFSET_REDUND 0xB80000
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)
+
+
+
+#define CONFIG_DFU_MTD
+#undef COMMON_ENV_DFU_ARGS
+#define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \
+ "setenv bootargs ${bootargs};" \
+ "mtdparts default;" \
+ "draco_led 1;" \
+ "dfu 0 mtd 0;" \
+ "draco_led 0;\0" \
+
+#undef DFU_ALT_INFO_NAND_V2
+#define DFU_ALT_INFO_NAND_V2 \
+ "spl mtddev;" \
+ "spl.backup1 mtddev;" \
+ "spl.backup2 mtddev;" \
+ "spl.backup3 mtddev;" \
+ "u-boot mtddev;" \
+ "u-boot.env0 mtddev;" \
+ "u-boot.env1 mtddev;" \
+ "rootfs mtddevubi" \
+
+#undef MTDIDS_NAME_STR
+#define MTDIDS_NAME_STR "omap2-nand_concat"
+#undef MTDIDS_DEFAULT
+#define MTDIDS_DEFAULT "nand2=" MTDIDS_NAME_STR
+
+#undef MTDPARTS_DEFAULT_V2
+#define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \
+ "512k(spl)," \
+ "512k(spl.backup1)," \
+ "512k(spl.backup2)," \
+ "512k(spl.backup3)," \
+ "7680k(u-boot)," \
+ "2048k(u-boot.env0)," \
+ "2048k(u-boot.env1)," \
+ "2048k(mtdoops)," \
+ "-(rootfs)"
+
+#undef MTDPARTS_DEFAULT
+#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2
+
+#undef CONFIG_ENV_SETTINGS_NAND_V2
+#define CONFIG_ENV_SETTINGS_NAND_V2 \
+ "nand_active_ubi_vol=rootfs_a\0" \
+ "rootfs_name=rootfs\0" \
+ "kernel_name=uImage\0"\
+ "nand_root_fs_type=ubifs rootwait=1\0" \
+ "nand_args=run bootargs_defaults;" \
+ "mtdparts default;" \
+ "setenv ${partitionset_active} true;" \
+ "if test -n ${A}; then " \
+ "setenv nand_active_ubi_vol ${rootfs_name}_a;" \
+ "fi;" \
+ "if test -n ${B}; then " \
+ "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
+ "fi;" \
+ "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
+ "ubi.mtd=rootfs,${ubi_off};" \
+ "setenv bootargs ${bootargs} " \
+ "root=${nand_root} noinitrd ${mtdparts} " \
+ "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
+ "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
+ "=mtdoops\0" \
+ COMMON_ENV_DFU_ARGS \
+ "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
+ COMMON_ENV_NAND_BOOT \
+ "ubi part rootfs ${ubi_off};" \
+ "ubifsmount ubi0:${nand_active_ubi_vol};" \
+ "ubifsload ${kloadaddr} boot/${kernel_name};" \
+ "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
+ "bootm ${kloadaddr} - ${loadaddr}\0" \
+ "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
+ "bootm ${kloadaddr} - ${loadaddr}\0" \
+ COMMON_ENV_NAND_CMDS
+
+#ifndef CONFIG_SPL_BUILD
+
+#define CONFIG_NAND_CS_INIT
+#define ETAMIN_NAND_GPMC_CONFIG1 0x00000800
+#define ETAMIN_NAND_GPMC_CONFIG2 0x001e1e00
+#define ETAMIN_NAND_GPMC_CONFIG3 0x001e1e00
+#define ETAMIN_NAND_GPMC_CONFIG4 0x16051807
+#define ETAMIN_NAND_GPMC_CONFIG5 0x00151e1e
+#define ETAMIN_NAND_GPMC_CONFIG6 0x16000f80
+#define CONFIG_MTD_CONCAT
+
+/* Default env settings */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hostname=etamin\0" \
+ "ubi_off=4096\0"\
+ "nand_img_size=0x400000\0" \
+ "optargs=\0" \
+ "preboot=draco_led 0\0" \
+ CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
+ CONFIG_ENV_SETTINGS_V2 \
+ CONFIG_ENV_SETTINGS_NAND_V2
+
+#ifndef CONFIG_RESTORE_FLASH
+/* set to negative value for no autoboot */
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_BOOTCOMMAND \
+"if dfubutton; then " \
+ "run dfu_start; " \
+ "reset; " \
+"fi;" \
+"run nand_boot;" \
+"run nand_boot_backup;" \
+"reset;"
+
+
+#else
+#define CONFIG_BOOTDELAY 0
+
+#define CONFIG_BOOTCOMMAND \
+ "setenv autoload no; " \
+ "dhcp; " \
+ "if tftp 80000000 debrick.scr; then " \
+ "source 80000000; " \
+ "fi"
+#endif
+#endif /* CONFIG_SPL_BUILD */
+#endif /* ! __CONFIG_ETAMIN_H */
diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h
index 7450a1a..3f5e0ea 100644
--- a/include/configs/pxm2.h
+++ b/include/configs/pxm2.h
@@ -61,6 +61,7 @@
/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hostname=pxm2\0" \
+ "ubi_off=2048\0"\
"nand_img_size=0x500000\0" \
"optargs=\0" \
"preboot=draco_led 0\0" \
diff --git a/include/configs/rastaban.h b/include/configs/rastaban.h
index 47d2379..3fd431c 100644
--- a/include/configs/rastaban.h
+++ b/include/configs/rastaban.h
@@ -76,6 +76,7 @@
/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hostname=rastaban\0" \
+ "ubi_off=2048\0"\
"nand_img_size=0x400000\0" \
"optargs=\0" \
"preboot=draco_led 0\0" \
diff --git a/include/configs/rut.h b/include/configs/rut.h
index bf2cc2f..fcca849 100644
--- a/include/configs/rut.h
+++ b/include/configs/rut.h
@@ -56,6 +56,7 @@
/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hostname=rut\0" \
+ "ubi_off=2048\0"\
"nand_img_size=0x500000\0" \
"splashpos=m,m\0" \
"optargs=fixrtc --no-log consoleblank=0 \0" \
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index ae26dad..5969541 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -159,6 +159,7 @@
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
CONFIG_SYS_NAND_PAGE_SIZE)
@@ -421,7 +422,7 @@
"setenv nand_src_addr ${nand_src_addr_B};" \
"fi;" \
"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
- "ubi.mtd=9,2048;" \
+ "ubi.mtd=9,${ubi_off};" \
"setenv bootargs ${bootargs} " \
"root=${nand_root} noinitrd ${mtdparts} " \
"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
@@ -513,7 +514,7 @@
COMMON_ENV_DFU_ARGS \
"dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
COMMON_ENV_NAND_BOOT \
- "ubi part rootfs 2048;" \
+ "ubi part rootfs ${ubi_off};" \
"ubifsmount ubi0:${nand_active_ubi_vol};" \
"ubifsload ${kloadaddr} boot/${kernel_name};" \
"ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
diff --git a/include/configs/thuban.h b/include/configs/thuban.h
index 5fed55d..5daf071 100644
--- a/include/configs/thuban.h
+++ b/include/configs/thuban.h
@@ -69,6 +69,7 @@
/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hostname=thuban\0" \
+ "ubi_off=2048\0"\
"nand_img_size=0x400000\0" \
"optargs=\0" \
"preboot=draco_led 0\0" \
--
2.5.5
More information about the U-Boot
mailing list