[U-Boot] [PATCH v5 00/10] armv8: ls2080aqds: Enable QSPI boot support

[Yuan Yao]

From: Yuan Yao <yao.yuan at nxp.com>

This patch adds QSPI boot support for LS2080AQDS board.
The QSPI boot image need to be programmed into the QSPI flash
first. Then we can switch to booting from QSPI memory space.

Yuan Yao (10):
  drivers: i2c: mxc: Add early init
  armv8: ls2080aqds: Select QSPI CLK div via SCFG
  configs: ls2080a_common: Remove duplicate NOR configs
  armv8: ls2080aqds: disable IFC NOR & QIXIS when QSPI enable
	Changed in v5.
  configs: ls2080aqds: Enable QSPI flash support
  dm: dts: ls2080aqds: Add QSPI dts node
  armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND boot
  configs: ls2080a: Increase load image len in NAND boot
  ls2080aqds_nand_defconfig: Enable QSPI & its dependence
  armv8: ls2080aqds: Enable QSPI boot support

 arch/arm/dts/fsl-ls2080a-qds.dts                   | 14 +++++++
 arch/arm/dts/fsl-ls2080a.dtsi                      | 10 +++++
 arch/arm/include/asm/arch-fsl-layerscape/cpu.h     |  4 ++
 .../include/asm/arch-fsl-layerscape/immap_lsch3.h  |  3 ++
 board/freescale/ls2080aqds/ls2080aqds.c            | 19 ++++++++++
 configs/ls2080aqds_nand_defconfig                  |  8 ++++
 configs/ls2080aqds_qspi_defconfig                  | 27 ++++++++++++++
 drivers/i2c/i2c_core.c                             |  5 +++
 drivers/i2c/mxc_i2c.c                              | 27 ++++++++++++++
 include/configs/ls2080a_common.h                   | 11 ++----
 include/configs/ls2080a_simu.h                     |  7 ++++
 include/configs/ls2080aqds.h                       | 43 +++++++++++++++++++++-
 include/i2c.h                                      |  3 ++
 13 files changed, 171 insertions(+), 10 deletions(-)
 create mode 100644 configs/ls2080aqds_qspi_defconfig

-- 
2.1.0.27.g96db324