[U-Boot] [PATCH v6 02/10] armv8: ls2080aqds: Select QSPI CLK div via SCFG

[Yuan Yao]

From: Yuan Yao <yao.yuan at nxp.com>

QSPI module output SCLK divisor value is configured through SCFG.

Signed-off-by: Yuan Yao <yao.yuan at nxp.com>
---
 arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h | 1 +
 board/freescale/ls2080aqds/ls2080aqds.c                | 5 +++++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 65b3357..bfff2ec 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -139,6 +139,7 @@
 /* Supplemental Configuration */
 #define SCFG_BASE		0x01fc0000
 #define SCFG_USB3PRM1CR			0x000
+#define SCFG_QSPICLKCTLR	0x10
 
 #define TP_ITYP_AV		0x00000001	/* Initiator available */
 #define TP_ITYP_TYPE(x)	(((x) & 0x6) >> 1)	/* Initiator Type */
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index b3bd40a..d7acb48 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -26,6 +26,7 @@
 
 #define PIN_MUX_SEL_SDHC	0x00
 #define PIN_MUX_SEL_DSPI	0x0a
+#define SCFG_QSPICLKCTRL_DIV_20	(5 << 27)
 
 #define SET_SDHC_MUX_SEL(reg, value)	((reg & 0xf0) | value)
 
@@ -219,6 +220,10 @@ int board_init(void)
 int board_early_init_f(void)
 {
 	fsl_lsch3_early_init_f();
+#ifdef CONFIG_FSL_QSPI
+	/* input clk: 1/2 platform clk, output: input/20 */
+	out_le32(SCFG_BASE + SCFG_QSPICLKCTLR, SCFG_QSPICLKCTRL_DIV_20);
+#endif
 	return 0;
 }
 
-- 
2.1.0.27.g96db324